Results for
AMETEK SPECIALTY METAL PRODUCTS
United States
Ti 6Al/4V (Titanium Grade 5) is the most widely used of all the alpha-beta titanium alloys accounting for more than 50% of total titanium usuage. It is typically used in the annealed condition, at service temperatures through 400°C (750°F). Ti 6Al/4V is welded with matching or with ELI filler wire. Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability. In consequence, its uses are numerous such as for military aircraft or turbines. It is also used in surgical implants. Generally, it is used in applications up to 400°C to improve ductility and toughness in cold-worked condition. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Ti 3AI/2.5V (Titanium Grade 9) alloy is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility. Furthermore, it is weldable as the commercially pure grades and has excellent resistance to torsion and corrosion.Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Commercially Pure (CP) titanium is an unalloyed titanium grade with a close-packed hexagonal (CPH) crystal structure at room temperature known as alpha phase structure. It has good formability, weldability, ductility, and corrosion resistance combined with moderate strength. Grade 2 titanium has slightly increased higher mechanical properties when compared to Grade 1. It is used principally in aerospace, automotive, chemical plants, marine environments, architecture structures & medical applications. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Because of its strength, unique density and corrosion resistance, titanium has found applications in many industries. For high quality tubing products, it’s often a better substance to use than competing materials like stainless steels or super alloys. Titanium tubes are light weight and exceptionally corrosion and heat resistantThe density of titanium is about 60 per cent of that of steel- or nickel-based alloys giving significant weight savings in aerospace structures. The tensile strength is better than that of austenitic or ferritic stainless steels. Titanium is exceptionally corrosion resistant and exceeds the resistance of stainless steels in most environments. The metal is non-magnetic too, and has good heat transfer properties, with a melting point higher than steel alloys. Titanium is easily worked. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
S20910 stainless steel provides a combination of good corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by types 316 and 316L, plus approximately twice the yield strength at room temperature in the annealed condition. In addition S20910 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures a well as outstanding cryogenic properties. And, unlike many austenitic stainless steels, 22-13-5 stainless steel can be heavily cold worked to enhance its yield strength and remain non-magnetic. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Grade 316 is the standard molybdenum-bearing grade, second in overall volume production to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Grade 316L, the low carbon version of 316 and has very high immunity from sensitization (grain boundary carbide precipitation). It is extensively used in the oil and gas and chemical industries for its cost effective corrosion resistance and ease of fabrication. There is commonly no appreciable price difference between 316 and 316L stainless steel. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Superior Tube supplies a whole range of products to the oil and gas sector, and it’s one of our most important markets. You’ll find our high performance tubes successfully used in some of the most aggressive subsea and downhole conditions thanks to our proven track record in meeting the strict quality requirements of the oil, gas and geothermal energy industries. Improving technology has extended the range of ways in which oil and gas fields can be exploited, and increasingly projects require the use of long, continuous lengths of stainless steel control lines. These are employed in a variety of applications including hydraulic controls, instrumentation, chemical injection, umbilicals and flowline control. Fine Tubes supplies products for all of these applications, and more, lowering operating costs and improved recovery methods for our customers. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
At Superior Tube we're proud of the way our precision tubes are used to help save lives. Welded and seamless tubes we've manufactured are used for specialized products across the medical device industry. For instance, transcatheter aortic valve replacement (TAVR) is a promising new treatment for patients with severe aortic stenosis - a narrowing of the heart valve - who are not ideal candidates for traditional open-heart surgery. Because the replacement valve can be implanted using techniques that are far less intrusive than open-heart surgery, patients with TAVR usually experience a much more rapid recovery than they normally would. On the other hand, more traditional valve replacement surgery might employ our pericardial stented tissue heart valves. These implants help blood flow naturally and offer excellent hemodynamic performance. They are designed for optimal performance and long-term durability. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Superior Tube Co. supplies above industry standard quality high performance used in the manufacturing of liquid and gas chromatography. High Performance Liquid Chromatography High performance liquid chromatography (HPLC) is used to analyze chemicals in both research and industrial processing. It’s an application that requires precision tubing, which is resistant to high temperatures, pressures and corrosion. For many years, Superior Tube has supplied tubes made from corrosion resistant austenitic, stainless steel and nickel alloys for a range of HPLC equipment. The tubing is used for the manufacturing of the columns in chromatography machines. This application requires exceptional inside diameter condition and overall tube strength to withstand the pressure involved when pumping liquids or gases through the column in order to extract samples for chemical analysis. