Welding machines for plastics - Import export

The new generation of plastic welding machines of the OMEGA 4 series combines technical standards at the highest level with ease of use. The modular arrangement of the machine components, consisting of press, control and generator, enables easy adaptation to the respective plastic part and the respective location. Simple system operation is guaranteed with the multilingual touchscreen With this standard machine, even the most difficult welding tasks can be mastered reliably thanks to their performance and control and monitoring options. The X series is the premium version of the Omega series. This series is also equipped with a proportional valve for a defined pressure control. In addition, this Omega series has a pneumatic pressure / counter pressure system and thus ensures smooth movement even at low pressure.

The KLN QSW 400 L is a modular laser welding machine. The advantage of the modular structure is that the central laser welding machine can remain unchanged in the various welding tasks and only the housing and its frame structure must be adapted to the actual welding task. Thus, a well-tried laser welding unit can always be used. Moreover, adaptions to other welding tasks can be easily integrated, e. g. with rotary table, tool carrier, conveyeor or sliding table. Laser: Water-cooled diode laser with 300 W optical output power Wave length 980 nm ±10 nm Pilot beam at 650 nm ±15 nm (<1 mW) Optical fibre suitable for wave length 780-1030 nm Focal distance of collimation 58 mm Focal distance f-theta objective 635 mm Operating distance 728 mm Operating field (scan field) 415 mm x 415 mm

The new generation of plastic welding machines of the OMEGA 4 series combines technical standards at the highest level with ease of use. The modular arrangement of the machine components, consisting of press, control and generator, enables easy adaptation to the respective plastic part and the respective location. Simple system operation is guaranteed with the multilingual touchscreen With this standard machine, even the most difficult welding tasks can be mastered reliably thanks to their performance and control and monitoring options. The S series is the standard version of the Omega. An ultrasonic high-performance generator and and a separate control with a larger touch panel are available. There are also 12 program memories available. The separate control also enables the process data to be read, the travel distance to be measured and greater connectivity.

The new generation of plastic welding machines of the OMEGA 4 series combines technical standards at the highest level with ease of use. The modular arrangement of the machine components, consisting of press, control and generator, enables easy adaptation to the respective plastic part and the respective location. Simple system operation is guaranteed with the multilingual touchscreen With this standard machine, even the most difficult welding tasks can be mastered reliably thanks to their performance and control and monitoring options. The A series is the basic version of the Omega. Time and energy measurement are available for process monitoring. Compared to the S-du X-series, the generator and control are combined. This makes the A-series more compact, but limits the number of welding modes and storable programs.

The REK-B offers all advantages of the high technical level of the OMEGA III series, particularly regarding precision and reliability. The machine may be integrated in an automatic production line and controlled via a higher-ranking control system (PLC). Options: • Hydraulic oil brake • Working table • Housing • Light curtain • Rotary table • Control of external periphery Advantages: • Easy programming via touch panel TP 270 • Display of time-travel curve and pressure-time curve after the welding cycle on a graphic display with plain text. • Regulation of the welding forces via proportional valve technology. • The machine REK-B offers many possibilities for analysis, control and regulation. • Three welding models in order to meet the requirements of each application • Positioning of the spin head prior to and after the welding process • Display of the ongoing process parameters ( welding travel, -time).

WELDING MACHINE FOR PLASTIC + 1kg OF PROFILES A plastic welder is a very useful device for everyone who needs to connect plastic elements in a short time. The welder has a smooth adjustment of the force and temperature of the blown air. It is equipped with an automatic cooling system after the end of work, which has a significant impact on the life of the heater. The temperature and airflow power are adjusted by means of knobs.TECHNICAL DATA: Infinitely variable hot air temperature: 200-480 ° C Air flow max: 120L / min Air blower: compressor - brushless fan Power supply: 220V Tip power: 60W Device power: 700W Length of the stock with the cable: 120cm Dimensions: 138 x 100 x 150 mmThe composition of the set: plastic welder 858 round nozzle 5mm round nozzle 7mm round nozzle 10mm square nozzle 13x13mm 5mm long nozzle, bent at an angle of 45 degrees 20 different binders = 1 kg

The most simple way of welding thermoplastic materials is to use the ultrasonic manual welding device. This is particularly well suited for applications in prototype design, for processing of single products, small series and repairs. Regardless of caulking, swaging, staking, cutting, or spot welding, the HSG ultrasonic manual welding device is easy to use, provides variable power rating, and can be equipped with all types of conventional sonotrodes (35 kHz).

