Component - Import export

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Designed for general purpose or replacement use in Push-Pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz at full rated power (+/- 1 db max. ref. 1 Khz). • Open style with minimum 5" long primary leads. • Secondary solder lugs for convenient secondary connections (except 125B - uses minimum 5" secondary leads). • Primary impedances from 1,200 to 25,000 Ohms. • Secondary impedances from 1.5 to 15 Ohms.

Product Features: • 117/234 VAC - 50/60 Hz. dual primary. • Secondaries are either center tapped (C.T.) or dual secondaries for added versatility. • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).

Product Features: • Dual 117/234 VAC primary, 50/60 Hz. operating. • Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. • Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size). • 1,500 VA size - is supplied with a potted center for extra strength. • Minimum 8" long flexible leads. • Manufactured using Class B (130&de C) materials. • Hi-Pot test of 4,000VAC RMS between primary and secondary. • UL recognized to UL506 (XPTQ2.Guide) UL file #E207860. • CSA certified to C22.2 #66 - CSA file #209651. • CE compliant to IEC 61558-2-4.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).