Welded valves - Import export

Product Descriptions 1) TOTAL 20 Types One-Piece Hex Welding Ball Valve, One-Piece Hex Ball Valve (Threaded +Welding), One-Piece Ball Valve Two-Piece Ball Valve(10K), Two-Piece Ball Valve(20K), Two-Piece Ball Valve(Steam) Two-Piece Ball Valve (Long Stem Neck), Two-Piece Ball Valve (Full Bore), Camlock Quick Ball Valve Angle Ball Valve, Two-Piece Sanitary Ball Valve, Three-Piece Ball Valve (Threaded Type) Three-Piece Ball Valve(Welding Type), Three-Piece FxW Ball Valve, Three-Way Ball Valve(L Type, T TYPE) HI-DR Ball Valve, Press Joint Ball Valve(Long Stem Neck), Gate Valve, Swing Check Valve, Strainer 2) Size : 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 3" 3) Applications - All stainless steel pipes, Sanitary valve for food industries - Hot and Cold water for industries and waterworks, Oil pipelines (Neet to change the gasket) 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10 bar, 20 bar, 30 bar

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

Solenoid valves are designed for shielding gases in welding devices. Solenoid valve type: AC 24V Catalog number : EZAC24V Supply voltage (V): AC 24 50Hz Coil power (VA) : 6.5

The GEMÜ 687 2/2-way diaphragm valve has a low maintenance plastic membrane actuator and is pneumatically operated. The valve has a metal distance piece. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. —The modular actuator system permits a variety of options to be used such as tank bottom valves, T valves, sampling valves, multi-port valves and tandem welded configurations —Optional flow direction and installation position

Flange Body Ball Valves with Butt Weld Ends BBVF2A ▪ Two-way high-pressure round body ball valves designed for use as on/off devices for hydraulic applications ▪ With flange connection according to STAUFF standard and butt weld ends ▪ Pressure range: up to 345 bar / 5000 PSI (depending on size and material combination of the ball valve)

304 stainless steel tank Model SPABP1500 Pneumatic system Capacity 1500 L On welded feet Rounded bottom Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 Clear drawing with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet (tank without level

316 stainless steel tank No valve (to be mounted) Model MTLM1250R Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Double wall height 900 mm (3/4 "M. GAS inlet / outlet) Hole for the agitator included diam. 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet nameplate

304 stainless steel tank Model MTLM1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet nameplate

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet

316 stainless steel tank Model MTLM1000R Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Double wall 750 mm high (3/4 "M. GAS inlet / outlet) Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet Nameplate

304 stainless steel tank Modèle MTLM1000 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet nameplate

316 stainless steel tank Model MTLM750R Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Double wall height 500 mm (3/4 "M. GAS inlet / outlet) Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet Nameplate

304 stainless steel tank Model MTLM750 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet Nameplate

The REK-B offers all advantages of the high technical level of the OMEGA III series, particularly regarding precision and reliability. The machine may be integrated in an automatic production line and controlled via a higher-ranking control system (PLC). Options: • Hydraulic oil brake • Working table • Housing • Light curtain • Rotary table • Control of external periphery Advantages: • Easy programming via touch panel TP 270 • Display of time-travel curve and pressure-time curve after the welding cycle on a graphic display with plain text. • Regulation of the welding forces via proportional valve technology. • The machine REK-B offers many possibilities for analysis, control and regulation. • Three welding models in order to meet the requirements of each application • Positioning of the spin head prior to and after the welding process • Display of the ongoing process parameters ( welding travel, -time).

SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN 6 – DN 200 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free

SISTO-CM214 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

SISTO-CBAV ● tank valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank, multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN150 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

SISTO-CM508 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN 6 – DN 200 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free

SISTO-CM1200 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

SISTO-CM409 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

SISTO-CY ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN 6 – DN 100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free

SISTO-CT ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6 – DN150 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free

SISTO-CM601 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

SISTO-CM700 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design

Ball Valves Fully Welded Body Construction

Bag Fill Modern, flexible, customer-oriented Technical data Container types Valve bags, open bags, cardboard boxes, drums and fiber drums Container fastening: Plastic bags, welded; paper bags, sewn; valve sacks, valve welded or folded; cardboard boxes / drums tied with liners so they form goosenecks and then fastened with clips Product-contacting parts: Stainless steel, partially electropolished Feeding: From 100 m³ silos, alternatively from Big Bags, octabins, bags or cardboard boxes Number of filling lines 12 Contract filling plants Dosing screw scales, turbine packers, compressed-air packers, vacuum packer, downpipe packers Supplementary: Position of scrap metal boxes as transport containers in reuse of transportation boxes Areas of application Filling of cardboard boxes Filling of fiber drums Filling of valve bags and open bags (5-25 kg bag weight) Filling and palletting of special bags Filling of thin-walled bags (EVA bags) Prospect for download

Our radiator valves DIN 42560 type A and type A OR are designed to be welded onto the transformer wall or on connection pipes. The radiator will be flanged on the four M16 holes (PCD=160 mm). The housing of the radiator valve is made of forged steel S355J2G3 and thus not subject to any leakage as it may occur with casted housing. Due to the metal sealed clap a low leakage is permitted while the soft-sealed radiator valve is absolutely oil- and vacuum-tight. Both types are absolutely tight in operation condition to the outside. Our welding neck radiator valves DIN 42560 type A NW 80 fulfil the tightness requirements and operating conditions in accordance with DIN 42560 as well as EN 50216-8.