Vacuum lifting beams - Import export

The CLAD-LIFT 1000 is designed to handle glass, windows, panels, doors or other elements up to 1000 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180 ° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 1000 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. Raise the bar for heavy loads The CLAD-LIFT 1000 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum...

The CLAD-LIFT 785 is designed to handle glass, windows, panels, doors or other elements up to 785 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180 ° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 785 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. CLAD-LIFT for heavy loads The CLAD-LIFT 785 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum load is...

The CLAD-LIFT 600 is designed to handle glass, windows, panels, doors or other elements up to 600 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The front driven CLAD-LIFT 600 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. Flexible like the 350 - more powerful drive The CLAD-LIFT 600 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum load is...

This CLAD-LIFT with a load bearing capacity of 575 kg can be used for big multi-glazed windows. It`s very easy to mount these heavy windows. The CLAD-LIFT 575 is designed to handle glass, windows, panels, doors or other elements up to 575 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 575 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. More potentials: lifting up to 575 kg The CLAD-LIFT 575 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes . The vacuum...

The CLAD-LIFT 350TH is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The Clad-Lift 350TH ( „TH“ for „telehandlers“ ) is a special version that can be attached to telehandlers or forklifts. The window mounting device for telescope crane and forklift Examples of use: Technical Data Article No. 1020170 Max. Extension Lifting Beam ( horizontal ): 790 mm Outer length: 1.850 mm Max. Height to the center of the lifting yoke 2.700 mm Outer width: 840 mm Max. Height to center of lifting yoke: 100 mm Max. Lifting capacity: approx 350 kg Tower fine adjustment ( hydraulic ): 500 mm Max. Load at maximum extension: 200 kg Batteries: 2 x 95 Ah Max. Last bei seitlichem Transport 200 kg Rotation 360° Weight: 423 kg Suction plates: 6 x Ø 270 mm Minimum Extension: 290 mm

TRBA’s Energy and Underground Installations division is a great asset to the company and it is perfectly integrated into our current structure. After all, the job of a contractor is very similar to that of a pipeline installer. The difference lies in way the staff is trained to use the different authorised energy types, as well as the presence of qualified, in-house expert staff to install the connections and supply lines for each energy type.

The KEDY K10300 Rotating Spreader Beam is the ultimate lifting solution for any heavy-duty project. With a maximum capacity of 100 tons, this spreader beam is built to handle even the heaviest of loads with ease. The ability to rotate the spreader beam around a vertical axis gives you maximum versatility, allowing you to move the load in different directions and orientations. The K10300 is equipped with multiple rigging points, allowing you to attach slings or other rigging equipment at different points on the beam. This ensures that your load is properly balanced and supported, providing maximum safety for you and your team. Safety is our top priority, the K10300 is designed with safety mechanisms that prevent the load from rotating in an uncontrolled way, ensuring the safety of the operator and the people around. Choose the KEDY K10300 Rotating Spreader Beam for your next project, and experience the ultimate in lifting power and versatility!

Introducing the KEDY K1000 Spreader Beam– the ultimate heavy-duty lifting solution for your industrial needs. With a maximum capacity of 100 tons, this product is designed to handle even the heaviest loads with ease. The K1000 is constructed from high-strength steel, ensuring durability and reliability in even the toughest working environments. The innovative design of the K1000 allows for easy and precise load control, making it perfect for use in field. The K1000 also features an adjustable width, allowing it to accommodate a wide range of loads. The traverse feature of the K1000 provides unparalleled stability, ensuring that the load remains balanced and secure during the lift. At KEDY, we understand the importance of safety in industrial operations. That's why we've designed the K1000 to meet and exceed industry standards, ensuring that your lift is always safe and secure. Invest in the KEDY K1000 Spreader Beam for your next heavy-duty lift NOW!

The K2950 Automatic Beam Tong from KEDY is the ultimate tool for lifting and moving heavy beams and other objects with ease and precision. Its innovative locking mechanism eliminates the need for operator intervention, ensuring a safe and efficient lifting operation. The tongs lift loads evenly, ensuring the safety of your materials. The polyamide pads protect your materials from damage while lifting. The handles provide a convenient way for operators to guide the tongs, making it easy to maneuver and position the load. Additionally, the K2950 Automatic Beam Tong is built to last, constructed with durable materials and designed to withstand the rigors of heavy-duty use. Whether you're working in construction, industrial, or manufacturing settings, this tong is the perfect solution for all your heavy-lifting needs. With its advanced features and ease of use, the K2950 Automatic Beam Tong from KEDY is the best choice for professionals who demand the highest quality and performance.