Results for
KGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 66mm (1½U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 45mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 120mm (3U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 95mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 82mm (2U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 55mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 40mm, 80mm and 120mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 63.5mm. • Fixed extrusion height of 30mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 55mm • Maximum component height of 18.6mm • Weight 1.0 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 108mm, 136mm, 168mm and 228mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 44.2mm (1U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 200mm • Maximum component height of 31mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 169.8mm. • Fixed extrusion height of 53.8mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 160mm • Maximum component height of 40.75mm • Weight 3.46 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 108.5mm. • Fixed extrusion height of 30mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 100mm • Maximum component height of 18.6mm • Weight 1.38 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 108.5mm. • Fixed extrusion height of 45mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 100mm • Maximum component height of 33.6mm • Weight 1.63 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed to house electronics for equipment interfacing where shelf or wall mounting is required. • Consists if an aluminium "U" shaped extrusion body and a slide-in flat aluminium bottom plate. • Slide-in plate perfect for easy mounting of components. • Steel foot "L" brackets are attached to each end. "L" brackets are punched with 0.31" (7.9mm) diameter keyholes for easy mounting of enclosure. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Available in either clear or black anodised finish, the bottom slide-in plate is finished to match. • The two end "L" brackets are matched to the enclosure. • Includes all assembly hardware. • Note: Recommended screw torque is 5 lbf/in.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded body includes a slide removable "belly" plate - except in smaller sizes "A" through "D".
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed to house P.C. boards or for equipment interfacing. • Integrated slotted flanges allow for easy wall mounting. • Flange provides a completely flat bottom surface and transitions seamlessly into the extrusion body for a finished look. • Sized for 50mm wide PC boards. • P.C. boards mount into extrusions by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of 0.06" (1.5mm).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed to house P.C. boards or equipment. • Easy wall mounting or shelf mounting with two removable flanges. • Sized for standard Eurocard P.C. boards. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Two piece body - with easily removable belly plate for easy access to top interior of enclosure. • Extruded body and aluminium endplates with a choice of either clear or black anodised finish. • Includes eight (8) assembly screws - either clear or black assembly screws to match enclosure panels and body. Note: Recommended screw torque i 5 lbf.in (56.5 cN.m).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Uses all machine screw and PEM nut construction, perfect for applications where repetitive assembly and disassembly are required. • Light weight design - all aluminium, type 5052 H32 for easy modification. • Strong design construction using: • 0.125" (3.2mm) thick - side panels and rack mount brackets • 0.064" (1.6mm) thick - front and rear panels • 0.062" (1.6mm) thick - top and bottom panels • Can be used with or without rack mounting "ears" or brackets (included). • Enclosure is finished in rugged, satin texture, black powder paint. • Includes top, bottom, side panels, front and rear panels, rubber self adhesive feet, rack mount brackets are all hardware. • Pull handle accessory kit available. • Easy access to inside, only 4 screws need to be removed from any of the 6 panels for internal access. • Internal aluminium chassis panel is optional. • Knockdown design ships unassembled for easy handling and shipping protection.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body, • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • Diecast aluminium end panels are rugged - yet easy to machine. Front and rear gasket is a full perimeter conductive foam/fabric made of a Ni/Cu (nickel/copper) and CPSA (conductive pressure sensitive adhesive). • Designed to meet IP54 ratings. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Extruder - Import exportNumber of results
17 ProductsCompany type
Category