Absorbers - Import export

Absorbent Meat Pads for trays. Black 150 x 200 White 100 x 150 Packaging / box

Industrial shock absorbers are maintenance-free, ready to install hydraulic components. They have an integrated fixed stop. The adjustable version enables precise adjustment to the desired dampening level. After installation, operate and adjust the shock absorber a few times until the desired braking level is achieved. Exceeding the max. energy intake per hour is possible if temporarily disconnected or the shock absorber is cooled with cylinder exhaust air. The installation position is arbitrary.

PRODUCT AVAILABLE IN WHOLESALE. CONTACT US ON WHATSAPP +33744081195

Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

It is covered with acoustic soundabsorbing fabric which is resistant to impact on the front surface of the fabric covered wall panel and the inner material of the panels is glass wool. The rear surface is covered with glass cloth. Fabric Coated Wall Panels normally used on walls to ensure sound insulation and decorative, but can also be applied in ceiling. Special production can be done but in general sizes are standard. You can reach the gauge from below. Thickness is not noticeable in sound absorption, but it is more effective than the thicker one. If you want, you can get different designs with different thicknesses. Besides the sound absorber, fabric coated acoustic panels can be used on the final layer with a decorative appearance and are easily applicable on concrete or plasterboard surfaces

Water-miscible high-performance cooling lubricant Description Castrol Alusol SL 51 XBB is a water-miscible high-performance cooling lubricant that was designed without boron and formaldehyde releasers. It contains an additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol SL 51 XBB is suitable for both central systems and individual systems. Application Castrol Alusol SL 51 XBB has been specially designed for processing iron and aluminum alloys.

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

40% polyester (COOLMAX®) , 30% cotton, 27% polyamide, 3% elastane. Anatomical formed rib-knit in the middle of the foot. With full-terry sole and paddings - protecting and shock absorbing. 40% COOLMAX. Packed separately (each pair in plastic bag). Sizes: 35-38, 39-42, 43-46, 47-49. Colors: Black, Khaki, Navy-Blue, Camel, White. COOLMAX® is a functional fiber with enhanced moisture-wicking characteristics - sweat is released easly. Therefore COOLMAX®-textiles take care of a good and dry footclima. Easy-care. Perfect for sport and outdoor clothes. COOLMAX® is a trademark of The LYCRA Company®.

45x30cm hand towel in absorbent and soft microfiber of high quality -345g/m2- in varied colors. Presented inside a PVC bag. PVC bag Microfibre 345 g/ m2

Product group: DyesCellular Assays/ Detection-Labeling- kits Storing temperature: 2-8°C Shipping condition: ambient

Orange paper for trays that absorbs liquids from meat. Available in a 10 kg package. Dimensions 30 x 40 and 60 x 40

micromfiber 3100gr/m² Absorbs very well water, flexible backing, round corners, machine washable by 30°C. Art. 377116: 40x60cm anthracite Art. 377123: 40x60cm beige Art. 377215: 50x80cm anthracite Art. 377222: 50x80cm beige Art. 377314: 60x100cm anthracite Art. 377321: 60x100cm beige

micromfiber 3100gr/m² Absorbs very well water, flexible backing, round corners, machine washable by 30°C. Art. 377512: 40x60cm anthracite Art. 377529: 40x60cm brown Art. 377611: 60x80cm anthracite Art. 377628: 60x80cm brown Art. 377710: 80x120cm anthracite Art. 377727: 80x120cm brown Art. 377918: 90x150cm antracite Art. 377925: 90x150cm brown

Bentonite clay is a natural mineral and has a layershaped construction. The moisture is absorbed between these layers. Bentonite clay is an economic solution for temperatures up to 50 °C. When temperatures rise above 50 °C, benonite clay releases the moisture it has absorbed back to the air. With baking at a temperature of 120 °C, this desiccant can be reactivated to be reused. Zeolite molecular sieves are crystalline, highly porous materials, which belong to the class of aluminosilicates. As part of the manufacturing process, the pore size on the molecular sieve particles can be controlled. This allows a selective adsorption of a wide range of organic molecules as well as moisture. They adsorb moisture more rapidly. They will reduce moisture to much lower levels, making their use essential when a very dry product or atmosphere is required. They perform more effectively as moisture adsorbers at higher temperatures.

