Valves for pressurised equipment - Import export

The sliding gate motor valve type 8038 in reinforced design with highresolution fast actuatoris suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be handled precisely. The interaction of highprecision control electronics with the precise stepper motor results in a positioning accuracy of ± 0.2% even with a valve stroke of only 6 mm. By means of supercapacitor technology, in the event of a power supply failure, the valve returns to its defined basic position. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature

The sliding gate motor valve type 8037 is suitable for the intended use in potentially explosive atmospheres according to Directive 94/9EG. Media such as steam, liquids, gases etc. can excellently be controlled with this motor valve, even in hazardous areas. Metal bellows Position electronics Analog stroke feedback Limit switch . . .Ex zones 1, 2, 21 and 22 Protection class I 2G Ex de (ia) IIC T6/T5 or T4 (gas version) Protection class II 2D Ex tD (iaD) A21 IP 66 T80C (dust version)

The pneumatic sliding gate control valve type 8028 in reinforced GS3 design with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve is characterised by high control precision and a long service life. Digital positioner type 8049 Positioner type 8049 in explosionproof version Positioner with integrated process controller type 8049 IPC Metal bellows Limit switch Position feedback Pilot valve . . .

The hightemperature sliding gate control valve type 8024 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

Compact threeway motor valve made from stainless steel for on / off and control with neutral and aggressive media, on request with failsafe option. Whitworth pipe thread NPT thread Positioner electronics, limit switch, position feedback All control actuators are also available with fail safe feature. Different control functions such as distributing and mixing function Degreased version, Silicon or PTFEfree version …

Pneumatically operated globe valve type 7027 with integrated positioner for control applications with neutral to highly aggressive media. The straight design enables a highly efficient and very simple insulation of the valve body as well as the welded-on pipeline.

SMLD 300G, THE FLEXIBLE ONE With a minimum grid width of 6 mm, the SMLD 300G is very space-saving, while offering maximum flexibility. These micro valves are suitable for a wide range of viscosities and are available in many configurations. Valve holder with integrated heating can also be combined with it. The internal volume is 65 µl. The R (Resistant) type offers crucial benefits in regards of corrosion and the handling of aggressive medias, compared to SMLD 300G, but remains fully compatible in size and function for all SMLD products and components. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible.

The pneumatic flanged sliding gate control valve type 8621 in GS3 design with integrated positioner designed according to ASME B16.34, API RP 553, API 598, ASME B31.1 and ASME B31.3 incl. flange connection according to ASME B16.5 is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be handled perfectly.

The hygienic angle seat control valve type 7025 with integrated digital positioner is specially adapted for use in the food and beverages production. Suitable for controlling product streams, drinking water, CO2, nitrogen as well as sterile steam and sterile air. All wetted plastics are FDA-compliant and conform to EC Regulation 1935/2004 and the EU Plastics Regulation 10/2011. The hygienic angle seat valve is also certified to Technical Instructions on Air Quality Control (TA-Luft) in accordance to ISO 15848-1 and on request can be supplied with an acceptance test certificate in accordance with EN10204 3.1.

SMLD 300, THE SMALLEST With a minimum grid width of just 4.5 mm (with a special coil package even only 4 mm), the micro valves SMLD 300 are suitable for the tightest of spaces. Low-viscosity media can be dispensed with small flow rates. This type of valve offers a small internal volume of only 25 µl. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible. The micro valve can be exchanged quickly and without dismantling the entire valve holder and without disconnecting the electric connections.

Brass Valve,Gas Valve,Oven Valve,Oven Part,Stove Part,Gas Spare Part

TILTING CHECK VALVE

- Whitworth pipe thread - Thread G2 for manual override - Chambered O-ring - Sealing: NBR - Material: brass nickel plated, Al black anodized - Allowable medium: air - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 14,5 to 145 psi (1 to 10 bar) - Nominal flow rate measured when throttle is open at 87 psi (6 bar) and 14,5 psi (1 bar) pressure drop between inlet and exhaust

Our Products are ; Female x Female Mini Ball Valve (Economic Serie, Brass) Male x Female Mini Ball Valve (Economic Serie, Brass) Mini Ball Valves (Brass) Ball Valves (Brass) (Male - Female) Mini Ball Valve (Brass) (Female - Female) Mini Ball Valve (Brass)

Stainless steel ball valve used for application with liquid Nitrogen (−196°C), liquefied natural gas LNG (−162°C) and other liquefied gases at very low temperatures. Valves are degreased, cleaned and packaged prior to shipping. • DN 10 – DN 100 • PN 16 – PN 100 • NPS ½″ – NPS 4″ • Class 150 – Class 600

PN10/PN16 GATE VALVE / Elastomer & Metal Seated ** Body- Cover : GGG-40.3 Ductile Iron (EN GJS 400-15) Disc : Ductile Iron + Rubber Coated Handwheel : GG-25 Cast Iron (EN GJL 250) Gasket : EPDM / NBR Connection : Flanged Max. Working Temp. : 70 ºC Max. Working Pressure : 10-16 Bar *** Applications Area : Hot and Cold Water Systems / Non-acidic and non-flammable liquid fluids

Sliding flaps (valves) used for dry product silos and passages are produced manually or automatically (hydraulic / pneumatic).

Double Plate Check Valve / Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron (EN GJS 400-15) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : Hot and Cold Water Systems / Irrigation and Water Supply Lines / Purification System and Waste Water Discharge / Fire Protection Lines / Oil- Cooling Cycles

Unidirectional valve used for temperatures from −60°C to +550°C, pressures up to PN 400 and designed to prevent from reverse flow of the service fluid. • DN 50 – DN 400 • PN 16 – PN 400

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#acv

Our Brass valves from ACL are employed in a large variety of industrial sectors: water treatment, electrical appliances, industrial process, heating and air-conditioning, medical equipment, automotive, textile, food, pneumatic and many more.....

Our Stainless Steel valves from ACL are employed in a large variety of industrial sectors: water treatment, electrical appliances, industrial process, heating and air-conditioning, medical equipment, automotive, textile, food, pneumatic and many more.....

The gas pressure regulator of the RTBK type is designed for automatic regulation of gas pressure “after itself” at the facilities of high pressure gas pipelines, such as gas distribution stations, gas treatment and dehydration plants, gas fields, compressor stations, etc. The operating medium is natural gas and other gases that are not aggressive to regulator materials. Inlet working pressure: from 12 to 100 bar Output working pressure: from 1 to 12 bar Depending on the order, the modular regulator of the RTBK type can include the following elements: General-purpose body based on which the modular type regulator is built. Active module. Monitor module. Built-in shut-off valve. Shut-off valve as a separate element connected in series with the regulator body. Noise reduction module. And other technical combinations of modules and components. More information on our website.

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#direct-acting

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#strainers

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#ball-valves

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#marine

Design: API6D / BS1868 Pressure Rating: 150/300/600/900/1500/2500# Face to face length: ASME B16.10 Valve end connections: Flanged RF or RTJ to ASME B16.5 Welded BW to ASME B16.25 Marking: MSS SP-25 Inspections & Tests: API598 Primer painted for protection during storage and transport (carbon steel body/bonnet) Product may be compliant with Pressure Equipment Directive PED, up to category III for European territory

These valves have closure system in screen form by means of slide and connected to pipe lines and used for stopping fluid inside pipe. Screwed shaft which is mounted inside housing moves slide up and down and performs open and close operation for valve. Sealing is maintained by gasket which is coated over slide. They are used liquids which do not have abrasive property and in liquid fuel installations. They are not used for controlling and flow adjustment.