Water cutting machines - Import export

The PFOS oil separator as an alternative to oil skimmer The Profluid oil separator clean the cooling water of cutting machines in approx. 2 hours. Due to their well thought-out design they are very easy to operate and maintain. The oil separator separates oil and cooling water by means of a porous filter. This porous filter has an effective resolution and works without clogging. By the difference of the specific weight the oil drives the surface. The result is an easy separation and removal of the oil. Regular cleaning and separation of oil and emulsion prevents health problems for your employees. Another positive aspect is the increase in the service life of the cooling water. Cooling channels can become clogged due to contamination of the cooling water. This can be prevented by cleaning the cooling water. Excessive wear of machine parts and corrosion on workpieces can also be the result of contaminated cooling water.

Pure water jet cutting machine MDE range allows VHP pure waterjet cutting. Available with different pumps and options, it is designed mainly for tissu and leather industries. Structure : - frame single block in welded steel - mobile gantry in welded steel - stainless steel tank - plastic or aluminum honeycomb coating - 3-turn rotary table for cutting / loading and simultaneous nesting / unloading (MDE-R only) Kinematics : - guidance by stainless steel precision linear rails with preloaded ball slides - XYZ transmission by pre-loaded ball screws (double X-axis motorization) - motorization by AC brushless motors - rotative table with cross-roller crown (MDE-R only) Numerical control : - Numerical control MECANUMERIC CN7000 ISO with 40 Gb hard disk - MHI on control desk with a 15-inch touch screen - Data input by Ethernet link, USB port Features : TYPE MDE MDE-R X-axis travel in mm 1005 1050 Y-axis travel in mm 755 750 Z-axis travel in mm 75 50 Max. speed in mm/sec 30...

AMU - Abrasive Mixing Units higher 700 bar. The AMU series was standardised for various industrial application ranges. Amongst these are the decommissioning and maintenance of offshore structures and plant in the petrochemical and nuclear technology industries. Also special applications, in the wind power industry or for structural or civil engineering are not uncommon. The unit designation always refers to the maximum working pressure and the gross capacity of the pressure vessel. In combination with a conventional high-pressure pump, the various pressure levels and nozzle diameters can be individually adjusted to the task in hand. Our cutting devices and equipment help to control the cutting processes with our water jet cutting systems (AMU higher 700 bar) from a large distance.

Range of products manufactured mainly in the USA. Decades of experience in the development and manufacture of components and waterjet cutting systems, allow us to present our customers with high performance solutions at reduced costs.

Finecut 3-Axis Waterjet Machine, a Premium Micro Abrasive Waterjet, Beyond Cutting Edge. Cutting width down to 0.2 mm Designed for ultimate precision cutting Highly dynamic and fully encapsulated motion system Flexible fixtures for different applications Intuitive HMI Easy set-up. Easy to operate. Easy to service. Ultra-High Precision Water Jet Cutting Machine – with Finecut™ WMC 500 II Waterjet Machining Center … BEYOND CUTTING EDGE Micro Abrasive Waterjet technology is the proprietary cutting system of Finepart. It was developed to accompany the Finecut Waterjet Machining Center and together they bring the waterjet technology to a whole new level of precision cutting. The micro abrasive waterjet process is a particle erosion based, non-thermal cutting process. This process can cut virtually all materials and produce an excellent surface finish that does not change the material properties.

Finecut 5-axis waterjet cutting machine is a premium micro abrasive waterjet, for fast cutting without taper. Ideal for volume manufacturing purposes Ideal for cutting complex shapes Cutting width down to 0.2 mm 5-axis cutting with tool center point control Corner optimization by waterjet motion strategy Compared to traditional cutting methods, the 5 axis waterjet technology has the cutting edge capabilities of combining increased cutting speed, ultra high precision, and three dimensional cutting, with taper elimination, into ONE cutting edge waterjet machine, the Finecut WMC500II Ideal for volume manufacturing purposes Cutting twice as fast, compared to 3 axis cutting Ideal for applications that requires complex cutting 3D abrasive cutting capabilities Ultimate taper control and taper elimination Able to cut materials both soft and hard materials

