Results for
SHAW MOISTURE METERS
United Kingdom
Reliable, accurate and offering superior senstivity, repeatability and speed of response. The SDT-Ex is suitable for continuous measurement of trace moisture in industrial process gases. This 3 wire, 4-20 mA, loop powered dewpoint transmitter utilises the ultra high capacitance SHAW moisture sensing technology and is certified intrinsically safe to ATEX and IECEx standards. Suitable for use in hazardous areas using a signal isolator and ideal for hydrocarbon, petrochemical and hydrogen applications. The SHAW SDT-Ex incorporates the unique AutoCal function designed by SHAW, allowing users to ensure accuracy between laboratory calibrations. Fully self-contained within a robust housing, the stainless steel construction provides weatherproof protection to IP66 (NEMA 4X). The output is configurable in 5 different units and various dewpoint ranges are available covering an overall range from -100 °C to +20 °C (-148 °F to +68 °F) dewpoint with an accuracy of ±2 °C (±3.6 °F) dewpoint.
Request for a quoteSHAW MOISTURE METERS
United Kingdom
Manufactured in the UK, the SDH-PSS is an effective, self-contained sampling system designed for gas or general compressed air sampling, ensuring sample pressure and flow are suitable for trace moisture measurement. Its compact size means it can be taken as close as possible to the sampling point thereby minimising the volume of the sampling arrangement. Simple to setup and install. Fully configurable with options for a filter unit and pressure regulator on a chassis made from high quality stainless steel with stainless steel fittings and pipework. Designed to condition pressurised gas samples up to a maximum of 200 barg (2,900 PSI), Various configurations are available. The hygrometer docks securely in the sample system, which sits in a rugged, anti-static, foam padded carrying case with rubber feet. With no stored energy components, the SDH-PSS is suitable for use in hazardous areas when paired with the SDHmini-Ex, making this an all in one, dewpoint measurement and sampling system.
Request for a quoteSHAW MOISTURE METERS
United Kingdom
Over time, various factors such as exposure to contaminants, age, incorrect operation, sensor deterioration, a drift in electronics or exposure to corrosive gases, can contribute to dewpoint instruments losing accuracy and reliability. To maintain accuracy and reliability, we advise an annual service and calibration. For instruments used in critical applications or aggressive environments, more frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.
Request for a quoteSHAW MOISTURE METERS
United Kingdom
Shaw Moisture Meters supply sample systems to assist with sampling direct from process lines, protecting your hygrometer from high pressures and contaminants particularly in hydrocarbon applications. These engineered solutions extract and analyse a representative sample of the air or gas, which is then either vented off to atmosphere or returned to the process. The SHAW range of sample systems has been developed throughout 60 years of experience in industrial moisture analysis and process applications. Built using the highest quality components to provide long term performance and reliability even in the toughest applications. Choose from an add on sample system suitable for your portable hygrometer, dewpoint meter, online analyser or contact us regarding a complete all-in-one system designed for your specific requirements.
Request for a quoteSHAW MOISTURE METERS
United Kingdom
Utilising the ultra high capacitance SHAW moisture sensing technology. The AcuDew is suitable for continuous measurement of trace moisture in process gases and dry compressed air, offering superior sensitivity, repeatability and speed of response. Various dewpoint ranges are available covering an overall range of -120 °C to +20 °C (-184 °F to +68 °F) dewpoint with an overall system accuracy of ± 2 °C (± 3.4 °F). The output is configurable to display in °C dewpoint, °F dewpoint, ppm(v), ppb(v), g/m3 and lb/MMSCF. Incorporating the unique AutoCal function designed by Shaw Moisture Meters, allowing the user to ensure accuracy between laboratory calibrations by checking the span of the hygrometer and correcting for any deviation. This high performance dewpoint transmitter can cope with extreme environmental conditions, offering protection to IP66 NEMA 4X. Its rugged construction has been tested to withstand 35,000 kilopascal (350 bar) maximum pressure.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SHAW MOISTURE METERS
United Kingdom
Accurate, reliable and easy to use for spot check measurements of trace moisture in gases and compressed air. The SADP portable dewpoint meter utilises the proven SHAW ultra high capacitance aluminium oxide moisture sensor, which is fast responding, reliable and accurate with an overall range of -100 to +20 degrees Celsius dewpoint. Incorporating the unique desiccant dry down head assembly and AutoCal function, means the sensor is kept dry between tests, giving the operator a meaningful reading in 5-10 minutes. The SADP indicates dewpoint temperatures in degrees Celsius (°C) dewpoint, degrees Fahrenheit dewpoint (°F) and parts per million (ppm(v)) on a large, easy to read, analogue display. Certified intrinsically safe to ATEX and IECEx standards traceable to the National Physical Laboratory (NPL), the SADP is suitable for use in hazardous environments and for a wide range of industries including power generation, semi-conductor manufacture and pharmaceuticals.
Request for a quoteSHAW MOISTURE METERS
United Kingdom
A hand held hygrometer suitable for a wide range of industries. Designed for quick, reliable spot check measurements of trace moisture in gases and dry compressed air. Utilising the proven SHAW ultra high capacitance aluminium oxide sensor, desiccant dry down head assembly and AutoCal function. The intuitive menu system allows simple operation of the instrument and can be viewed in 10 different languages, has real time graphing, screen shot features and selectable engineering units. The rechargeable lithium-ion battery provides over 150 hours of continuous operation on a full charge and the instrument is charged via USB or a plug type to suit your geographical location. Incorporating Bluetooth interfaces for connectivity and printing and advanced data logging with download to PC capability, up to 300,000 readings can be captured and displayed via USB. Suitable for use in hazardous environments, the SDHmini-Ex is certified intrinsically safe to ATEX, IECEx and UL standards,
Request for a quoteResults for
Moisturizers - Import exportNumber of results
8 ProductsCompany type