Vertical drilling - Import export

SPIROL's Model DP self-contained vertical drilling and pinning machine is ideally suited for moderate to high production applications that require accurate drilling and pinning of assemblies. The concept of drilling and pinning with one system eliminates tight tolerance and precision drilling of individual components to ensure proper alignment of holes for assembly. The Model DP Drilling and Pinning Machine consists of an automatic high-precision drilling unit, a SPIROL Model CR Heavy Duty Pin Insertion Machine and a precision air-powered linear slide unit to move the assembly between the drill unit and installation station. The Model DP Drilling and Pinning Machine can drill holes ranging in diameter from 0.8mm-6mm (.031”-.250”) and is capable of insertion forces up to 8 kN (1,800 lbs).

Radial Damping, Heavy Duty Version Energy capacity 405 Nm/cycle Stroke max. 14 mm Impact and collision protection: The TR-HD profile dampers are stressed in the same way as the basic model TR but offer a higher force and energy absorption with a shorter damping distance thanks to the solid design. Different damping characteristic curves can be achieved with two different co-polyester elastomer hardness levels. The slightly oval (bi-concave) shape also ensures a softer force intake. This series absorbs a lot of energy despite the low height: a range of 405 Nm to 11,840 Nm is progressively covered by strokes of 12 mm to 44 mm. With two screws, included in the delivery, the damper can be easily and quickly fixed both horizontally or vertically. The drill hole distance is adapted if required.

This multisided applicable precision rotary table is available in installation size of 300 mm of rotary plate diameter. The rotation plate is stored by a tempered roller-bearing. This enabled high moment rigidity within the radial and axial range as well as free positioning at less friction moments. The drive takes place alternatively via stepper- or AC servomotors by a hardened and polished precision worm with a worm wheel of bronze. The rotary table is horizontal and vertically applicable by standard drilling plan and bolting face.

1. PA2CNC – Automatic CNC spoke polishing machine equipped with 9 tools for complete cleaning of the welded corner, capable of working profiles of any shape (linear, internal, external radius, etc.), with a maximum height of 200 mm and minimum 35mm . The integrated tools are: a) four reversible blades for cleaning the flat part with one side dedicated to the trenching finish and the other to the smooth pass; b) radial blade to clean the rounded part; c) an upper and a lower vertical milling/drilling unit for different types of processing, such as joint channeling or particular finishes depending on the shape of the profile; d) Ø250 blade with movement in two axes; e) hook for cleaning the anchoring area of ​​the glass ball. 2. Programming is carried out in self-learning and the resulting program is transformed into ISO language (upon request, the machine can be equipped with an ISO interpreter).

1. PA2CNC EASY II CNC automatic cleaning machine equipped with 7 tools for complete cleaning of the welded corner capable of working profiles of any shape (linear, internal radius, external, etc.), with a maximum height of 185 mm and a minimum of 35mm. The integrated tools are: a) two reversible blades for cleaning the flat part with one side dedicated to finishing with trenches and the other to rinsing; b) radial blade to clean the rounded part; c) an upper and a lower vertical milling/drilling unit for different types of processing such as joint channeling or particular finishes depending on the shape of the profile; d) Ø250 blade with movement in two axes; e) hook for cleaning the anchoring area of ​​the glass ball. 2. Automatic dimensional self-recognition of the profile to be machined and positioning with automatic centering of the square to be cleaned.

1 Atlas Copco drilling rig, model B53L, tracked. 4-cylinder turbo diesel engine with 100 hp power (BF4L913) Stroke for 3 m rods Maximum pull 9000 kg Atlas copco rotation head, model S1000; max torque 1015 kgm. 8 mechanical speeds. maximum speed up to 800 rpm (@ 2300 rpm diesel engine) Double vice with max passage 230 mm Hydraulic winch Overhauled and repainted For water research, geognostic surveys and vertical drilling in general. Immediately available Price upon request.

N ° 1 Ellettari brand drilling rig, model Ek 200B Year of construction: 2010 CE certified Deutz diesel engine, model F5L 914, power 95 hp Stroke for rods 1.5 / 3m long - modular mast Max pull 4400 kg Rotation head with max torque 750 kgm; 5 speeds. Maximum speed 490 rpm Floating shaft with internal passage 40 mm Double vice with max passage 50-260 mm counter-slide to adjust the vertical position of the tower: stroke 400 mm approximately Hydraulic winch with max pull 1000 kg @ 1st layer Foam pump / polling pump: triplex 80 lt / 1 ', pressure 40 bar track control panel with remote cable Positioning control panel on the machine Control panel for drilling on articulated arm Overhauled and repainted Weight class: 5 tons Excellent movements Compact and powerful For micorpoles - anchors - geognostic probes and vertical drilling Conditions like new Viewable at our office Price upon request

Fully synthetic special oil for cutting, milling and drilling of all metals. It does not drip, due to its excellent adhesion and can be applied even in vertical drilling positions and at high cutting speeds.

DENVER ADVANCE PLUS – Year 2019 Vertical CNC Work Centre Edging, Drilling, Milling Min. Dimensions 550 x 170 mm Max Dimensions 3500 x 1500 mm Max Weight Sheet 150 Kg Thickness 4-21 mm Power 15 kW Spindle Working Hours 4837

The VTC series of vertical turning machines offer maximum stability for vertical turning, milling, drilling, and grinding. The basis of the VTC series is a sophisticated technology with a cast iron design paired with modern linear guiding systems. All machines are hallmarked by optimum damping, maximum productivity through high cutting capacity, and an ideal machine concept for machining highly complex and precision workpieces. The machine design guarantees optimum interaction between operator and machine. Areas of application: Mechanical engineering, gear manufacturing, new energy sectors, and high-precision subcontracting. Table diameters: 1,800 – 7,000 mm Turning diameter: 2,100 – 8,000 mm

Can be fitted in a few minutes to Vignole or overhead crane rail of any dimensions without drilling the rail. Vertically adjustable to optimise the position of the buffer (see dimension E to F). Buffered stop, without impact. Fitted in a few minutes on all types of rail without drilling. ACCESSORIES 1-2 Tightening clips 3 Longitudinal square bracket 4 Thickness wedges awaiting use 5 Thickness wedges in place 6 Tightening bolts Bolts tightened to 28 daN/m In operation At the track end, the buffer must be positioned 1 m from a fixed stop (rail joint or stop fitting on overhead crane rail). The weight is for 2 buffers working in the same plane to stop a crane with a total moving load.

The machine is designed for: drilling, reaming, countersinking, deployment and threading. Vertical drilling machine with a table that moves along a round column and turns on it. The machine can process small parts on the table, larger ones on the Foundation plate. Manual and mechanical feeding of the spindle. Tincture for the depth of processing with automatic shut-off of the feed. Cutting threads with a manual or automatic reversal of the spindle a predetermined depth. Processing small parts on the table. Control of the spindle movement along the ruler. Built-in cooling.