Results for
ROLATUBE TECHNOLOGY LTD
United Kingdom
The Central Guy Control (CGC) can be used with the System 75 and System 100 masts to bring unparalleled ease, speed and flexibility to deployment. By bringing the control of three guy ropes to one person, the CGC uniquely enables the deployment of a mast system of up to 10m (32.8’) by only 2 people, instead of the usual 4. A video showing the CGC being used in the setup of the SYSTEM 100 mast is here.
Request for a quoteROLATUBE TECHNOLOGY LTD
United Kingdom
Available for System 75 & 100 masts Max height of 13m (with System 100) Compatible with 3.5m IAMs MIL-STD-810G Rolatube’s innovative 3.5m IAM mount kit enables you to raise your 3.5m IAM to previously unattainable heights by mounting it on top of the System 75 single tube mast or System 100 mast. The mount kit enables the user to mount the Rolatube 3.5m IAMs onto System 75 single tube masts (up to 5m) and System 100 masts (up to 10m), thereby enabling the following frequencies at even greater heights: 30-300MHz (SQUAD), 136-470MHz (TEAM) and 136-175MHz (RESQ). Heights achieved are up to 8m on the System 75 masts and up to 13m on the System 100 masts. Manufactured to adhere to MIL STD 810G, the Rolatube 3.5m IAM mount kit is unique to Rolatube Technology, manufacturer of the lightest weight mast systems in the world.
Request for a quotePROSAW LIMITED
United Kingdom
The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
A Chick Workholding Foundation Plate is tailored to fit the machine’s specifications. A standard grid pattern to simplify designing, cataloguing and utilisation of fixtures, providing consistency and repeatability to set-ups. Length and width tailored to the machine’s work envelope. Precision ground cast iron to 35mm thick. 50mm spaced holes, drilled and tapped, for use as both location and hold down. Sealed with chip plugs. An alpha-numeric labelling system. Minimises set up time from workholding system to system. Machine interface mounting holes, customised for each machining centre.
Request for a quoteP C HENDERSON
United Kingdom
Securefold offers the very best in exterior folding door hardware systems to help you securely open up an interior space to the outside world. The system has been designed for residential and commercial applications for top hung, exterior wooden or aluminium doors weighing up to 50kg, 100kg and 150kg. With all components made from marine grade 316 stainless steel, the system is extremely resistant against the elements and corrosion. The system comes in a range of stunning finishes (satin, chrome, gold and black) as well as three hinge types (mortice standard, mortice square and non mortice) meaning it can complement existing hardware and virtually any colour scheme. The system operates with effortless ease and combines all the aesthetic benefits of folding wooden doors with the additional advantages of uncompromising security and durability. Securefold 100 features all the benefits of both the 50 and 150 with the addition of a further enhancement, R-Loc – a clever ratchet sys
Request for a quoteP C HENDERSON
United Kingdom
Our automated Evolve system incorporates our popular Soltaire 120. The result is an exceptionally smooth and reliable automated system which can cater for single doors or two bi-parting doors with simultaneous action. Sliding doors can open at the push of a button, remote control or by activation of a movement sensor – offering the utmost in sophistication and convenience. Evolve is an ideal solution to improve mobility access or add a sophisticated feature to a home or light commercial application. Evolve comes complete with track, hangers, floor guide, track stops, automation kit and two wall mounted control panels as standard.
Request for a quoteP C HENDERSON
United Kingdom
Soltaire is a beautifully crafted top hung sliding system designed to accommodate interior and exterior doors of one sliding panel or two bi-parting doors on a single track. Designed for door weights up to 120kg, 180kg or 250kg the system is ideal for residential or commercial applications. Manufactured from marine grade 316 stainless steel the system is ideal for coastal environments due to its weather and corrosion resistant properties. Soltaire is available in ready made kits for ease of installation as well as being able to be specified as individual components. The system is also available in Soft Close, Low Headroom and centrefold and endfold. The track can be soffit fixed or face fixed for flexibility of installation.
Request for a quoteENERGY MAINTENANCE TECHNOLOGIES LTD (EMT)
United Kingdom
Used widely in electricity substation maintenance, Smartfill provides a simple, efficient, zero emission alternative to manual filling and top-up of SF6 compartments. Filling of newly installed SF6 assets and refilling of in-service assets can be achieved automatically during live energised operations. Topping up leaking or damaged SF6 assets can also be completed without an engineer. Designed to accurately measure, control and monitor SF6 gas passing through the network, this smart solution delivers compliant measurement of SF6 inventory and usage with complete traceability.
Request for a quoteWRIGHTS RECYCLING MACHINERY LTD
United Kingdom
This separation system is a totally new concept in granulated cable separation. Wrights Recycling Machinery’s cable separating systems will produce up to 99% clean copper and up to 99% clean plastic. This is a wet separation system with an optional dryer available. It can be manufactured in different sizes to process anything from 200kg –1000kg per hour. These systems can be manufactured to your requirements.
