Results for
AMETEK SPECIALTY METAL PRODUCTS
United States
L-605™ is a nonmagnetic cobalt-based chromium-tungstennickel alloy that has excellent corrosion and oxidation resistance, and high strength at both room and elevated temperatures. Through work hardening, high strength levels can be obtained. L-605™ has a minimal heat treatment response, but can be used in the cold worked and aged condition. Applications include medical implant devices, springs, valves, and engine components for the aerospace industry. As a result of its high tungsten content, L-605TM is radiopaque, which is beneficial for implant medical devices, such as stents. Because of the alloy’s high work hardening rate, only minimal reductions can be taken before solution annealing will be required. L-605TM is very resistant to oxidation and scaling at elevated temperatures, and is nonmagnetic in all conditions. L-605™ is produced by vacuum induction melting followed by electroslag remelting (VIM-ESR), and as such, has a low nonmetallic inclusion level.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
AMETEK Specialty Metal Products has applied the high purity wrought powder compaction process to Ductile Cobalt Alloys in order to produce multiple ductile cobalt strip products generally used by weld wire manufacturers as sheathing for flux cored and metal cored hardfacing materials. These alloys range from 80 to 95% cobalt with Iron or Iron-Nickel additions to improve ductility for drawing operations.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Havar® is a heat treatable Cobalt base alloy that provides very high strength. The alloy has excellent corrosion resistance and is non-magnetic. Applications have included metal diaphragms for aerospace sensors, metal diaphragms for burst discs, power springs, gap spacers in magnetic heads, and target foils in nuclear physics. Forming cold rolled Havar requires large radius (90° Bend – 8 X thickness) prior to age hardening. The joining can be accomplished using both welding and soldering techniques.The ultimate endurance life is achieved by heat treating the alloy at 1000°F after 80% cold work. The alloy will retain 75% of room temperature strength up to 950°F (Figure 1). Available Sizes: Havar® is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.025” (0.0127 mm to 0.635 mm) and widths to 7.5” (190.5 mm). A foil product is available in thicknesses down to 0.000060” and widths of 4.0” (101.6 mm). The material corresponds to UNS R30004.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Rodar® is an Iron-Nickel-Cobalt alloy with an unique linear thermal expansion coefficient. It is also stable to cryogenic temperatures. This combination of characteristics has prompted its application in electrical package sealing of glass/metal and ceramic/metal. Rodar® can be formed and deep drawn from the annealed temper. A 1/8 hard temper is optimum for heavy piercing.The material can be joined to other metals by welding, brazing, and soldering. The joint design must consider that Rodar® has a lower expansion coefficient than most other metals. Available Sizes: Rodar® is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.060” (0.0254 mm to 1.524 mm) and width up to 12.0” (304.8 mm). The material conforms to ASTM F15, AMS 7728 and UNS K94610.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
MP35N®-LTi is a nonmagnetic nickel-cobalt-chromiummolybdenum alloy that has excellent corrosion resistance, can obtain ultrahigh tensile strengths (300 ksi) through work hardening and aging, and has good toughness and ductility. Applications include electrical components, spring contacts, medical instruments, such as stents and implant electronic connectors, chemical, food processing and marine environments. After work hardening, MP35N® alloy can be aged in the temperature range of 800/1200°F for increased strength. MP35N® will only respond to aging if in the work hardened condition. Service temperatures up to 750°F are recommended for work hardened material. MP35N® can be successfully TIG welded. MP35N® is produced by double vacuum melting, and as such, has a low nonmetallic inclusion level. Available Sizes: MP35N®-LTi is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.030” (0.0127 mm to 0.762 mm) and widths
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AMETEK SPECIALTY METAL PRODUCTS
United States
Cobalt-based metals are typically alloyed with chrome, nickel, iron and tungsten. They are used in challenging environments in applications that demand high temperature strength and hardness, excellent wear and corrosion resistance.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
AMETEK Specialty Metal Products is committed to meeting the demands of Metal Additive Manufacturing (AM) for mass-production of industrial components. We engineer economic AM powder of mainstream stainless steel, nickel, and cobalt alloys for non-rotor-grade components made by Laser Powder Bed, Binder Jet, and Cold Spray processes. Alloys As a leader in metal powder production for additive manufacturing, we offer several different alloys and size distributions specifically tailored for different additive manufacturing processes and machines. The most common additive manufacturing powder materials produced include: 316L (including A240 grade) 304L 17-4PH® We also offer specialty austenitic and ferritic stainless steels, as well as a selection of nickel and cobalt alloy powders for 3D printing.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
