Wash baskets - Import export

The parts to be washed are placed on stainless steel rotative basket and are washed with water mixted with degreaser under high pressure. Washing is done in order to clean oil, sawdust, dirt and wastes on dirty surfaces from different angles by means of time-adjusted pressurized water nozzles according to the part structure and pollution rate. By filtering the water with the recirculation system, the machine is designed to wash parts with minimum consumption of water, detergent, electricity and time.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

WIWOX® CORUS HD ultrasonic systems have been specially designed for cleaning high-quality moulds and precision tools. In maintenance these replace the labour-intensive and often ineffective manual cleaning. The ultrasonic cleaning process can be used for all metal moulds, in particular tools for injection moulding, extrusion, rubber processing as well as aluminium and gravity die casting. A typical structure consists of three stages: 1. cleaning, 2. rinsing and 3. passivating. The usable dimensions are matched to common mould sizes. The workpieces to be washed are placed in the tank either with the aid of a washing basket or with a lifting beam. Our ErgoStation is recommended for manual rinsing, drying and post-treatment. The working area is completely enclosed, brightly illuminated and ventilated. Operation is safe and simple, as the moulded parts are loaded laterally through a sliding door and held by a lifting device during treatment.

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

This small sized computer controlled deflashing machine can be integrated into the production line easily. This saves temporary storage or extra transports and finally corresponding time loss and costs. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. Alternatively the E30 is available with quick-exchange basket system. This basket is compatible to our high-pressure washing machine W30 and furthermore optimally suited for a linear in-line-processing →production →deflashing →washing →termpering, as this charge-baskets may be used compatible for each machine. For industry 4.0 demands, the E30 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible.

The multiprocess parts washing machine with rotating basket is a cleaning device for industrial use.This machine has been designed to ensure that parts are washed effectively and quickly. The main feature of the machine is the rotating basket system.The pieces are placed in a specially designed basket and the basket is washed by rotating it on a rotating mechanism. In this way, each surface of the parts is cleaned equally and a more effective washing process is performed. The Multiproces feature allows different cleaning stages to be performed on the same machine.For example,you can perform different operations such as detergent, spraying, brushing and rinsing on a single machine. Multiprocess parts washing machine with rotating basket is ideal for cleaning parts used in automotive, machinery, electronic equipment and similar industries. It optimizes the production process and increases quality by providing fast, effective and reliable cleaning.

Heavy-duty wash pump - superior integral peristaltic detergent and rinse aid dosing units - EasyClean dual filters - removable anti-block wash and rinse arms - hydro-dynamic basket slides - moulded wash tank to prevent debris build-up and assist maintenance - optional thermostop for guaranteed rinse temperatures - extra loading height - counter-balanced door - self-draining wash pump for improved hygiene - low-volume wash tank - double-skinned and insulated - stainless-steel cabinet and door - insulated boiler - low water usage - simple, intuitive controls

DOLFİN-KBN1 series parts washing machines are used before and after overhaul in repair and maintenance services, especially for washing large and heavy parts. Apart from revision workshops, it is also used for cleaning the surfaces before assembly or packaging in enterprises and factories that produce parts in series. They are special devices designed for large sized and heavy parts such as engines and parts of construction machines, power plant turbines. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned.

DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.

Dolfin RTS series Rotational basket washing machines, washing small and complex surfaces It is a compact parts washing machine used for precise and high-level cleaning of problematic part types. The parts that are placed in the washing basket one by one by positioning and / or in bulk are first sprayed with alkaline chemical washing liquid at high pressure to every point of the parts in the device. Then the washing cell is filled with this liquid and the parts are contacted with ultrasonic sound waves. Therefore, thin section detail points, internal holes and channels are cleaned at a high level. In the process, the basket is rotated on the vertical axis and both spraying and ultrasonic effect is penetrated to every point of the part. At the end of this process, the washing liquid is directed to its own tank, while the same process is applied for rinsing and/or liquids in the other tank.

"DOLFİN- LYM2 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in accordance with the temperature and time values set during use.

DOLFİN- LYM1 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in line with the temperature and time values set during use.

