Voltage - Import export

Product Features: • The Class B series of over-voltage surge protective devices has been developed to protect against partial direct and indirect lighting discharges and is intended to provide protection in zones 0A - 1, per IEC 62305. • Category IEC / EN / VDE: Class I, II / Type 1, 2 / B + C. This range incorporates remote signaling contacts for central monitoring of SPD health. • DVSB275652TNS for TNS single phase networks with separate N and PE conductors. • DVSB400654TNS (65kA) for TNS three phase networks with separate N and PE conductors. • DVSB4001004TNS (100kA) for TNS three phase networks with separate N and PE conductors. • DVSB4001004TT for TT three phase networks, where N to PE galvanic isolation is required.

Product Features: • The Class C series of over-voltage surge protective devices has been developed to protect against the effects of indirect lightning discharges and induced voltages and is intended to provide protection in zones 1 2 per IEC 62305. • Category IEC / EN / VDE: Class II / Type 2 / C. Available with and without remote signaling contacts. • DVSC27545 consists of a high performance varistor block with thermal disconnection device. The plug-in module/base design facilitates replacement of a failed module in situ without the need to remove system wiring. • DVSC275452TNS Series combines two 45kA varistor modules to provide protection for single phase TNS networks. • DVSC275452TT Series combines a 45kA varistor and gas discharge tube to provide protection for TT single phase networks, where N to PE galvanic isolation is required.

Product Features: • The VSU range of voltage suppression units are available in single, three and three phase + neutral. • All products are RoHS compliant.

Product Features: • The KMFV is a range of 600V, high performance three phase industrial filters and are designed for industrial applications within harsh environments such as the petrochem industry. • The KMFV range of high voltage, three phase industrial mains filters and are designed for use in industries such as mining and renewable energy. • Current ratings 6A to 320A for use on a 600V power supply (Canada). • Current ratings 420A to 820A for use on a 690V power supply. • This range is three phase from 6 Amps to 820 Amps and is economically priced, lightweight, side mounting and has IP rated terminal blocks. • Designed to meet UL 1283 and EN 133200 these filters will enable end users to meet EN 55011A and EN 55022B legislation. • All products are RoHS compliant and approvals held include UL and cUL.

Product Features: • 20 Output voltages to choose from (5 - 120VAC R.M.S.). • Six VA size models available from - .5 to 24 VA. • Vertical mount, split bobbin design. • 1.2, 4.4, 10, 24 VA models are non-concentric wound. • 0.5 and 1 VA are both concentric wound. • Low primary to secondary coupling - no electrostatic shield required. • Choice of economical single primary 115V - 60 Hz. only (161 Series) or the universal dual primary 115/230V - 50/60 Hz. (160 Series). • High insulation - Hipot fo 2,000V RMS. • Class B insulation - 130°C. • CSA certified (File #LF3902) and UL recognized (File #E207860).

Product Features: • Two versions are available: • Primary 115 VAC, 50/60 Hz. or • Primary 117/234 VAC, 50/60 Hz • A 2,000 VAC and above, secondary leads are through rubber bushings. • Units can be run full wave bridge or full wave C.T. • V.A. is a C.C.S. rating. • Current ratings are CCS (Continuous Commercial Service) and ICAS ratings (Intermittent Commercial or Amateur Service). • Enclosed, 4 hole chassis mount. • Minimum 6" long leads. • Class A insulation (105°C). • Hi-Pot test at a minimum of twice secondary voltage. • Conservative designs - CSA certified (209651).

Product Features: • A perfect match to the 1650P Series Potted Output transformers. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Mounting hardware included. • Primary: Universal - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Finish: Black powder paint to match the 1650P Series of potted output transformers. • Units can be run full wave bridge or full wave C.T. • c UL us recognized (E207860).

Product Features: • Primary: Universal - 100, 110, 120, 200, 220, 230, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number 379WX - uses a separate 60VAC 0.2 Amp winding). • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Models: This series is an upgrade from the entire 200 Series range of units PLUS 2 models designed specifically for 300B tubes (Part number 300BX) and 2A3 tubes (Part Number 302AX). • Finish: Black powder paint to match the 1650 Series of output transformers • Units can be run full wave bridge or full wave C.T. • Conservative designs - CSA certified (209651).