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Since the earliest days of the nuclear power, Superior Tube has been manufacturing high quality metal seal tubing and O-ring seals for use in reactors. For the safe running of nuclear generators, compliance with order specifications and the integrity of the metal parts are of critical importance. They have to last from the day the reactor is commissioned until the end of its life cycle, surviving extremes of heat and nuclear radiation. Today, O-ring and seal tubing components from Superior Tube are deployed in reactor cores across the world. Because of our track record delivering the highest quality O-rings and seal tubes, we have also been able to work with the nuclear industry to develop new solutions and help advance the technology. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Superior Tube has a long history of supplying high quality metal tubing to the nuclear power industry going right back to its inception after World War II. It’s an area where strict compliance and integrity are absolutely critical. We have a track record of developing new solutions and helping the nuclear energy sector to advance. Our tubes are deployed in the cores of nuclear reactors, where they must endure in an extremely demanding environment for the entire life cycle of each reactor. Control rod and cladding tubing are critical safety components, as they are responsible for controlling the nuclear reaction and energy output within the core. Superior currently produces control rod tubing from 1.0” in outside diameter down to around .250” OD. If you have demand of products within or outside of this range, please contact us so we can provide a solution. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Major players in both the aerospace and nuclear power industries rely on Superior Tube for precision tubing to protect their control systems and instrumentation. Meanwhile, control and measuring devices critical to the safe functioning of nuclear reactors also require our high quality tubes. Within reactor cores, our instrumentation and control tubing encases equipment for monitoring various factors such as pressure, temperature, density differences and fuel burn up rates. It’s an extremely demanding environment where durability and reliability are absolutely critical. Superior Tube supplies instrumentation tubing in straight and coiled tube forms. The most common materials used are special grades of stainless steel and nickel alloys. Superior currently produces instrumentation tubing from up to 1.5” in outside diameter down to less than .020” OD. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Major engineering companies who design and manufacture aerospace engines rely on the strength and durability of tubing products made at the Superior Tube mill. This is due to our reputation for producing high quality, high strength, yet lightweight tubing. You’ll find our tubes at work within a variety of systems in aircraft including fuel delivery, fire suppression, drain lines and bleed air systems. Bleed air is high temperature, high pressure air taken from the jet engine and fed into various areas of the plane to be used for things like de-icing and cabin pressurization. We use high performance materials such as Alloy 321 stainless steel and Inconel 625 and 718 for applications that deal with extreme temperatures. Precision tubing for aerospace engines can be ordered in sizes from 0.250” outside diameter right up to 1.5”. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Fine Tubes has a long and proud heritage of manufacturing tubes that operate in hostile environments - where performance is everything and maintenance is impossible. High-Quality Tubes For The Solar Orbiter Our precision seamless titanium tubes were selected to operate in the Chemical Propulsion System for the Solar Orbiter mission. The highly engineered tubes exceeded the demands for quality and cleanliness specified for this mission-critical application. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
We deliver precision tubes specially engineered for aerospace engines that perform in the most extreme pressures and temperatures. Trusted by Major Engine OEMs Our aerospace engine tubes are trusted by major OEMs to operate in a variety of critical aircraft engine systems including fuel delivery, fire suppression, thrust reverser, drain lines, and bleed air systems. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Fine Tubes manufactures a range of specialist stainless steel tubes used to produce high-performance and ultra high-performance liquid chromatography (HPLC and UPLC) columns. Our tubes are components in both liquid and gas chromatography columns which are used for analytical and preparative processes across the fields of biochemistry and analytical chemistry. Tightest Tolerance Control The control process during manufacture of these tubes is critical to meet the highest specifications demanded in this area. The percentage Cross Section Area Reduction (% CSAR) through pilgering and drawing is specific to each product’s dimensions and specifications. Surface Finish The ID surface finish is further refined by passivation, polishing or electro polishing processes. OD surfaces are finished down to 0.1μm (0.25μ") and ID down to 0.16μm (0.40μ") and 0.08μm (0.20μ") with electro polishing. Please note that we have a minimum order value of £10,000.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AMETEK SPECIALTY METAL PRODUCTS
United States