GENERAL FEATURES · Stainless steel construction 18/10 AISI 304 · High-quality stainless steel heaters · At the same time not activated heating system provides energy-saving · Door with double skin · Cycle starts after door closed · Automatic tank loading · Heating control with safety switches · Magnetic door switch · User-friendly simple command interface · Height adjustable feet · Drain, detergent and rinse aid pump can be connected to chassis

GENERAL FEATURES · Stainless steel construction 18/10 AISI 304 · High-quality stainless steel heaters · Rotating washing arms · Four (4) types washing program · Cycle starts after door closed · Automatic tank loading · Heating control with safety switches · User-friendly simple command interface · Height adjustable feet · Drain, detergent and rinse aid pump can be connected to chassis

The extensive power spectrum of this solid production series in combination with the standard equipment coordinated optimally sets new standards in cleaning technology. The solid interpretation of the machine components connected with the modern design of the easy-care machine case completes the innovative machine concept. By the choice of specific accessory articles many possible applications open up. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Modern design Powerful washing pump High permissible basket load Low water pressure switch as dry-run protection Tank cover in the return flow, filterbasket incl. Programmable operation operating counter incl. Housing insulation Loading carriage incl. Grate bearing Digital temperature indication Electronic basket drive (PF 100; PF 150) Square blast pipe system (PF 200) Rotation blast pipe system (PF 300) Adjustable feed

The approved and economic system of this multi-tank-machine offers various possibilities for all applications in the area of the production and manufacturing industry. Most different process steps like cleaning, rinsing, inter-rinsing and drying makes the machine the all-round talent. The PERKUTE system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Adjustable feed fork-lift facility incl. 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter basket incl. Long wash liquid service life due to the skimmer (washing tank) Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump in the washing- and rinsing tank High permissible basket load 2" socket slide valve for the tank emptying Safety limit switch at cover Separate washing- and rinsing tank

This ergonomic advanced development of the proven SP series distinguishes itself through a user-friendly charging system in the form of a movable loading trolley. For large batches, it can also alternatively be equipped with a loading ramp or lateral movement station.In this manner, loading and unloading processes, even of heavy or voluminous components, can be carried out in an optimized manner. The PERKUTE-System: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Mobile, can be used anywhere 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, Long wash liquid service life due to the skimmer Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump High permissible basket load Safety limit switch at cover 2" socket slide valve for the tank emptying Load...

A compact and sturdy construction characterizes the SP machine which is an closed fully automatic machine. The SP meets the highest requirements where total cleanliness and dryness are concerned. We adjust our production to individual demands and are therefore able to offer tailor-made solutions. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Mobile, can be used anywhere 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter baskets incl. Long wash liquid service life due to the skimmer Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump High permissible basket load Safety limit switch at cover 2" socket slide valve for the tank emptying

A professional component spray washing unit with rotating basket or ramps and easy-to-open lid. Washing of parts effectively removes oil and grease contaminants, sand, dirt, dust. The unique Geyser Spray solution spraying system delivers a solution under pressure to the surfaces of items to be cleaned. The set of multidirectional nozzles allows the jets to penetrate into the most difficult-to-reach parts of the item. This guarantees high-quality cleaning. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with and alkaline cleaning solution heated to a predetermined temperature.

PLUSHINE SERIES STAINLESS HOSPITAL EQUIPMENT & SYSTEM ACCESSORIES System Accessories for optimizing details A CSSD or TSSU can never be effective without having supporting tools with decent quality. TBT offer PLUSHINE series stainless equipments and system accessories in order to offer you a complete solution combined with the other solution provided. Made of AISI 304 stainless steel stainless equipments are welded with highest quality finishing for combining durability with aesthetics. Proper materials like aluminium or high grade plastics are used to increase the life time of every product. PLUSHINE series is designed to manufacture happiness for you. •Instrument tables •Surgical scrub sinks •Trolleys •Workstations •Instrument cleaning sinks •Cleaning sinks with ultrasonic cleaner •Containers •Baskets •Manual trolley washing stations

AREAS OF USE - Automotive industry - Aircraft industry - Ship industry - Defense industry - Metal industry PRINCIPLE OF OPERATION The parts to be washed on the basket placed on a stainless rotary platform with a sliding system are subjected to rotary basket washing with water with high pressure detergent in a closed cabin to be placed. Washing process is carried out to clean oil, sawdust, dirt and waste from dirty surfaces from different angles by means of time-adjustable pressure water nozzles according to the part structure and pollution rate. By filtering the water with the cycle permanent system, it is designed to reduce the consumption of water, detergent, electricity and time (labor) with the least consumption of parts. OPTIONAL FEATURES - Steam Evacuation Unit - Stainless chrome body structure - Basket structure - Number of nozzles - Liquid level control system All kinds of parts washing machines can be manufactured in our company upon request.