Untreated - Import export

Shape: round Material: 1.4841 (X15CrNiSi25-21) Type of production: hot-rolled Surface: untreated Standard: EN 10095 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 60 - 75 Length (mm): 5,000

Shape: round Material: 1.4541 (X6CrNiTi18-10) Type of production: hot-rolled Surface: untreated Standard: EN 10088 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 30 - 120 Length (mm): 5,000

Shape: round Material: 1.4301 (X5CrNi18-10) Type of production: hot-rolled Surface: untreated Standard: EN 10088 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 25 - 400 Length (mm): 5,000

Oil-based care products are particularly suitable for treating natural, untreated products. Special teak wood, furniture care or flooring oils prevent the respective woods from drying out and protect against weather influences and UV rays. Teak oils: Back to the natural colouring of the wood Teak is extremely sensitive to light. After a few months the natural colouring of the wood begins to fade due to the effects of light, moisture and oxygen. Special oils help to eliminate greying and regain the natural colouring. Furniture care oils: resistance for wood Furniture care oils make woods more resistant, diffusible and antistatic. Furthermore, these oils can deepen and revitalise the natural structure and colouring of the wood. Floor oils: protection and care of wooden floors Floor oils particularly make softwood floors and cork less sensitive to dirt, abrasion and water. The colour of the wood can also be enhanced by using these oils.

Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 50 - 80°C ✔ For untreated PP (polypropylene) plastics and PET Our PPT-I hot melt dispersions is tailored for heat transfer printing. The formulation is tailored for untreated PP plastics. It also provides a low activation temperatur and a good hot-tack. Due to this it is easy to achieve great bonds on this difficult material, even at higher speeds. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional and industrial products made of PP. It shows good resistance against water, alcohols and cremes. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

Shampoo, Loofah, Soap, Shower Gel, Shower Powder, Perfumes, Beauty Oils

Shape: flat Material: 1.4301 (X5CrNi18-10) Type of production: hot-rolled Surface: untreated Standard: EN 10088 eClass 9.1: 35010311 UNSPSC 11.2: 30102405 Dimensions: Thickness (mm): 4 - 60 Length (mm): 5,000 Width (mm): 15 - 150

Shape: flat Material: 1.4571 (X6CrNiMoTi17-12-2) Type of production: cut Surface: untreated Standard: EN 10088 eClass 9.1: 35010311 UNSPSC 11.2: 30102405 Dimensions: Thickness (mm): 3 - 15 Length (mm): 4,000 Width (mm): 15 - 150

Shape: flat Material: 1.4301 (X5CrNi18-10) Type of production: cut Surface: untreated Standard: EN 10088 eClass 9.1: 35010311 UNSPSC 11.2: 30102405 Dimensions: Thickness (mm): 3 - 15 Length (mm): 4,000 - 6,000 Width (mm): 10 - 200

Shape: flat Material: 1.4404 (X2CrNiMo17-12-2) Type of production: cut Surface: untreated Standard: EN 10088 eClass 9.1: 35010311 UNSPSC 11.2: 30102405 Dimensions: Thickness (mm): 3 - 8 Length (mm): 4,000 Width (mm): 20 - 50

Shape: flat Material: 1.4404 (X2CrNiMo17-12-2) Type of production: hot-rolled Surface: untreated Standard: EN 10088 eClass 9.1: 35010311 UNSPSC 11.2: 30102405 Dimensions: Thickness (mm): 6 - 25 Length (mm): 5,000 Width (mm): 20 - 100

Shape: flat Material: 1.4571 (X6CrNiMoTi17-12-2) Type of production: hot-rolled Surface: untreated Standard: EN 10088 eClass 9.1: 35010311 UNSPSC 11.2: 30102405 Dimensions: Thickness (mm): 5 - 50 Length (mm): 5,000 Width (mm): 20 - 150

Shape: round Material: 1.4571 (X6CrNiMoTi17-12-2) Type of production: hot-rolled Surface: untreated Standard: EN 10095 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 25 - 400 Length (mm): 5,000

Shape: round Material: 1.4305 (X8CrNiS18-9) Type of production: hot-rolled Surface: untreated eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 35 - 280 Length (mm): 5,000

Shape: round Material: C45 (1.0503) Type of production: cold drawn, peeled Surface finish: ground Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h6 eClass 9.1: 35010302 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 20 - 80 Length (mm): 6,000

Shape: round Material: 1.0122/1.0038 (S235JRC/S235JR) Method of production: cold drawn, peeled Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010302 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 4 - 120 Length (mm): 3,000 - 6,000

Shape: round Material: C45 (1.0503) Method of production: cold drawn, peeled Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010302 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 12 - 130 Length (mm): 3,000 - 6,000

Shape: square Material: C45 (1.0503) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010303 UNSPSC 11.2: 30102404 Dimensions: Length (mm): 3,000 Edge length (mm): 20 - 50

Shape: square Material: S235JR (1.0122) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010303 UNSPSC 11.2: 30102404 Dimensions: Length (mm): 3,000 - 6,000 Edge length (mm): 8 - 120

Shape: flat Material: S355J2C (1.0579) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010301 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 10 - 50 Length (mm): 6,000 Width (mm): 40 - 120

Form: round Material: 11SMn30 (1.0715) Manufacturing method: cold drawn, peeled Condition: untreated Surface quality: mill-finish Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010302 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 6 - 150 Length (mm): 3,000

Shape: hexagon Material: C45 (1.0503) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010304 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 17 - 50 Length (mm): 3,000

Shape: hexagon Material: 11SMn30 (1.0715) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010304 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 13 - 50 Length (mm): 3,000

Shape: round Material: S355J2C/S355J2 (1.0579/1.0577) Method of production: cold drawn, peeled Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010302 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 6 - 160 Length (mm): 3,000 - 6,000

Shape: hexagon Material: 11SMnPb30 (1.0718) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010304 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 13 - 55 Length (mm): 3,000

Shape: round Material: 16MnCrS5 (1.7139) Type of production: peeled Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 15 - 45 Length (mm): 3,000

Shape: round Material: 16MnCrS5 (1.7139) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 12 - 70 Length (mm): 6,000

Shape: flat Material: C45 (1.0503) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010301 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 10 - 40 Length (mm): 3,000 Width (mm): 40 - 100

Shape: round Material: 11SMn30Pb (1.0718) Method of production: cold drawn, peeled Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010302 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 8 - 105 Length (mm): 3,000