Vertical lift - Import export

Universal portable manual lift suitable for all vertical lifting for safe work thanks to its special anti-twist mast and its offset winch with automatic brake.

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

* Adopts fully automatic PLC computer control system, which has faster operation speed, lower failure rate, and can be upgraded remotely. * Adopts thickened hot dipped galvanized steel material, sturdy and durable. * 5 brushes (1 vertical lift top brush + 2 small vertical brushes + 2 large vertical brushes). * Strong water cleaning system and foam pump system. * Multiple functions: water washing-----foam-----brushing-----wax water washing. * With fault identification code, the fault is easy to identify and eliminate.

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.

The lifting slings correspond to DIN EN 14921. The are made of highstrength polyester straps. The sling surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the sling. The safety label with the CE mark and technical data is firmly sewn to the sling. The colour of the sling corresponds to the colour code scheme for load capacities of textile type slings. The lifting slings have high UV resistance and low moisture absorption. Safety factor 71 Example WLL 1000kg = break load 7000kg. These lifting slings carry the CE mark according to the European machinery directive. The stated WLL applies to a vertical lift. By a basket lift the WLL is doubled.

The reinforced pallet trucks of the Ferplast FPGS 30 series, with a capacity of 3000 Kg. Are extremely robust and suitable for heavy applications in the industrial and logistic sectors. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip Available in the following models: Pallet truck with forks mm. 800x400 Pallet truck with forks mm. 800x525 Pallet truck with forks mm. 1150x525 - the most requested Pallet truck with forks mm. 1500x525 Pallet truck with forks mm. 1800x525 Pallet truck with forks mm. 2000x525

STAINLESS STEEL MANUAL PALLET TRUCK MOD. FPGS25-I - CAPACITY 2500 Kg. The FPGS25-I hand pallet truck is built with an electropolished AISI 304 stainless steel structure and is therefore suitable for use in the food, pharmaceutical or chemical industry or in humid or saline environments. The internal pump is made of brass with excellent resistance to humidity and oxidation. It is a robust and versatile model that is suitable for handling pallets and pallets even with heavy weight. This model is characterized by: - Structure in AISI 304 stainless steel sheet - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings.

GALVANIZED MANUAL PALLET TRUCK MOD. FPGS25-G - CAPACITY 2500 Kg. The FGS25-G hand pallet truck is built with a galvanized structure and is therefore suitable for use in the pharmaceutical or chemical industry or in humid or saline environments such as fish markets and fishmongers. The internal pump is made of brass with excellent resistance to humidity and oxidation. This model is characterized by: - Structure in galvanized steel sheet -- Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm. mounted on ball bearings. - Double nylon loading roller diameter mm.

PALLET TRUCK FOR FRUITS AND VEGETABLES PROFESSIONAL SERIES FP PRO-ORTO The pallet trucks for fruit and vegetables Ferplast FP PRO-ORTO series are specially designed for those who work in the fruit and vegetable sector and need to move containers and pallets or crates with greater width. They are also characterized by: - Structure in deep-drawn sheet steel with rounded fork tips. (galvanized steel sheet structure for the FPGS HY 25/122 ORTO model) - Hydraulic unit built in cast iron (resistant and reliable), mounted on a high precision thrust bearing. (steel hydraulic unit for the FPGS HY 25/122 ORTO model) - 3-position control lever with adjustable descent speed. - Lifting with rudder drive and automatic recall in vertical position. - Safety valves for lifting and overload limit switches. - Directional wheels diameter 200 mm, in Nylon with polyurethane band (fully nylon wheels for the FPGS HY 25/122 ORTO model).

FPGS PRO MANUAL PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. They are also characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip The FPGS PRO 2500 models are equipped with a double loading roller but on request they can also be equipped with a single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings.

MANUAL PALLET TRUCK LOAD 2200 Kg - forks mm. 1150x525 and mm. 800x525 (short) The hand pallet trucks of the Ferplast FPGS ECO 2200 series, with a load of 2200 kg, are robust and designed for use in industrial environments. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Immediate descent release valve - Directional wheels diameter 200 mm, in rubber. - Ergonomic tiller with 2 curves The FPGS ECO 2200 model with fork length mm. 1150 can be equipped with a single loading roller (model FPGS ECO 22/1150-1) or double loading roller (models FPGS ECO 22/1150-2). The loading rollers are made of polyurethane with a diameter of mm. 82 and ball bearings.

OVIBRA Vibration Spiral Lifters are used for vertical transport (lifting) of loose and piece materials. Spiral Lifter cope even with highly abrasive and/or hot materials. In addition, due to the relatively long residence time of the material on the Lifter trough, the material can be subjected to various physical or chemical processes (cooling, drying, heating). The operation of the Lifter combines failure-free, quiet and smooth transport of materials with the ability to adjust the efficiency. This type of machine can be used both in technological transport and during the storage process. Designed for additional physical and chemical processes.

