Water cooling towers - Import export

It is a cooling tower for industries of any type and for any water quality: very compact, self-supporting, light and long-lasting non-corrodible fiberglass structure.

The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood drift eliminators designed for forced draft. Fully enclosed and protected from direct sunlight. Fan unit driven by a variable speed drive. Controlled operation of condenser unit fans. Safe and reliable operation for rental applications. Ease of transportation, handing and protection. Reduces drift to a rate significantly lower than that required by law. Increases safety with respect to microbial growth. Regulates fan speed proportional to sump temperature. Maximises efficiency, minimises noise and prevents overcondensation when coupled with water-cooled chillers.

Compact design and reduced dimensions: a range of evaporative cooling towers with centrifugal fans for special space configurations. MCT-EC version available with electronically controlled fans.

This is a series of large industrial cooling towers for power generation, steel and aluminium processing, cogeneration and other large production sites. Efficiency, high performance, reduced installation and transport costs are granted.

EVAPTON WATER CONDENSERS ARE USED FOR CONDENSING THE REFRIGERANT GAS IN INDUSTRIAL AND COMFORT COOLING SYSTEMS AND ARE MANUFACTURED IN EVAPTON STANDARDS OR IN SPECIAL DESIGNS ACCORDING TO DEMAND. WHILE ECON-C SERIES CONDENSERS ARE PRODUCED FOR COOLING APPLICATIONS USING MAINS WATER OR WATER COOLING TOWER WATER, ECON-M MODEL CONDENSERS ARE PRODUCED FOR SEA WATER OR SALT WATER. IT CAN BE MANUFACTURED FROM 20 KW COOLING CAPACITY UP TO 1500KW COOLING CAPACITY.

AIR- AND WATER COOLED COLD WATER UNITS gwk chillers in the sklc series are air-cooled compact cold water units with integrated condenser gwk chillers in the skw series are water-cooled compact cold water units cooled with external cooling water These chillers are equipped with screw condensers; the power regulation of the capacity to be dissipated is continuous. Water-cooled cold water units in the skw series with low coolant content can be operated very efficiently and are preferably used when the available cooling water from gwk cooling towers, gwk free cooler systems or customer-provided supplies has a higher temperature level than required for the production process but is available inexpensively..

B & V Chemicals have a full range of cooling water system treatment chemicals. This range also contains many specialist products formulated for use in specific specialist situations or for use in response to problematic situations. Our range includes: scale and Corrosion Inhibitors, oxidising and non-oxidising biocides, bio dispersants, antifoams, foaming pack cleaners and on-line descalers.

LX Series is an industrial-level HypoX Sodium Hypochlorite Generator line with a wide capacity range that answers all industrial water disinfection requirements. LX Series is generally used for large-scale water disinfection requirements of municipality drinking water treatment facilities, swimming pools and aqua parks, large-sized industrial process water disinfection, and cooling tower. With its own chemical synergy of Fresh and Mix Oxidants besides hypochlorite, HypoX® LX Series guarantees to solve important problems like Biofilm, Odor, Legionella, and Strong Pathogens. The high disinfection performance of HypoX® LX Series makes it an effective, economic, green, and safe alternative mainly to chlorine and other biocides in chlorination requirements Applications Areas - Large scaled drinking water&wastewater treatment plants - Swimming pools and aquaparks - Industrial process water treatment - Cooling towers - Reverse Osmoses Process water

A light and non-corrodible open-circuit evaporative cooling tower: process industry and HVAC operators will be able to count on its multiple versions and ease of transport and installation.

Complete solutions specifically studied and designed for a more efficient and automatic management of evaporative cooling towers and industrial coolers. Some advantages of integrated cooling systems. - Program and modulate the progress of the machine during its use. - Optimize electricity consumption and water treatment. - Dosage and salinity control. - Water collection. - Remote monitoring and predictive maintenance possibility.

in plastic contrution axial ventilators induced draft anothers models available

Chiller which has a very wide use area and especially preferred for concrete cooling offers direct use in concrete plants as container and modular according to ISO 9001: 2008 Quality Management System. The advantage of fully automatic operation is that it reduces the water by 10 degrees and provides full-time use.

An indirect dry cooling system is characterized by the use of a condenser and air-cooled heat exchangers.The cooling system consists of the following main components :condenser (surface or spray type),cooling water circulating pumps and recovery turbines, if applicable,heat exchanger deltas including louvers,natural draft cooling tower,piping and valves,water storage tanks and transfer pumps,electrical equipment,instrumentation and control,accessories such as cleaning system, nitrogen blanketing system,The warm water from the condenser is delivered to the natural draft cooling tower by the cooling water circulating pumps and an underground piping network. After the cooling in the heat exchangers, the cold water returns to the condenser.

Forced draft cooling towers are specially designed to handle zinc sulphate solutions or highly corrosive liquids. They are equipped with distribution in highly resistant material.EFFECTIVE DESIGN COMBINING performance easy access for easy maintenance - sprayers are accessible without scaffolding and removable minimization of drift losses: 0,001% and lower. SUITABLE FOR HIGHLY CORROSIVE LIQUID WITH 200gl/ sulphuric acid, Presence of fluorine, Crystallization of gypsum

The cooling tower with plume abatement (also called hybrid or wet/dry) is an evaporative cooling tower combined with a dry heat exchanger, used to abate the cooling tower plume. This is the best available solution where local constraints are such that the presence of plume is not accepted in normal conditions (along motorways, airports, close to residential areas).Hamon has an unrivaled reference list in this field.Plume abatement can be offered with mechanical draft cooling tower (cells) as well as with fan assisted natural draft (circular hybrid).ADVANTAGES: no plume visibility. outstanding performance of an evaporative cooling tower. cost attractiveness. all types of heat exchange media. for cell CT :same flexibility as an induced draft cooling tower. all types of structure (wood – frp – concrete – steel)

The induced draft cooling tower generally offers the most effective and economical solution to most of cooling needs. Hamon has supplied numerous IDCT worldwide for all power and industry applications and all environmental conditions. The IDCT offers the following advantages:flexibility. cost effectiveness. air flow almost constant regardless ambient air temperature. adapted to any water flow .flexible operation by shutting some cells. adapted to high thermal performance .all types of structure – wood, FRP, concrete, steel. all types of heat exchange surfaces from splash grids to high performance film

The fan assisted natural draft cooling tower (FAND) combines the advantages of the natural draft cooling tower and the mechanical draft cooling tower.It becomes the best available technology when :Locations with limited plot plan. Overall height is limited. Important heat load . ADVANTAGES VS. CELLS: Compact arrangement. Power saving due to natural draft. No recirculation. Always a good alignment considering wind directions. Cooling by natural draft in case of electricity shortage.ADVANTAGES VS. NATURAL DRAFT CT: Reduced height. Better cooling characteristics during the summer season. Higher flexibility

The natural draft cooling tower is the right choice for large power plants.It offers the following advantages :power saving (no power consumption to induce air flow- no fan).environmentally friendly.no mechanical noise (no fan).safety of operation.no recirculation as the plume is rejected at high level.limited plot area.limited maintenance.high longevity (generally more than plant life expectancy).Payback period between 8 and 16 years depending on several factors.Hamon offers both basin or water collecting devices. This last solution, developed by Hamon, is recommended for large cooling towers.It offers the following advantages :less pressure drop in the air inlet.reduction of pumping power.decrease of acoustic pressure in air inlet