Results for
FLÄKTCOMP SWEDEN AB
Sweden
A mixed-flow fan combines the advantages of axial fans with the characteristics of radial fans. Simply described, it is an axial fan with a fan wheel in radial format. This provides a cost-effective design, in duct or box design, with a stable fan curve and relatively high pressure. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit. Mixed-flow fans are usually used as ventilation fans. Typical applications are ventilation solutions in gyms, sports halls, warehouses, commercial kitchens, factories or airport terminals. Depending on requirements, the design of a mixed-flow fan can be completely adapted to the customer’s needs. With the right dimensioning and material selection, a mixed-flow fan will work problem-free for many years.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
The wall fans we offer are direct-driven axial fans that are easily installed in walls or ceilings. The wall fans can be in 1-phase or 3-phase design. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials The fans are usually supplied as a complete unit, but we can also offer new impellers for existing wall fans.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
In tough applications such as e.g. high temperatures or movement of corrosive gases, it is not always possible to mount a motor in the volume flow. The solution for this is the so-called bifurcated fan which is an axial fan where the air flow is divided in a tunnel, which means that the motor is not in the volume stream. It is thereby protected from possible harmful particles or high temperatures. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Radial fans or centrifugal fans are a type of fan that uses centrifugal force to create a pressure increase and a volume flow. This type consists of a fan wheel that rotates in a snail-shaped cover. The flow enters the fan through an inlet placed axially with the fan wheel shaft and motor, and is then thrown out radially with the help of the force from the fan wheel. Unlike axial fans, the motor is not in the volume flow of radial fans. To change the performance and characteristics of centrifugal fans, different designs are used on the fan wheel. The strength of the centrifugal fan is its versatility. A radial fan can be designed to transport a variety of volume flows at a wide range of pressures. At higher flows and relatively low pressures, an axial fan may be a better option. Centrifugal fans are available in single and double suction versions.
Request for a quoteINDUPLAST PLÁSTICOS DE INGENIERÍA
Spain
Machined parts or 3D additive manufacturing. Adaptable to production lines in the perfumery and cosmetics sector, packaging lines, dispensers and filling. We have a variety of materials and colors, we work with antistatic materials suitable for the sector, we have extensive experience in packaging, as well as special parts for your bottling machinery, maintenance solutions, stands for trade shows, spare parts, etc.
Request for a quoteNORDICO-AVAC.CO COOLING TOWERS & HVAC EQUIPMENTS
Portugal
tubolars ,roof top & wall types
Request for a quoteLMT SRL LUX
Italy
LUX ROOF AXIAL FAN is designed to extract large volumes of air in roof installations, without long ducts. For instance: ventilation of industrial buildings (factories, warehouses etc.), stock farms
Request for a quoteLMT SRL LUX
Italy
DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.
Request for a quoteERF GROUP
Turkey
Air Handling Unit Production with 800 - 100,000 m3/h flow rate. 20 different models and a wide selection. Ability to be disassembled thanks to the modular system Easy pointing and mounting Tolerant values and maximum efficiency in the selection of fon, heater, cooler, filters, dompers, electric motor, heat recovery device and muffler.
Request for a quoteERF GROUP
Turkey
USAGE AREAS -It is used in the heating industry for burning solid and liquid fuels in boilers and providing secondary air in a controlled manner. -In the ventilation of closed environments -In industrial machinery belonging to the jewelery sector -in the textile industry -In mines and mushroom farms -In plastic injection machines -In the combustion air supply of gas, diesel burners -In humid and humid environments -In the greenhouse industry -In chicken coops -Used in many areas of the manufacturing industry
Request for a quoteUVENTS VENTILATION SYSTEMS
Turkey
Collecting dust Fume/gas elimination Handling fine grained material (marble dust, granule, plastique etc.) At printing houses, different factories such as textile,
Request for a quoteUVENTS VENTILATION SYSTEMS
Turkey
*Made Of Galvanized Metal Plate *Wihtout Motor *Air System Easily With The Help Of Rectangular Fans *Designed For The Needs Of Middle Upper Aspiration Capacity *With The Help Of The Maintenance Covers, Engine And Fan Can Be Fixed Without Removing The Equipment.
Request for a quoteUVENTS VENTILATION SYSTEMS
Turkey
Since the impellers are made of aluminium as areas of usage gas plants and acidic places preferred. Aspiration of smoke, iron foundry, cement plants, and paper mills Aspiration of moist and dusty air Industrial buildings, animal farms, greenhouses, garages, sport centers, and parks etc.
Request for a quoteINTAX TRADING SRL
Romania
CONNECT TC100S Mix Flow Inline Blower CONNECT series is a mixed flow inline exhaust fan in various sizes. Specially designed for installing ventilation systems with high pressure, strong airflow and low noise levels. Energy Saving motor with ball bearing for log time operation. Removable body for easy cleaning, without the need to move the ducts. Mix Flow Inline Blower CONNECT are powerful enough to ventilate multiple areas with a single unit for one or more rooms of varying sizes Quality motor: Ball bearing motor Auto cut-off fuse built in motor Silicon steel lamination Pure copper winding ProtectionIPX4 Input/ Output Ducted Diameter (mm)97 (for 100 mm ducting tubing) Electrical ClassificationClass 1 Indoor/ Outdoor SuitabilityFor Indor Use Only Climatic ClassificationTropical Condition Gross Size (mm)300x180x236 Net Size (mm)297x177x234 Gross Weight (kg)1.99 Net Weight (kg)1.78 Speed selector included✓ Speeds2
Request for a quotePOLMAK MAKINA LTD. CO. - POLFAN
Turkey
- Low Pressure Radial Fan - Directly Coupled Motor. - Backward-Curved (BC) Blade Fans. - Revolvable Fan Case. - On Demand, Special Stainless Steel Manufacturing Is Available - Air Flowrate : 3.500 - 54.500 m³/h (Min. - Max.) - Pressure (Pt) : 40 - 265 mmss (Min. - Max.)
Request for a quoteERF GROUP
Turkey
The propellers of AKAP sleeve fans, which can meet high air flow rates and high pressure losses, are made of aluminum raw material and they provide the chance to change the flow and pressure by adjusting the blade angles. They can be produced with a motor that can withstand temperatures of 200, 300, 400 °C for 120 minutes upon request.
Request for a quoteERF GROUP
Turkey
USAGE AREAS * In marble machines * In the supply of combustion air for gas, diesel burners * In the transfer of residues such as dust, clippings, etc. * In the storage of granules and particles * In blow-drying machines * In textile machines-placket spreading machines * At exhaust metering stations * In extruder machines * Can be used safely in industry for wide purpose
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Ventilators for the cosmetics industry - Import exportNumber of results
17 ProductsCompany type