Product Features: • Primary 117/234 VAC, 50/60 Hz. • All units have dual secondaries except 266LA25 (C.T. secondary only). • Secondaries can be used as; a center tapped secondary, parallel connectors or used individually (except 266LA25). • Units are designed for use with all windings engaged. • Open style. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • We use Class B insulation (130°C) for extra protection - UL listed as a Class A (105°C) design. • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (209651).

Product Features: • Economical single primary 115 VAC, 60 Hz. (or 117 50/60 Hz.). • Most secondaries are center tapped (C.T.) VAC (RMS). • Open style, channel bracket, two hole chassis mount. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • We use Class B insulation (130°C) for extra protection - UL listed as a Class A (105°C) design. • Hi-Pot test of 2,000V RMS. • UL listed. • CSA certified.

Product Features: • Primary 115 VAC, 60 Hz. • All secondaries center tapped, VAC (RMS). • Enclosed, 4 hole chassis mount. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot of 2,000V RMS. • UL listed (#E50394) and CSA certified (209651).

Product Features: • Dual primary 115/230 VAC. • 50/60 Hz. operation. • Dual secondaries for series or parallel connections. • 4,000 V RMS Hipot test. • Class F insulation (155°C). • Chassis mount (either two or four hole depending on size). • Five VA sizes to choose from. • Dual bobbin construction. • Dual use terminals (solder lug or quick connect). • C UL US recognized (E207860). • TUV Type approved. • CE certified to IEC 950 (Approved to EN 60-742 Safety Isolating Transformers).

Product Features: • Primary 115 VAC 60 Hz. - except as noted. • Enclosed, 4 hole, chassis mount. • Minimum 6" long leads. • Units can be run full wave bridge or full wave C.T. • Class A insulation (105°C). • Hi-Pot test of 2,000V RMS. • Conservative designs - CSA certified (209651). • Note: A production "running change" has been made to the primary winding - effective with August 2009 production.

Product Features: • Low profile mounting, dual - split bobbin design. • Low primary to secondary coupling, balanced windings, no electrostatic shield required and low EMD radiation due to semi-toroidal design. • Universal dual primary 115/230V - 50/60 Hz. • High insulation - Hipot of 1,750V RMS. • Class B insulation - 130°C. • C UL US recognized. UL file #E270860.

Product Features: • Primary 115 VAC, 60 or 400Hz. models, 3 case sizes. • Epoxy cast to withstand shock and severe environments. • Two coil design provides balanced windings and low magnetic radiation - no electrostatic shield required. • 228 Series include four, 6-32 x 0.38 machine screw inserts for less strain on P.C. board connections.

Product Features: • Choice of two primaries: Single primary 115VAC (187 Series) or Dual primary 115/230VAC (186 Series). • Either series operates on 50/60 Hz. • Combination solder or quick connect terminals. • Split bobbin construction eliminates the need for an electrostatic shield. • Hi-pot tested to 2 KV RMS. • Economical open style, channel frame - chassis mount design. • Insulation material - Class B or 130C. • Lower temperature rise designed not to exceed Class A for longer life. • UL listed (#E207860) Type 3AH. • CSA certified.

Product Features: • 20 Output voltages to choose from (5 - 120VAC R.M.S.). • Six VA size models available from - 1.1 to 36VA. • Both series operate on 50/60 Hz. current. • Low profile, split bobbin design. • Dual winding secondaries, non-concentrically wound. • Units are designed so that all windings must be used. • Low primary to secondary coupling - no electrostatic shield required. • Choice of economical single primary 115V (164 Series) or universal dual primary 115/230V (162 Series) - either model 50/60 Hz. operation. • High insulation - Hipot of 2,500V RMS. • Class B insulation - 130°C. • No mounting hardware required on 1.1 and 2.4 VA sizes, two hole mounting on 6, 12 and 20VA sizes, four hole mounting on 36VA size (mounting screws not provided). P.C. board mount with industry standard pin spacing. • c UL us recognized.

Product Features: • 115 VAC - 60 Hz. single primary. • All secondaries are center tapped (C.T.). • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).