Simplicity without having to abandon the proved Herrmann Ultraschall standards – that are the characteristics of this machine type. Proportional valve technology and digital high-performance generators are basic equipment. A solid machine design with precision guiding rails and proved drive components are the foundation for quality and repeatable welds.

The name delivers what it promises. The ultrasonic welding machine HiQ VARIO can be configured to completely suit the customer’s needs. A large number of pneumatic drive modules with different strokes and cylinder diameters are available, always including the reliable proportional valve technology by Herrmann Ultraschall.

The core of this ultrasonic welding machine is the patented pneumatic HMC drive concept. It combines the benefits of pneumatics with the dynamics of an electrical drive and allows for selection of any optional start point for the weld process. The SoftTouch mode protects the sensitive joining area of the plastic parts to be welded during contact of the sonotrode.

Robustness, accuracy, and simplicity are attributes characterizing this ultrasonic welding machine. The entry-level models already include a position measuring system and proportional valve technology as basic equipment. Moreover, password protection and part counter are standard. Precision guiding rails and reliable drive components ensure repeatable welds.

Basically the TOOLMASTER versions vary by their tool design, their size of useable surface and the degree of automation. All versions are suitable for high temperatures and optionally equipped with fire protection engineering, which quickly separates the tool in case of energy drop or timeout. KLN also manufactures special machines adapted to your individual requirements. TOOLMASTER "Basic" as well as type HE 50/30 are standard machines. The versions "Advance", "Semi-Automatic" and "Automatic" are made with tools in sandwich design. This makes possible the handling of upper tool, hot plate element and lower tool as a compact unit. They are designed particularly for quick and frequent production changes. The HE/SA has a horizontal concept with servo-drive technology for quick and precise movements. The TOOLMASTER CC has been developed for applications with two welding tasks in one cycle. Almost all machine versions can be provided with pneumatic or servo-motor drives.

with 6kW fiber laser and MP Flex loading and unloading for sale in top condition. C0z3xdk3ol

GOGS CO., LTD. has received presidential award in 2008 for our patent technology at KINPEX. Our machine is highly specialized in heavy industry such as marine engineering, shipbuilding and etc. Our machine SHI(Samsung Heavy Industry), STX shipbuilding, Seongdong Shipbuilding & Marine Engineering, Hanjin Heavy Industries and etc. - 2-CORE control using PLC-CSI communication technology - High quality welding of 1mm thin plate at a distance (up to 100mm) - Lightening and decrease in failure rate using the All In One Cable - Multi-feeder that is possible to set operation conditions of a welding machine (Control of crater current and voltage, Power supply for auto carriage providing error messages) - Memory function of welding conditions - IoT function for smart control - Maximization of interlocking with auto welding machine (Smart welding Integration System(C-SWIS)

We offer high-quality ultrasonic welding, using market-leading production machines.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

You can rely on us for traditional laser work. We offer our advanced flatbed laser services, powered by the powerful FinPower L6 laser. This reliable machine takes your sheet metal processing to new heights, with the capability to cut and shape sheet material up to 15 mm thick with precision. The impressive power of our L6, driven by a 4 kW CO2 laser, allows you to maximize your projects. Additionally, we offer the flexibility to engrave unique part numbers, giving you control over the identification of your pieces. In our workshop, your pieces can be further processed with machine sanding and deburring, eliminating the need for post-processing. This allows us to provide a complete solution for your projects. Discover the versatility of our laser services and the comprehensive support we offer.

Our laser tube cutting service includes all major tube and section profiles – including large tube laser cutting – with specialist profile capabilities accommodated with ease. Continuous investment ensures we can always offer our customers the broadest capabilities, so they remain at the forefront.

Achieving a cutting tolerance of +-0.25mm, lasers are firmly established as the accurate cutting technology. Capable of achieving fine contours and intricate cuts in seconds, laser cutting is leading the way in manufacturing efficiency gains.