AMETEK Specialty Metal Products uses a wrought powder metallurgical process to ensure the highest purity finished products. Our main strengths lie in the processing of Nickel, Iron and Cobalt containing alloys amongst other available materials. The processing of these materials begins with the consolidation of powder through a roll compaction process and followed by a controlled atmosphere sintering. Further reduction of the material is performed solely under cold working temperatures to reduce the introduction of non-metallics and annealing is performed under controlled atmospheres. AMETEK Strip Products are produced in ranges between .002” (0.05mm) and .080” (2.03mm) thicknesses in a full range of tempers and widths to 22” (558.8mm) while maintaining special capabilities to produce materials outside of these ranges for special applications. This process lends itself to the production of small but easily reproducible lots of highly specialized alloys
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
MP35N* is an age hardenable nickel-cobalt base alloy that has a unique combination of properties - ultra high strength, toughness, ductility and outstanding corrosion resistance. MP35N resists corrosion in hydrogen sulphide, salt water and other chloride solutions. It also has excellent resistance to crevice and stress corrosion cracking in sea water and other hostile environments. Suitable where a high combination of strength, high modulus values and good corrosion resistance are required. Applications for this alloy also include medical devices and dental products. Please note that we have a minimum order value of £10,000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Our weld wire sheathing material is used in both flux cored wire and metal cored welding wire processes. The wire sheathing is formed into a tubular product by our customers and the center of the tube contains the ‘fill’ (flux, metal powders, etc) to bring the wire to the desired chemistry. The finished wire is used across a wide breadth of industries in processes such as: Submerged Arc Welding (SMAW) Gas Metal Arc Welding (GMAW) Wire Arc Thermal Spray Flux cored welding wire producers use our metal sheathing materials to prepare finished wire for thermal spray and in surfacing applications, in high temperature and corrosive environments. Cobalt Our Ductile Cobalt Alloys are used to produce wire to hardface applications in the construction, mining, and oil and gas industry. Our proprietary process allows us to offer high Cobalt containing products (91% Cobalt or more) while maintaining a highly ductile strip for wire forming.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Hamilton Precision Metals is the world leader of precision-rolled foil and ultra-light gauge strip in any alloy. This includes stainless steel foil, titanium foil, nickel foil, copper based foil, cobalt based foil, Constantan® foil, Evanohm® foil, and many other alloys. Metal foil is generally defined as strip 0.004” (0.1016 mm) and below. Cold rolling strip to these extremely thin gauges demands extensive rolling expertise to manufacture with precision and consistency. Foil in Any Alloy We offer the broadest portfolio of almost every high performance alloy made today. Additional alloys are available upon request, contact us today! Stainless Steels Nickel Based Alloys Copper Based Alloys Cobalt Based Alloys Commercially Pure Titaniums Strain Gage: Constantan®, Evanohm®, Tightest Tolerances and Thinnest Gauges in the Industry We custom roll metal foil in nearly any alloy and specialty metal to the tightest tolerances and thinnest gauges
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Here at Hamilton Precision Metals, we’re passionate about cold rolling metal strip in a diverse range of specialty alloys to meet your exacting specifications. Our extensive precision strip product range include stainless steel strip, nickel strip, titanium strip, copper based strip, cobalt based strip and many more alloys. We have the expertise to roll light gauge strip from 1.5 mm (.060”) down to 0.127 mm (0.005”). Broadest Range of Alloys We offer an extensive portfolio of almost every high performance alloy made today. Additional alloys are available upon request, contact us today! Stainless Steels Nickel Based Alloys Copper Based Alloys Cobalt Based Alloys Commercially Pure Titaniums Strain Gage: Constantan®, Evanohm®,
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
AMETEK offerswater atomized powder versions of the Tribaloy® alloys T-400 and T-800. These alloys are Cobalt-Molybdenum-Chromium-Silicon (Co-Mo-Cr-Si) based materials that are extremely hard due to the formation of high fractions of intermetallic laves phases. They also exhibit very good oxidation and corrosion performance due to their design chemistry. Tribaloy® alloys are used extensively as hard-phase particles in powder metallurgy of automotive valve seats and guides as well as for other components in the drivetrain requiring enhanced wear performance at elevated temperatures. Tribaloy® alloys are also used extensively for coating and cladding applications in a variety of markets ranging from industrial to aerospace. Tribaloy® T-400 is designed for exceptional wear properties in metal-metal contact scenarios at high temperatures. The alloy has high Co and Mo content and high laves phase fraction leading to very high hardness with reasonable
Request for a quoteResults for
Cobalt alloys - Import exportNumber of results
14 ProductsCountries
Company type