Drived by integrated pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Compact and robust manipulator With a compact and very robust design, they are suitable for shortstroke movement where rigidity is necessary. They are often used in vertical or lifting modules in the design of pneumatic handling assemblies. For longer strokes, use the Type 37 manipulators. Several mounting directions possible Equipped with the same end plates and without exceeding of the cylinder at the end of the stroke, these compact manipulators can be fixed by the 2 end plates to have the movable central body, but they can also be fixed by the body, the rod cylinder can then be oriented up or down. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time

The DistriCap, an automatic module for dispensing twist-off caps (other formats subject to testing before project validation), is a creation of CDA. Engineered for automatic dispensing and placement of lids onto containers, the DistriCap seamlessly performs these operations "on the fly." This module seamlessly integrates with various machines, either after a CDA filler (such as K-Net Auto or K-Line S) or before an independent screwing machine (like VSA or VS1000). As a result, the DistriCap facilitates the dispensing of a cap or lid before being screwed and/or capped by a screwing module. Depending on the cap type, the machine can have two configurations: Lift/sorter/cap dispenser, typically used for twist-off formats. The lift, a vertical conveyor, sorts capsules by gravity onto a drop-off ramp. Vibrating bowl, commonly employed for plastic lids. The bowl directs caps directly to the appropriate side of the ramp.

KLT containers with a smooth sub-floor and waterdrainage holes in the can ideally be used for areas where liquids shall be drained off. Stable impact surfaces on the front and the sides allow the use in mini-load system; lifting slots the vertical retrieval and special holes the fixing of lid sealings. Perfectly usable for manual handling due to their ergonomic grips at the front walls and their practical support grips on the side walls.

Introducing the KEDY K3600 Vertical Roll Lifter & Tilter, a revolutionary material handling equipment that makes it easy to handle rolls of paper, fabric, and other materials. With a maximum capacity of 250kg, the K3600 is perfect for small to medium-sized rolls, and is specially designed to handle inner core diameters of 3 to 6 inches. The K3600 features spring-force expanded core gripper plates that ensure a secure grip on the roll, making it easy to lift and tilt the roll from a horizontal to a vertical position. Tilting mechanism are designed to provide smooth and precise movement, making it easy for operators to handle the rolls with ease and it is totally fail safe. With the K3600 Vertical Roll Lifter & Tilter, you can easily handle rolls of paper, fabric, and other materials in a safe and efficient manner. With its high capacity and compatibility with a wide range of roll sizes, it is an excellent choice for any manufacturing or production process that requires handling of rolls

Glass Frame Transporters from 8.0 to 33.0 t HUBTEX Glass Frame Transporters are applied in the float glass industry for the transport of A- and L-stillages up to 33.0 tonnes. They are available as electrically, diesel or gas powered trucks and can be equipped with Vulkollan (PU) tires for indoor use and/or with solid rubber tires for the combined indoor and outdoor application. Glass stillages are picked up from floor level by synchronous vertical lifting of the chassis with carrying rails. The special vertical lifting movement guarantees a safe and precise lifting of glass stillages without displacement. Four hydraulic clamps hold the glass sheets in place during transport. Innovation and quality is our key to success. Since the company foundation HUBTEX has set standards with a number of developments and product improvements. The feedback of our worldwide customers is incorporated into the development and the design of new vehicles so that different market requirements can be met in the best possible manner. Model GTR 330 E/D/G, load bearing capacity 33.000 kg, electric, diesel or gas powered, equipped with Vulkollan or rubber tires, with driver's stand or closed sit down cabin for indoor and/or outdoor application

HYDRAULIC PROPULSION COIL TURNOVER ATTACHMENT Capacity up to 0-100 tons capacity Hydraulic control 90 degrees rotating 180 degrees two stage rotating Special support bearing Optional moving board (hydraulic) Sound and light warning device Safety switches Long lifespan C certificate This attachment rotates and lifts vertical or horizontal blocks and coil 90 or 180 degrees. Propulsion system is completely hydraulic and it can be operated with remote control or with control panel. With the help of the limit switches stops safely. MECHANICAL COIL TURNOVER ATTACHMENT 90 degrees rotating Hydraulic propulsion not needed Easy and safe lifting Forklift montage cover included Vertical to horizontal, horizontal to vertical rotating CRANE COMPATIBLE COIL TURNOVER ATTACHMENT 90 degrees rotating No need for hydraulic propulsion Easy and safe lifting Forklift montage cover includedAs Per International Standard

It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester and polyethylene against the harmful effects of pesticides. The water filter can be cleaned easily.Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate.It can be easily connected to the tractor with a three-point suspension system. There is an embossed and transparent level indicator on the tank. The spraying arms of the machine can move within a range of 75 cm in vertical position with the lift system on it. It is also a very effective machine in the fight against sunn pest.