100% polyester (75D / 72F) can be used under class 1.000 up to class 10.000 wipe is washable, with negligible deterioration in its performance Soft and nonabrasive on surfaces; good absorbency rate low particulates and ionic contents

made of microthin fibers with highest degree of cleanliness superior moisture and oil absorbency The unique construction of fibers absorbs up to 50% more compared to ordinary polyester wipers. nonabrasive complys with ISO requirements of Class 4 and FEDSTD209/D Class 10

Spread is a quality alternative to butter with a balanced composition. Food components of animal and vegetable origin are used for the production of the product. Thanks to their rational ratio, the spread has improved characteristics, it is well absorbed, and its use has a positive effect on the human body. The spread has a light, plastic consistency and high taste qualities. A reduced level of fats of animal origin reduces the risks of raising cholesterol. The high content of unsaturated and polyunsaturated fatty acids, vitamins and microelements should be noted among the useful properties of the food product. Impulse Commodity Trading offers its customers spreads of various types – cream-vegetable, vegetable-cream and vegetable-fat. All products are of high quality, which is confirmed by relevant certificates. If you are interested in the product and want to know the details, contact us on the phone indicated on the website.

Oxygen Absorbers can be used in a wide variety of environments. We offer solutions for e.g.: Consumer packagings Gas-flush packagings Medical equipment Food products Pharmaceutical products Oxygen Absorbers are added to reduce the oxygen level inside the packaging. They are used to maintain product safety and extend its shelf life. There are many types of oxygen-absorbing products that are suitable for a wide range of applications. The components of the Oxygen Absorbers vary depending on the intended use, the amount of moisture present inside the product and other factors. Oxygen Absorbers are used for the absorption of excess oxygen.

We produce an high effective industrial oil absorbent on basis natural peat moss. Oil absorbent ARCTIC has ability to biodegradation. Due to its excellent buoyancy, it is successfully used not only on soil and any hard surface, but is also especially effective on water. Oil absorption is 8-10 g oil per 1 g absorbent. Oil absorbent ARCTIC environmentally friendly, non toxic, absolutely safe for humans and animals. After use, it can be disposed of as a high-calorie secondary fuel when burned in boiler plants.

Shock Absorber Front Left/Right Master 3-2.3 DCI 543029774R Master III- Movano 2010

Shock absorber Original and aftermarket

with expanded clay or with mineral wood fibres The factors that mostly affect the efficiency of acoustic barriers are sound-insulation linked to the masses involved and sound-absorption linked to the porosity and shape of the materials. The noise barrier consists of two layers, one of normal reinforced concrete with a density of 2200-2400 kg/mc, having a supporting function, one of light porous concrete with a density of 900-1100kg/mc. FIP and TECNOACUSTICA offer a noise barrier consisting of a 100mm-thick prefabricated structure of self-stable reinforced concrete and a Greek-fretted facade made of lightweight concrete panels with expanded clay and/or mineral wood fibres for a total thickness of 120mm.
The standard length of panels is 292 cm, which permits a typical centre distance of 3 metres. In terms of height, standard measurements of individual panels are 1.5 metres and 2 metres. Panels are fitted onto metal frames that are dimensioned so as to withstand the stress resulting fro

The panels have standard dimensions with heights ranging from mm 1000/1 250/1 500 and lengths from mm 2950/3950; they can be made to be housed inside HE12O/1 40/1 60 profiles. The panel frame consists of horizontal and vertical beams with different insertion sections of mm 100 for HE 160 profile, mm 80 for HE 140 profile and mm 60 for HE 120 profile; The 20mm-thick rear side, representing the sound-insulating part of the barrier, consists of a battened or tongue&grooved matchboard. Inside the panel sound-absorbing material - mineral wool - with density 90 kg/mc, thickness 50 mm, supported by wooden pads to create an inner tube suitable to enhance the acoustic features: the sound-absorbing material is protected by a green or black smoke- and UV-resistant silicone net with 90% fine weft. The front face has slats for aesthetic/wool keeping purposes, which can be mounted diagonally, vertically or horizontally. An "EPDM" seal is fitted on the vertical sides of the panel front to lock