Wax processing - Import export

Silicone molds are essential tools in the world of sculpture and reproduction of pieces. They allow you to create precise copies of sculptures, decorative objects and other items. Here is some information about silicone molds: Molds are used to create copies of the original wax sculptures. Silicone molds are made from a flexible and malleable material such as silicone rubber from an original sculpture in clay, plaster or another equivalent material such as plasticine. Apart from the lost wax casting process, they are used to create decorative objects such as vases, statues, ornaments and other decorative objects.

OTHER PRODUCTS * LABSA * LAB * Zeolite ( Sodium Alumina Silicate ) * Detergent Base Powder * SLES * Hydroxen Peroxide * Ethyl Alcohol * Methyl Alcohol * Iso Buthyl Alcohol * Iso Propyl Alcohol WAXES AND PROCESS OILS * Paraffin Wax ( Various Grades ) * Slack Wax ( Various Grades ) * RPO ( Rubber Process Oils ) OILS AND GELS * Base Oils ( Virgin / Recycled and Regenerated) * Liquid Paraffin Oil * White Oils * Petroleum Jelly ( Vaseline ) BITUMEN * Bitumen ( Both in Bulk and in Drums ) * Oxidized Bitumen

1, Lose Wax Process(soluble glass): wax injection, wax welding, dipping, sand-coating, shell-making, dewaxing, cleaning, pouring, cutting, reshaping, machining. 2, Materials: carbon steel, alloy steel, cast iron, cast steel, pig iron, grey iron, ductile cast iron and so on. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by experienced technical staff. 5, Production capacity: more than 8,000MT per year. 6, Small orders accepted. 7, Perfect facilities. 8, Advanced machining equipment. 9, Material standards: GB,DIN,EN,NF,ISO,JIS,SS,BS,AISI,SAE,ASTM,UNS,ACI.

1, Lose Wax Process(soluble glass): wax injection, wax welding, dipping, sand-coating, shell-making, dewaxing, cleaning, pouring, cutting, reshaping, machining. 2, Materials: carbon steel, alloy steel, cast iron, cast steel, pig iron, grey iron, ductile cast iron and so on. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by experienced technical staff. 5, Production capacity: more than 8,000MT per year. 6, Small orders accepted. 7, Perfect facilities. 8, Advanced machining equipment. 9, Material standards: GB,DIN,EN,NF,ISO,JIS,SS,BS,AISI,SAE,ASTM,UNS,ACI.

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Get the smoothest skin and the freedom to wear any look, any time with Veet. Make Veet your best friend and you’ll never ever have any embarrassing hair moments. Veet ReadytoUse Wax Strips are a perfect solution when going to the parlour is not an option. It effectively pulls out as short as 1.5mm short hair, giving you up to 4 weeks of lasting smoothness and instantly exfoliated skin, whenever you want. And they’re easy to use, any time. These waxing strips, as the name suggests are great for instant use and does not require heating, which means, no mess! Dead skin cells tend to accumulate on our skin surface regularly, making it necessary for us to wax and remove not just the hair but dead cells that make the skin look dull and dry. Veet readytouse wax strips can help exfoliate the skin while it also removes hair just perfectly. It comes with an easy grip tab that makes the waxing process quicker and simpler. Specially formulated with Shea Butter, known for its moisturizing

Spacewax 300 is a release agent in the field of thermoset processing. It can be used for castable or spreadable polyester-, epoxy- and DCPD- resins. The operating temperature range of Spacewax 300 is between room-temperature and +140°C. Processed correctly, Spacewax 300 will leave a high gloss surface.

Spacewax Sealer is a wax-based mold sealer and release agent in the field of thermoset processing. It can be used for castable or spreadable polyester-, epoxy- and DCPD- resins. The operating temperature range of Spacewax Sealer is between room-temperature and +200°C. Processed correctly, Spacewax Sealer will leave a high gloss surface.

Slack Wax The by-product from the solvent de-waxing process provides a broad range of melting points and physical and performance characteristics that are suitable for use in various products and process applications. This product is used as blending components or waterproofing agents in the manufacture of various industrial products such as candles, polishes, matches, inks, and carbon paper, and externally can be applied as good dust suppressants or controlled-release agents for various chemical and fertilizers. We can propose a suitable offer based on your needs. Please feel free to contact me if you need any further information. Mobile: +905318337385 Email: y.nazari@tedoraco.com Website: www.tedoraco.com

System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.

The PMMA BLANK is developed to be used in milling machines for making temporary restorations, for gingiva formation after placing dental implants and for accurate determination of the occlusal contacts before placing zirconium prosthetic structures. The WAX BLANK are used in the fabrication of wax modeling, in the lost wax process for casting, making denture restorations and for frameworks for crown and bridge models . It was developed for cast and pressing techniques.

Natural oil is formulated from winterized raw CO2 extracts and base oil. After the 1st stage of winterization (partial removal of waxes from the extract, using ethanol and low temperatures) of raw CO2 extract, most of the waxes are removed. Extract becomes fully liquid and homogeneous. Therefore the liquid extract is easily mixed with oils which allows us to achieve high CBD/CBG concentrations, and maintain the fluidity of the product. The wax removal process used in Natural oil formulations distinguishes us in quality of product from the majority of the market. Natural oils contain chlorophyll, they are mildly bitter in taste and dark green in color. Variations of color and taste depend of the potency of the product and batch of extract. The product is nondecarboxylated and contains neutral and acid forms of CBD/CBG (i.e. CBD/CBG and CBDA/CBGA).