PRO2DS Model PRO2DS is designed for the simultaneous skiing of up to 2 people. Overall dimensions of the model are: Recommended number of skiers with the skis with length of 170 cm: 1 max speed and 2 average speed Overall length: 7684 ... 8124 mm Overall width: 5570 mm Maximum speed of the moving band basic: 60 km/h Inclination angle: V: +8° +23°, H: +/-10° Our company constantly develops and extends the line of the ski simulators PROLESKI. In such a way, new series of endless slopes Direction+Sport have all modifications of the Direction series. First of all, this includes the dynamic change of the inclination angles of the moving band in horizontal and vertical directions, driven by lifting mechanisms and electric cylinders. Compared to other models, PRO2DS has a dynamical speeding-up and the speed acceleration up to 60 km/h.

-rubber guard to prevent damage to drum (can be replaced) -locking lever to secure in open position -operating lever to adjust tilting position

ADVANTAGES: -fast transformation of an open summer playground into a warm winter one; -more efficient ventilation of the room while maintaining heat inside; -use of the system for effective protection against wind; - the zone of parking of shutters in the lower position forms a fence for zoning and safety; - parking of shutters in the top position frees up space for free movement; -possibility to use a choice of single tempered glass or energy-saving glass; - vertical movement of shutters by means of the electric drive; -control of systems by means of the panel, both all simultaneously, and separately.

The DAMBACH Vertical Conveyor lifts efficiency to the next level. The free-standing steel construction utilizes warehouse space optimally. The consistent use of poka-yoke techniques and modularcube design allows both fast installation as well as subsequent positioning in confined conditions. Almost any flow of materials can be taken care of with diverse load-handling devices and conveyor elements – two pallets lengthwise or crosswise, a corner transfer module with or without a change of orientation of the conveyed item, and much more. The DAMBACH Vertical Conveyor is one of the highest performing on the market. Each jack can be delivered with preinstallation and decentralized controls. Deepfreeze compatibility up to -28°C comes included at DAMBACH. Compact construction, small lower approach dimensions Inherently stable multiple-column design for heavy loads: up to 3,000 kg Lift speeds up to 240 m/min, lift heights up to 35 m

USED FOR HANDLING OF coils / rod and rebar in coils. Specially designed for eye vertical coil lifting / copper coil as an option / hot material handling up to 650°C as an option

Overcome heights, safely and precisely. With its precise and efficient lifting unit, the Vertical Transporting Unit performs a real show of strength – with ease! The belt conveyor element incorporated into the baggage lifter is raised and lowered precisely using a lifting unit with two steelreinforced tooth belts. This maintenancefree lifting system has been tried and tested for decades. Between the two upper and lower end positions, any intermediate destinations can be reached. It is also possible to use the Vertical Sorting Unit in flight baggage systems with a container system. An appropriate Motion06 or FMH conveyor can be incorporated to work with the lifter. VTU – 420/660 Low Starting Height Low overall starting height possible. Any Height Requirements Ultrasimple adjustment for the required input and output positions. No Maintenance Maintenancefree lifting system thanks to lifetime lubricated bearings and optional toothbelt drive.

The MULTIFLEX from DAMBACH sets new standards for throughput, flexibility and efficiency. It comprises three perfectly coordinated modules with seamless interfaces: the proven COMPACT SHUTTLE, the high-performance vertical conveyor LIFT and the newly developed CARRIER. In analogy to the small-part-shuttle technology, the MULTIFLEX enables multi-deep storage and highly dynamic commissioning of various types of pallets. In addition, the compact design of the DAMBACH-shuttles and vertical conveyors ensure a very high storage density. With this modular structure, the MULTIFLEX is flexibly adaptable to different challenges. The fields of application for this pallet-shuttle-system are as variable as its three configurations. It is suitable, for instance for cold storage, buffer storage, dispatch warehouses, sequence storage, commissioning warehouses or supply warehouses – But also for compact warehouses with low throughput.

Highlights- All-round protection of functional components of the chain: attachments enclose the chain on three sides, even in the vicinity of the chain wheels • Gentle handling of delicate goods • Close-fitting covers prevent the risk of injuries and malfunctions • Outside of the chain is absolutely clean, so no accumulation of dust • Low level of friction in the event of intentional or accidental stoppage of goods conveyed • Drive chain remains clean, even under adverse operating conditions • Suitable for horizontal and vertical running • No lifting of the load in the vicinity of the chain wheels • Various drive chains available e.g. nickel-plated, maintenance-free or corrosion-proof • Different initial lubricant possibilities, depending on individual application