Fine Tubes manufactures a full range of thin wall tubing products for the fabrication of condenser tubes. Our condenser tubes are engineered specifically for the heating, cooling or reheating of fluids and gases in a range of sectors. Alloys Our tube mill has the flexibility to produce condenser tubes in seamless, welded and welded redrawn formats in the following grades of metal: Stainless steel (304L, 316L) Austenitic stainless steels (904L) Titanium alloy (Ti CP Grade 2) Nickel alloys (C276, C22, 600) Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Fine Tubes manufacturers medium and high-pressure tubing for a range of critical applications in several industries. Our products are crucial in oil and gas extraction projects, as well as in commercial and military aerospace programmes. Operating conditions can require our products to be rated up to 60,000psi operating pressure and with tensile strengths greater than 220ksi (1,515MPa). Oil and Gas Applications Our medium and high-pressure tubing is used in the most hostile downhole conditions including deepwater and sour oil well projects. Applications include precision instrumentation, chemical injection, and monitoring applications for downhole tools. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Fine Tubes is a leading supplier of high-quality cooling and heat exchanger tubing across a range of industries. Nuclear Cooling Tubes Our high-quality seamless cooling tubes are trusted by the world’s major nuclear reactor suppliers for range of technologies. Typical alloys include stainless steel alloys 690, 304, and 825. Nuclear island applications include: Passive residual heat removal heat exchangers regenerative Non-regenerative heat exchangers Turbine island nuclear applications include condenser tubes, stator bars for water and hydrogen cooling in generators, and cryogenic heat exchanger tubes. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Oil and gas extraction projects increasingly require the use of long, continuous lengths of corrosion-resistant control lines. You’ll find our high-performance tubes successfully used in the most aggressive subsea and downhole conditions. Our control line tubes enable downhole valves and chemical injection systems to connect with remote and satellite wells, for both fixed and floating central platforms. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Our NORSOK-approved Super Duplex alloy 2507 tubes (UNS 32750) are custom-engineered for the most aggressive subsea and downhole oil and gas applications. Advantages include: NORSOK-approval Made to order in specialist non-standard sizes Superior strength and corrosion resistance Short lead times Small batch sizes With 80 years engineering expertise, we specialise in manufacturing corrosion resistant Super Duplex tubes for the increasing hostile temperature and operating environments. Greater Corrosion Resistance Than Standard Duplex Grades Super Duplex stainless like S32750, is a mixed microstructure of austenite and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades. The main difference is that Super Duplex has a higher molybdenum and chromium content which gives the material greater corrosion resistance than standard duplex grades. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Duplex UNS S31803/1.4462 is a duplex stainless steel with approximately 50% ferrite and 50% austenite. This grade has good mechanical strength at room temperature, resistant to corrosive attack, including pitting and is resistant to stress corrosion cracking. The grade is a successful alternative to the normal 300 series austenitic stainless steels, where its higher strength and resistance to stress corrosion cracking is required in critical applications. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
The microstructures inside duplex stainless steels are approximately 50 per cent austenite and 50 per cent ferrite, and consequently duplex products share the physical properties of both ferritic and austenitic grades. Duplex stainless steels are resistant to the cracking caused by chloride stress corrosion in austenitic grades, and have improved resistance to localised corrosion. This family of stainless steels has roughly twice the yield strength of their counterpart austenitic grades . Higher hardness values provide better wear resistance for high precision tubes. Duplex stainless steel tubes have high hardness and wear resistance propertiesDuplex steels are easily welded and formed, similar to austenitic grades. Depending on chromium, nickel and molybdenum content, duplex stainless steels are divided into four main categories: lean duplex, duplex, super duplex and hyper duplex. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
347 (UNS S34700/1.4550) is a fully austenitic niobium stabilised stainless steel. The addition of Niobium reduces the creation of carbide precipitation in service between 430 to 900 degrees C and during welding processes and increases the mechanical strength of the material. This grade has good resistance to oxidation and corrosion along with good creep strength and can be used at temperatures where carbide precipitation may occur in non-stabilised grades e.g., 304. It is used principally in aerospace exhaust manifolds and engine components, chemical processing equipment running at high temperatures and in nuclear processing piping. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. The addition of copper to this grade gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. However, there is limited use with hydrochloric acids. It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum. The grade is non-magnetic in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Surgical Implant 316L is a double melted stainless steel, regarded as a medical grade, this stainless steel is melted to achieve high levels of purity and cleanliness. It has excellent resistance to both general and intergranular corrosion, and pitting and crevice corrosion. The double melting allows for superior surface finish. Surgical implant 316L Stainless Steel is our most commonly sold medical stainless steel. Beyond removing impurities, this process, in combination with the unique nickel and chromium content of 316, tends to facilitate the formation of the surface chromium oxide layer that makes stainless steel corrosion resistant. There is some belief that surgical implant 316L forms a more substantial surface layer, and that this plays a strong role in protecting the host body from reactions to the nickel content of the material. Please note that we have a minimum order value of £10,000.
Request for a quoteResults for
Tubes and pipes - Import exportNumber of results
39 ProductsCountries
Company type