Results for
KGA ENCLOSURES LTD
United Kingdom
Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body, • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • Diecast aluminium end panels are rugged - yet easy to machine. Front and rear gasket is a full perimeter conductive foam/fabric made of a Ni/Cu (nickel/copper) and CPSA (conductive pressure sensitive adhesive). • Designed to meet IP54 ratings. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Two piece construction. Integral card guides accept 1.5mm (0.062") P.C. cards. 0.20" diameter stand off bosses in the base for supporting various subassemblies. • Integral brass bushings with four M3 x 0.5" x 8mm (0.31") Philips pan head screws hold recessed panel into sloping front of case. • 1.01mm (0.04") aluminium panel with paper on one side. • Four self-adhesive feet included. • Stocked in black and grey.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KGA ENCLOSURES LTD
United Kingdom
Product Features: • Heavy duty, 18 gauge steel - top and bottom case in satin black or gulf blue powder coat. • Available with either sold or vented tops and bottoms. • Easy to machine 0.064" thick aluminium front and rear panels (one satin black and one contemporary grey for each enclosure). • Symmetrical design so either end panel can be used as a front or rear panel. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Top and bottom made from 12 gauge aluminium finished in beige. • Top and bottom are attached to an internal aluminium extrusion which contains mounting slots for printed circuit boards or panels. • Front and rear panels are natural aluminium (paper coated one side) which are attached with screws to the aluminium mounting extrusion. • Panels can be easily removed for access to components. • Tops and bottoms are available in solid or with vent slots. • All hardware and self-adhesive rubber feet are included. • Replacement hardware packages include front panel screws, side screws, extrusions, and rubber feet.
Request for a quoteResults for
Aluminium one - Import exportNumber of results
8 ProductsCompany type
Category