Finecut 4-Axis Waterjet Machine, a Micro Abrasive Waterjet, Beyond Cutting Edge. Precision with rotating work piece 4 axis working synchronously Cutting width down to 0.2 mm Live fixturing for cutting part from different sides Rotates workpiece synchronously with cutting High inclination angles Utilizes 5-axis control with tool center point function Cutting With 4 Axis Rotary Table The A-axis can be fitted with a work table plate on which any work piece can be placed. With this mechanism the part can be reoriented to provide access for cutting from different sides of the part. This motion system setup allows the waterjet nozzle to cut along a contour, following the part’s 3D curvature, moving all four axis in synchronous motion. Easy CAD/CAM Programming The machine has a 5-axis waterjet controller with capability for tool center point programming. All these operations are easily programmed using the CAD/CAM software provided with all Finecut waterjet machines.

High Speed Complex Precision 5 Axis Waterjet Cutting Technology, Ideal For Prototyping Ideal for prototyping or one-off parts and cutting highly complex shapes, with cutting width down to 0.2 mm. 5-axis cutting with tool center point control and corner optimization by waterjet motion strategy. Cutting width down to 0.2 mm 3 dimensional cutting 5-axis cutting with tool center point control High inclination angles and complex shapes Perfect for prototyping FINECUT MICRO ABRASIVE WATERJET TECHNOLOGY Advantages and Capabilities Increase Your Productivity, Cutting Speed, Precision, While Doing Complex Cutting. Ideal for prototyping Ideal for applications that require complex cutting 3D abrasive cutting capabilities Cutting 2X as fast, compared to 3 axis cutting Ultimate taper control and taper elimination Able to cut materials of almost any kind, both soft and hard materials

Band saw machine for wood cutting

As a pioneer in autogenous welding, ZINSER has been offering cost-effective solutions for the use of acetylene and other gases for over 120 years. Our autogenous CNC cutting machines are known worldwide for their reliability, cutting quality and robustness "Made in Germany". As an innovation-oriented company, ZINSER is constantly evolving to offer its customers individual cutting solutions. We therefore offer combined flame cutting and plasma machines in 3 ranges (compact, economical, premium) as well as many options for our autogenous cutting machines: beveling with triple torch, drilling, marking, pipe cutting, etc.

High-precision plasma cutting machines from ZINSER - efficient cutting solutions for all applications ZINSER GmbH offers a wide range of high-precision plasma cutting machines that are known for their outstanding cutting quality and efficiency. Our systems are specially designed to cut mild steel, stainless steel and aluminum with the highest precision. Thanks to the latest technology and a robust design, our plasma cutting systems ensure maximum productivity and reliability in industrial production. ZINSER 4025B / 4125B / 4026B / 4126B These premium plasma cutting machines offer excellent cutting quality and reliability for demanding applications. They are ideal for cutting thick and thin materials and are suitable for both simple and complex cutting tasks. ZINSER 2315 / 2325 / 2425 / 2426 Our economical plasma cutting machines offer a cost-effective solution without compromising on quality.

The cutting machine M-1600 offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for applications like foils, acrylics, wood and textiles. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Guillotine for industrial hoses •up to 2” (max. OD: 75 mm) •Pneumatic Drive •L x W x H (mm) : 1810 x 325 x 800

The EM 115 is a highly productive hose cutting machine. The machine is best suited for high volume manufacturing of 2" hoses along with workshop capability for 3" high pressure hose and 3" industrial hose. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

For each type of workshop: This cutting machine with its 3 kW drive is also available as an ecoline or DC variant. For hydraulic hoses up to 1 ¼”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

The safe high-quality cutting machine for the production process. All cutting blades are made of carefully tested material which ensures optimum cutting quality. 7.5 kW drive max. For hydraulic hose assemblies up to 3” and industrial hose assemblies up to 4”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

