Valves - Import export

• Fully engaged rolled bonnet threads provide protection from process media by a metal body / bonnet seal. • Swaged self centering non rotating Duplex stem point ensures positive seat closure under all conditions. • Rolled stem threads protected from process media by fully adjustable sandwich’ packed gland. • Fully back seating - bonnet with anti blowout stem. • Totally encapsulated dust seal gives greater stem thread protection. • Vibration proof handle with positive location and excess torque break feature. • NACE MR-01-75 standard. • Fully developed field mounting system for all products. • All options available. Full range of materials, thread types and sizes. • Conformance to ASME B31.1 • Pressure - Temperature ratings as listed in ASME/ ANSI B 16.34 Class 2500. • All Pressure wetted parts fully traceable and certified in accordance with EN10204 31B. • Material of construction as listed in ASME/ANSI B 16.34. • Guaranteed 4 time factors of safety at Class 2500.

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#strainers

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#ball-valves

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#marine

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#direct-acting

We supply a full range of Forged and Cast Steel Valves 15Olb through 2500lb Flanged screwed and Socket weld Ball, Gate, Globe and Check Valves Carbon, Low Temp Stainless Steel and Duplex Material Grades available.

Gunmetal fire hydrant valves are available as a globe valve or a gate valve. Globe valves are made in 4 different patterns, horizontal, right angle, oblique or bib nose.They can be supplied with a flange or threaded inlet and with 2.1/2" instantaneous, threaded or Storz outlet.

A Steam Conditioning Valve / Combined PRDS Valve is the combination of pressure reduction and temperature reduction of superheated steam to fit process needs, protect downstream equipment or allow the use of less expensive materials or schedules for downstream piping. This is done with a pressure reducing valve and a spray water addition section either as separate units or a single device. Pressure reduction is carried out with a pressure reducing trim within the valve body, usually multi stage pressure reduction. The pressure is controlled by an upstream or downstream pressure controller, signaling the valve to modulate to maintain the pressure at the required set point.Temperature is controlled by adding water to the steam in such away that it will get fully evaporated in the steam, termed as desuperheatmg. These applications are normally considered to be some of the most severe services of any valves in a modem steam plant.

Jet Flow Safety Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service. Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure. Jet Flow Designed Safety Valve with Full Nozzle & hardened disc to minimize maintenance and increase seat life Open bonnet & Close bonnet both design have maximum set pressure 75 bar in Safety Valves. Material of Construction. Set pressure in psig or Kg/cm2 (g). Maximum inlet temperature. Allowable overpressure. ServiceSpecify either the media to be handled or the following physical properties or both. LiquidsSpecific gravity (Water = 1) GasesSpecific gravity (Air=1) VaporsMolecular weight (mixture of vapors. The average molecular weight) Back pressure, if any. Required capacity. Type of Endconnections. Preferred inlet size.

Turbine bypass valves play a very major role in Power Plant applications. Within a short period of twenty four hours, a power plant may be required to operate at minimum load, increase to maximum capacity for major part of the day, immediately lower back to minimum load and then back to maximum capacity. Bypass System permit unit start up and shutdown in a lifesaving manner for critical heavy components in boiler and turbines. Jet Flow Bypass valves are supplied with hydraulic, electric or pneumatic actuators as per the process requirements alongwith complete control systems as an option.

Needle Valves & Manifolds Ball Valves & Manifolds Monoflanges Flanged Manifolds – Single & Double Block Bleed (DDB), Ball/Needle/Ball 3 Valve Manifolds – Double Block & Bleed (DBB) & Single Block & Equalise 5 Valve Manifolds – Isolation Valves With Bleed, Test & Vent Facility Triple Offset Butterfly Valves Control Valves (Rotary, Sliding Stem & Sanitary) Solenoid Valves Hazardous Area Solenoid Valves

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#air-release

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#gate

Rat Blockers are designed to stop rats travelling through drains and are installed into pipes within inspection chambers (manholes). They are usually installed into the drain outlet, but these models can be easily configured to be fitted into a drain inlet. Rat Blockers allow rats to pass freely downstream, but protect property by preventing their movement upstream. By installing a Rat Blocker into the drain outlet, all upstream branches are protected. Rat Blockers are robust stainless steel devices and are held securely in place with a tight friction fit. Due to their design, these unique Rat Blockers cannot become dislodged into the drainage line. Both designs can be fitted from ground level, using a specially-designed installation pole. Source One Environmental supply two designs of rat blockers and both are available to buy online: Ratwall by Metex and TX11 by Nordisk.

Bock F14/F16/FX14/FX16 Valve Plate Assy (Includes Gaskets)

Plastic RPE solenoid valves are used in many different industries and applications: • Landscape irrigation systems • Household appliances • Hydromassage • Sanitary applications • Water & drink dispensers • Steam Ovens and Steam Irons • Coffee machines • and many more......

These water inlet solenoid valves from RPE are suitable for household appliances (such as washing machines and dishwashers) applications and other equipment requiring a water supply cut-off valve. The R Series includes many different configurations: versions with one, two, three or four outlets arranged at 180º or 90º to the inlet are available. The standard inlet connection is 3/4"BSP male, outlet connection option including hosetail, threaded and John Guest push-fit. A mounting bracket is standard with most versions. The R Series is WRAS approved for potable water use.