Electricity - Import export

Product Features: • Sizes A to E are 20 gauge 0.036" thick steel. • Sizes F to J are 18 gauge 0.048" thick steel. • Self-tapping screws included. • ASA 61 grey baked powder paint.

Product Features: • Aluminium cases 0.081" (2mm) thick aluminium. • Aluminium top panel sizes to 14" wide are 0.064" thick aluminium. Larger sizes are 0.081" thick. • Sold pre-assembled with a textured blue case and a choice of a contemporary grey (beige) or a black top panel. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Solid oiled walnut sides on a black, ventilated steel base. • Solid wood sides are real walnut - each piece has a unique colour and grain. • Aluminium top panel is powder painted in a satin contemporary grey (beige). • Aluminium top panel sizes are 0.064" thick aluminium. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Convection ventilation is provided by slots in the bottom and removable rear panels. • Aluminium case is finished in satin blue with a contemporary grey panel. • Vented back panel, bottom, and sides are made from 0.081" thick aluminium • Sloped front panel is made from 0.064" aluminium • Supplied with hardware and rubber feet.

Product Features: • 18 gauge steel base for extra strength. • Easy to machine - aluminium top panels are 0.064" thick aluminium. • Sides include vertical rows of ventilation. • Sold pre-assembled with a two tone grey powder paint finish (base is dark satin grey, slope top is smooth light grey). • Comes with four self-adhesive rubber feet and required hardware.

Product Features: • Heavy duty, 18 gauge steel - top and bottom case in satin black or gulf blue powder coat. • Available with either sold or vented tops and bottoms. • Easy to machine 0.064" thick aluminium front and rear panels (one satin black and one contemporary grey for each enclosure). • Symmetrical design so either end panel can be used as a front or rear panel. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include one horizontal row of louvers for ventilation. • Choice of sloping or vertical sides by reversing case. • Includes an handle (Part number 1427C1) and holes in the top for mounting. Also includes plastic plugs if handle is not desired. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware. • Assembled with 8 machine screws into weld-nuts for repetitive assembly and disassembly.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include two horizontal rows of ventilation. • Choice of sloping or vertical sides by reversing case. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware.

Product Features: • Made of strong, economical 20 gauge steel. • Rugged powder coat finish: beige panels with textured black covers. • Choice of sloping or vertical front panels by reversing case. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • All steel, heavy duty construction designed to house heavy, heat producing items such as power supplies. • Bottom of unit is 16 gauge steel, top is 18 gauge steel. • Finished in a rugged beige powder coat. • Top half is of an upside down "U" shape design for easy removal, bottom half is also "U" shaped but includes a fold on all sides including front and back for extra strength and mounting of top case. • Top case section is heavily ventilated for excellent air circulation with an attractive slant (also doubles as a lifting area - both front and back). • Top lip extends 0.75" (19mm) on both sides adding 1.5" (38mm) to the total depth. • Bottom is solid except for 4 holes for mounting heavy duty rubber feet. • Includes nickel plated self-tapping screws and screw on 0.75" (19mm) high, rubber feet (1421T7).

Product Features: • 20 gauge steel cover and 18 gauge base and frame (for strength) finished in beige. • Easy to machine .064" thick aluminium panel painted stain black. • Assembly screws and self-adhesive rubber feet included.

Product Features: • Top and bottom made from 12 gauge aluminium finished in beige. • Top and bottom are attached to an internal aluminium extrusion which contains mounting slots for printed circuit boards or panels. • Front and rear panels are natural aluminium (paper coated one side) which are attached with screws to the aluminium mounting extrusion. • Panels can be easily removed for access to components. • Tops and bottoms are available in solid or with vent slots. • All hardware and self-adhesive rubber feet are included. • Replacement hardware packages include front panel screws, side screws, extrusions, and rubber feet.

Product Features: • Heavy duty, 18 gauge steel top and bottom halves finished in beige powder coat. • Easy to machine 0.064" thick aluminium panels, front finished in textured black and vented back finished in beige. • Rear panel is vented at top and bottom. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Heavy duty construction walnut chassis. • Top panel available in a choice of natural aluminium or satin black powder paint finish. • Walnut chassis is 0.778 inches thick (19.8mm) - corners are produced with wood bracing and dovetail construction methods. Designed to handle heavy components. • Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2mm) thick. Fully "framed" support from walnut chassis. • Includes four large ground rubber feet (0.75" dia. x 0.56" high) with mounting hardware into inserts to avoid wood damage. Hardware is of proper length to allow use of optional bottom plate.

Product Features: • Spot welded - heavy duty construction chassis. • Natural aluminium finish - also available in painted steel with walnut side panels. • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting). • Usable surface of chassis front, back and top are reduced by roughly 7/8" (22mm) due to inset in walnut sides. • Optional bottom plates are punched with 4 holes - 3/16" diameter. • Note: The steel chassis covers (1451 Series) are NOT compatible with this series.

Product Features: • Spot welded steel - heavy duty construction chassis. • Finished in ASA 61 smooth grey or satin black powder paint. • Optional bottom plates are punched with 4 holes - 316" diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates). • Rubber feet sold separately. • Some models accept chassis covers (1451 Series). • Upgrade to the Satin Black Chassis with Walnut Sides (available for some sizes).

Product Features: • Moulded from a black, glass reinforced polyester. Smooth finish. • Includes Gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North American Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Enclosures have an impact rating of IK09 in conforming with IEC 62208 and IEC 62262. • Lid contains self captivated stainless steel screws. • Gasket is silicone. Heat resistance 100°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • "Styled" lid version has three main advantages over the flat lid (1555 Series) features below: • Smooth recessed surface on lid for a membrane keypad or label • Standoffs moulded in the interior of the lid (except for size "B"). Designed for #6 self tapping screws • More modern "styled" look V's the traditional flat lid (1555 Series). • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating. • Polycarbonate versions are UL 508A listed (File #E65324). • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water.

Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.

Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating. • Polycarbonate versions are cUL and UL 5008A listed (File #E65324). ABS plastic versions are not UL listed. • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed). • Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only).

Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded body includes a slide removable "belly" plate - except in smaller sizes "A" through "D".

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Integrated slotted flanges allow for easy wall mounting. • Flange provides a completely flat bottom surface and transitions seamlessly into the extrusion body for a finished look. • Sized for 50mm wide PC boards. • P.C. boards mount into extrusions by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of 0.06" (1.5mm).

Product Features: • Designed to house P.C. boards or equipment. • Easy wall mounting or shelf mounting with two removable flanges. • Sized for standard Eurocard P.C. boards. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Two piece body - with easily removable belly plate for easy access to top interior of enclosure. • Extruded body and aluminium endplates with a choice of either clear or black anodised finish. • Includes eight (8) assembly screws - either clear or black assembly screws to match enclosure panels and body. Note: Recommended screw torque i 5 lbf.in (56.5 cN.m).

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc, etc). • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components. • Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws). • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label. • Standoffs moulded in the interior of the lid and enclosure - designed for #4 x 1/4" self tapping screws (Part number 1555TS100). • Choice of two materials: • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) - Recommended for outdoor use • Colour is a light grey (RAL 7035) to help keep heat absorption down.