Planetary cutting machine for corrugated metal and PTFE hoses. Cutting results that often eliminate an additional step. This completely unique planetary cutting machine delivers almost scrap-free production and high efficiency. With a completely variable centering clamp system, all hose OD to the maximum rating for the machine can be cut. Approximate cutting time is 25 seconds for 1 ¼“ (ø DN 32). Productive and ergonomic •No dramatic flaring of the stainless steel braid •Reduces or eliminates time-consuming manual preparatory work thereby increasing productivity and lowering costs •Centering hose clamp system •Shortest cut possible from 10 cm •Minimizes personnel costs and preparatory work •No wrapping/unwrapping with adhesive tape required •Clearly laid-out user friendly software on a panel with a 6“ color display screen •Large article memory promotes productivity •Reference run for optimal positioning of the cutting blade for cutting all hose diameters CE compliant

Dimensions range - Maximal - 3210 x 2500, Thickness range - 3 - 19, Notes - Cutting is done by a water jet mixed with abrasive material at high pressure. This method of glass cutting enables performance of more complex shapes than other type tooling we offer. Glass edges cutting of water jet are made in matt and does not require additional treatment.

Where pneumatic tools of the MBS series reach their performance limits, the eccentric cutting machine opens up new possibilities in cutting performance. Instead of a pneumatic cutting tool, the Metzner ST 25 uses an electrically driven eccentric mechanism that carries a punching blade. This enables us to increase the performance of the die-cut into completely new dimensions, of up to 800 cuts per minute. An agreeable side-effect: With the electric drive for the cutting tool, the ST 25 works very quietly – which is why customers with low-noise working environments also like to opt for this model.

The special feature of the Metzner CCM 4: the circular cutting machine handles both wet and dry cutting. Depending on the type of cut, the CCM 4 is equipped with a water-cooling lubrication system or micro-knife moistening and preparation for suction. The standard model comes with an integrated discharge conveyor (800 mm length); application range both in-line and off-line. For tubes with suitable material properties the CCM 4 Gasket offers the possibility to cut flat gaskets with the circular knife. Suitable for tubes with max. 30 or 50 mm diameter and a tube length of 1 mm to 1000 m.

Excellent Head Cutter 14 cm Cutting edge long 23.0mm, similar to a nail clipper, has a slightly curved cutting surface that resembles the shape of a toenail. Can also be used perfectly as a corner nipper. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

The Metzner CCM 2 circular cutting machine processes steel-reinforced profiles and sponge rubber materials with dry cutting (optionally with micro-knife moistening to cool the circular knife). The standard model comes with an integrated discharge conveyor (1300 mm length); range of application both in-line and off-line.

Metzner has developed the mandrel cutting machines of the SR series for cutting off sealing rings from injection-moulded or extruded tubes with different diameters. These machines are characterised by their unique processing method and high cutting quality. First, pre-extended "rubber tubes" are clamped onto mandrels. Due to the special design of the mandrels, the mandrel can be set up and removed quickly and without special previous knowledge. The mandrels are then automatically clamped in the machine between rotating spindles and production is started. A knife carriage travels along the tubes and cuts the flat sealing rings to the desired length with either push-fit or circular knives, depending on the requirements. This cutting method is particularly impressive with its high cutting quality in combination with a high output.

Excellent claw nippers, also called tip cutters, are often used to shorten gel nails.

Excellent nail nippers 14 cm cutting edge straight is a handy, small nail nipper. Due to its straight edge, it is particularly suitable for cutting corner nails or ingrown nails. Also harder toenails can be cut with these pliers without any problems. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Nail Nippers 12.0 cm cutting edge straight is a handy, small nail nipper. Due to its straight edge, it is particularly suitable for cutting corner nails or ingrown nails. Also harder toenails can be cut with these pliers without any problems. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Nail Nippers 10.5 cm cutting edge straight is a handy, small nail nipper. Due to its straight edge, it is particularly suitable for cutting corner nails or ingrown nails. Also harder toenails can be cut with these pliers without any problems. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Product information "Excellent Hautzange 10 cm, Schneide gewölbt 9.0 mm"

Excellent wood razor 17 cm guarantees a particularly close shave. The razor lies very well in the hand and has a long life span.