Request for a quoteADVANCE APPLIANCES
United Kingdom
The Plug n Glow is a small stainless steel flow boiler with many applications. It has 22mm connections for ease of installation, a 13 amp plug fitted and can be programmed up to 20 times a day seven days a week. It can be used in a sealed system up to 3 bar pressure or in vented applications. Temperature is adjusted from 30 to 80 degrees by a calibrated dial on the front of the case or it can be controlled by an off board thermostat. There is no restriction on the number of uses of the product It can be added to an existing gas or electric central heating circuit to boost the power if an extension has been added to the house; it can be used for a small office or garage workshop heating system - it will run a couple of radiators - or a standalone underfloor system in conservatories up to 20square metres floor area. Or use it to protect plants from frost in a greenhouse, or holiday homes from freezing in winter with a frost thermostat.
Request for a quoteKIPROM LTD
United Kingdom
"Get your robotic systems up and running smoothly with KIPROM Robotics Commissioning Services. Our team of experts will ensure that your robotic systems are properly installed and configured to meet your specific needs. Our commissioning services include: ● Equipment installation ● Software programming and configuration ● Safety and functional testing ● Operator training ● Integration with existing equipment and processes Don't let commissioning delays hold your business back, choose KIPROM Robotics Commissioning Services for a smooth and efficient start-up. Contact us today to schedule your commissioning services and experience the benefits of industrial automation in your business”.
Request for a quoteFORTRESS TECHNOLOGY (EUROPE) LTD
United Kingdom
The precision detector utilizes digital signal processing technology with high sensitivity levels to clearly identify the presence of a metal contaminant. Ferrous, non-ferrous and stainless steel fragments are successfully detected, and when equipped with a reject valve, rejected from production. A variety of valves, pipe materials and fittings are available to easily integrate into existing systems; all standing up to high pressure, temperature and washdown environments.
Request for a quoteTN INTERNATIONAL - WESTERN EUROPE
United Kingdom
ROOFplus Glass T-O Underlay SBS is a glass-fibre based torchon underlay, saturated and coated with high quality SBS (StyreneButadiene-Styrene) modified bitumen. The membrane is finished on both sides with a thermofusible film for fast and consistent torch-on application. ROOFplus Glass T-O Underlay SBS is designed for use as an underlay in built-up roofing systems or as a vapour check on newly built or refurbished flat roofs. They can also be used as part of overlay systems to existing asphalt or bituminous waterproofing. The product is not recommended for use as single ply waterproofing
Request for a quoteTN INTERNATIONAL - WESTERN EUROPE
United Kingdom
ROOFplus Glass T-O Underlay APP is a glass-fibre based torchon underlay, saturated and coated with high quality APP (Atactic Polypropylene) modified bitumen and mineral additives. The membrane is finished on both sides with a thermofusible film for fast and consistent torch-on application. ROOFplus Glass T-O Underlay APP is designed for use as an underlay in built-up roofing systems or as a vapour check on newly built or refurbished flat roofs. They can also be used as part of overlay systems to existing asphalt or bituminous waterproofing. The product is not recommended for use as single ply waterproofing
Request for a quoteREID LIFTING
United Kingdom
Our unique and innovative PORTAGANTRY RAPIDE is a height adjustable, foldable, portable aluminium gantry designed for rapid deployment. Capable of an impressive load lifting capacity of up to 1000kg. This system can be assembled and disassembled by just one person within a minute without the need for any tools and is the perfect solution for Confined Space Access, Rescue & Entry Lifting scenarios due to its unique features and ability to lift equipment and personnel.
Request for a quoteGUANGZHOU FIBERWDM ELECTRONIC TECHNOLOGY CO., LTD
United Kingdom
Product Function Hot pluggable QSFP28 MSA form factor Up to 80km reach for G.652 SMF with transport white box Single +3.3V power supply Temperature Range 0 to 70°C Transmitter: Cooled EML 2*27.5Gbaud/s DWDM TOSA Receiver: 2*27.5Gbaud/s Pin-PD ROSA 4*25G CAUI4 electrical interface Integrated SFEC with high coding gain PAM4 modulation format on 100GHz ITU DWDM wavelength grid compatible Dual CS adaptor Compatible with RoHS6
Request for a quoteTURBINE CONTROLS LIMITED
United Kingdom
The TCL SMARTStart System uses solid state components to control the current though the starter to provide a more progressive increase in current (soft start). This greatly reduces the stresses on the starter motor, increasing life and reliability. The SMARTStart System includes an integrated micro-controller to provide:- -Programmable current profile during start up -System diagnostics, to detect starter motor faults -Interface with the existing control system via hardwired inputs & outputs -Serial communications interface, via Ethernet The system comes with a choice of either a wall mount or floor mounted panel, both of which have a greatly reduced footprint when compared to typical electrical contactor systems. The panel is designed to minimise Installation and commissioning time which can typically be completed in one day.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Ups systems - Import exportNumber of results
17 ProductsCountries
Category