Universal fastening - Import export

The socket strips are available in various country-specific varitants with different functional elements. Special attention has been devoted to practical, universal fastening: Variable attachment facilities have been created with an angle bracket which may be inserted in four positions. Hence, for example, the 482 mm long socket strip may optionally be mounted on 482.6 mm (19") mounting angles, the 482.6 mm (19") mounting frame, on the enclosure frame, or in the rear section of the wall-mounted distributor. Without additional mounting accessories, the socket strip may be inserted into all sections with a 25 mm hole pattern. This makes selection much easier, as well as providing additional flexibility and saving on warehousing. Provision has also been made for cable routing of the infeed, and when mounting in the 482.6 mm (19") section there is adequate space to route the infeed between the socket strip and the profile rail without kinks.

Universal fastening element. The hammer-headed screw is twisted into the profile slot and so can mounted into an existing systems at a later date. The serrations break through the anodised film and creates a secure, electrical conductive connection.

Swing clamps are used where low clamping forces suffice or where the clamping point must be free when mounting and removing the workpiece. The block form of the housing offers universal fastening possibilities. The magnetic piston is primed for electrical end position feedback. Including screw and lock washer for fastening the clamping arms (accessories). The swing action of the clamp should not be blocked. F1 = at 6 bar (max. operating pressure).

The pneumatic swing clamp is suitable for clamping workpieces from above. The swivel and clamping function occurs pneumatically. The swivel function enables unobstructed insertion and removal of the workpiece. Optimum accessibility to the workpiece is guaranteed. The foot of the housing offers universal fastening possibilities, enabling the swing clamp to be optimally aligned with the workpiece being clamped. The swing clamps are available in left or right swivelling versions. Pneumatic swing clamps can also be placed in multiple positions on the workpiece and operated in a particular order. They can be controlled manually or automatically.

The pneumatic hold-down clamp is suitable for clamping workpieces from above. This clamp is operated with standard pressure compressed air. The large swivel angle of the clamping arm makes it easy to insert and remove the workpieces without any obstructions, guaranteeing optimum accessibility to the workpiece. The block design of the housing offers universal fastening possibilities, which means that the clamp can be optimally adapted to the workpiece being clamped. Self-aligning pads with a smooth or serrated faces can be fitted in the clamping arm, enabling rough or machined workpieces to be clamped. These pneumatic clamps can be placed in multiple positions on the workpiece and operated in any particular order. They can be controlled manually or automatically. As these clamps are pneumatically actuated, they relieve the operator, particularly where frequent clamping processes are carried out.

Baby Buggy/ Pram Gloves with Popper Fastening and Fur Lining Material: 100% Polyester Universal Fit Popper Fastening Fur Lining Elasticated Wristband Colours: Black and Grey

Park rubbish bin, metal, galvanized with bottom discharge "R2D2". 50 / 70 liters. Stylish, modern. Own development of the Rud Exhaust System company. Features: powder polyethylene thermoplastic paint is used. After coloring, the paint remains plastic, does not crumble, does not reflect. Suitable for repair. Anti-graffiti. Warranty for paintwork is 5 years; anti-vandal performance; anti-terrorist enforcement according to EU standards; lower garbage disposal (no need for p/e bags) - European trend; the ashtray is separated from the main garbage. During the unloading of garbage, the ashtray is unloaded at the same time. Possible installation: thanks to the universal fastening system, it is possible to attach to any poles, traffic lights, fences, racks, etc. Material - hot-dip galvanized steel 1.2 mm, 2 mm RAL colors upon agreement with the customer.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

The kit is for self-assembly of an electric bicycle (electrifying your bicycle). Universal fasteners and a wide line of complete sets allow to modify almost any bicycle and make it electric. The electric bike will allow you to ride a longer distance and spend less effort on the trip. The battery is removable, so it's easy to take it to charge and leave the bike outside. We manufacture the batteries ourselves, using our own patented technology. We've developed a unique battery mounting system. The electrical system has many functions to adapt to your riding style and your tasks. We give a 2-year warranty on the kit. When you buy it, you get instructions for self-installation on your bike, as well as advice on how to prepare your bike. We use quality components. We also offer ready-made electric bikes and services for developing new kits. The kit contains electric motor, controller, wires, hand gas, monitor, battery, charger. The minimum cost of kitting is specified.