The device is used as hand pistol for riveting, welding and edge folding of plastic parts. The weight of the welding pistol is lower than 900 g. The optimum design of the welding pistol allow for a particularly comfortable handling. The titanium booster ensures a maximum safety of the converter and optimal adaptation to the various tools. Advantages of the SPK version: By the permanent cooling of the piezo-ceramic transducer and the titanium booster an extremely high performance period can be achieved. The cooling air pipe is integrated in the HF control cable. Advantage: No disturbing connective elements for a separate pipe, and the cooling air is led directly to the spots to be cooled.. For this the grip is fitted with an exhaust port for the cooling air, into which cooling pipes can be simply screwed in. In this version the generator is also cooled by an incorporated ventilator. As an option we can offer hand welding devices with energy control

We produce electrofusion machines that can weld diameters from 20mm to 1600mm.

Welding construction as required No matter whether pipes, small parts or large components - the welding construction department of Siempelkamp Maschinenfabrik GmbH is able to fulll your wishes thanks to its high-performance machinery. Our welding specialists are able to produce your components using MIG, MAG, UP, TIG, Emanual and electro-slag processes. Numerous certicates attest to the highest quality of our welding work. Key features procedure: MIG, MAG, UP, TIG, E-manual, electro-slag Component weight up to 100 t Pipe forming up to Ø168.3 mm Pipe neck up to Ø270 mm Advantages procedure: MIG, MAG, UP, TIG, E-manual, electro-slag Component weight up to 100 t Pipe forming up to Ø168.3 mm Pipe neck up to Ø270 mm Application of the most ecient welding process for your component Highest quality standards through certied welding work economic production of tubes by our forming and necking machine

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions.

ТОРУС-200 is a modern welding inverter device based on a digital high-frequency mains voltage transducer. The device is designed for electric arc welding of low-carbon, alloy and stainless steels, it can operate in TIG and MMA modes. Obtaining high-quality welding joints does not require high qualifications from the employee, which is important for novice welders. In short-circuit mode, the device almost does not consume current, which allows it to be powered from petrol power units with a capacity of 4 kW (6 kVA) and a household network with slumps up to 165 V. ТОРУС-200, like other inverter welding machines of the ТОРУС line, allows you to get welding with stable parameters. It is characterized by: small weight – 5 kg, high performance factor and the ability to work with electrodes with a thickness from 1.6 to 5 millimeters. In addition, the ТОРУС-200 welding inverter is designed for continuous operation not only indoors, but also outdoors.

The Frame Welding Machine is made of welded parts of different sizes and is designed to obtain the desired special H profiles. The machine body and the welding heads are fixed and the workpiece provide to be welded on both sides of the part to be welded by moving by means of driven conveyors. The hydraulic cylinders in the system provide the positioning of the H profile placing and fixing during welding.The system has adjustable backrests and accessories for the roofing of the conveyor group.The system has a hydraulic piston loading unit. The system might turn beam 90 degree with maximum weight and maximum dimensions by means of chain or mechanical structure.

Length Welding Machine is designed for length welding of cylindrical, conical and rectangular bent parts and flat plate sheet metal and plates. Parts between 100-3000 mm diameter can be welded on different machine types. The length welding machine, which offers the ability to make welds internally and externally, is produced from 1 meter to 4 meters long. In some special cases, the length may increase even more. Currently, workpieces with a minimum wall thickness of 0.60 mm can be welded. In submerged arc applications, the wall thickness is up to 20-25 mm. Boilers, water heaters, solar energy boilers, cooling tanks, natural gas chimneys, LPG tubes etc. Length welds of materials are made on this machine. Submerged arc, gas metal, tig etc. Welding systems work synchronously with our machine.

It’s designed upon you weld cylindrical, conical and rectangle shaped bended frameworks and in shape of flat slab metal sheet and plaque linearly. Frameworks that are between 200-3000 mm diameters can be welded on different types of machines easily. Its production can be made from the length of 0.5 meter to 4 meters. Upon customer demand the length can be increased. As to application method, TIG, MIG and submerged welds can be adapted. Materials’ like boiler, thermosiphon, solar power boilers, cooling tanks, natural gas funnels, lpg tubes etc., height welds are made on this machine.