Universal - Import export

Features Strong Thick Moroccan Leather Suedette Lining Removeable Cross-Body Strap Hand-Stitched Details 4 Inside Compartments (2 Zipped) Zipped Pocket on Reverse Space for A4 Folders and 13" Laptop Size Guide Large Satchel Height: 29cm Width: 39cm Depth: 6cm Medium Satchel Height: 27cm Width: 36cm Depth: 6cm Mini Height: 22cm Width: 28cm Depth: 6cm

Features Strong Thick Moroccan Leather Suedette Lining Removeable Cross-Body Strap 4 Inside Compartments (2 Zipped) Zipped Pocket on Reverse Space for A4 Folders and 13" Laptop Size Guide Large Satchel Height: 29cm Width: 39cm Depth: 6cm Medium Satchel Height: 26cm Width: 36cm Depth: 6cm Mini Satchel Height: 22cm Width: 26cm Depth: 6cm

• Waterproof Outer Fabric. • Made from 100% Recycled Plastic Bottles. • Rich Full-Grain Leather. • Comfortable Swivelling Shoulder Straps. • Detachable Magnetic Key Chain included. • Special Pockets for Cords, Business Cads and more. • Padded Laptop Compartment, fits 16" Laptops. • Padded Tablet Compartment, fits 13" Tablets. • Custom Made Aviation Grade Aluminium Buckles. • Handmade by expert craftsmen in Spain. Carry all your working essentials in a smooth fashion, our Office Backpack has a pocket for anything you may need, from laptops, water bottles and more. Our Office Backpack has been thoughtfully designed with hard-wearing, durable, premium materials that will stand the test of time whilst keeping a timeless luxurious look, perfect for work, commute, travel or the office. From laptops, chargers, tablets, documents, AirPods to A5/A6 Notepads, business cards, pens, cords and more.

Material: Leather Interior Material: 100% Polyester Interior Details: 1 Padded Laptop (15.6”) Pocket, 1 Zip Pocket, 2 Slide Pockets Measurements: 37 cm L x 6 cm W x 28 cm H Handle Strap Description: 1 Webbing Strap, 2 Handles Primary Colour: Black Hardware: Metal Exterior Details: 1 Back Zip Pocket, Front Slide Pocket with Hidden Magnetic Snap Closure: Zip

Product Features: • Designed for general purpose or replacement use in Push-Pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz at full rated power (+/- 1 db max. ref. 1 Khz). • Open style with minimum 5" long primary leads. • Secondary solder lugs for convenient secondary connections (except 125B - uses minimum 5" secondary leads). • Primary impedances from 1,200 to 25,000 Ohms. • Secondary impedances from 1.5 to 15 Ohms.

Description: Diathermy plate split with leadwire, Single use Universal, Monopolar grounding pad, universal / general, with 3m lead wire, 6.3mm plug, single use. NHS NPC Code: FDJ3088 Manufacturer Code: GP202D-AC-U No. of Items Per Box: 25 No. of Items Per Carton: 200 Order: Direct from ALXR, Blue Diamond E-Direct Medical supplies Medical equipment Medical devices Hospital supplies Surgical instruments Diagnostic equipment Laboratory equipment Medical consumables Rehabilitation equipment Mobility aids Home healthcare products Patient monitoring systems Emergency medical equipment Imaging equipment Dental equipment Veterinary equipment Disposable medical supplies Sterilization equipment Anesthesia equipment Respiratory equipment.

digifilm® is designed for creating vivid retail graphics displays throughout a store or showroom environment that can be installed and updated quickly and easily without the need for specialist installation teams. Thanks to its light and flexible nature, digifilm® is suitable for large format displays on flat or curved surfaces, making it a versatile choice for retailers and printers alike. As digifilm® is a ferrous media held in place by magnetic attraction, additional layers can be applied over one another as and when required, allowing promotional messages or additional images to be added and removed in seconds by in-store staff. digifilm® is both wide format and universally printable; the range has been developed to work with all print management providers and includes variants compatible with UV, Solvent, Eco-Solvent, Latex and Pigment inks, and can be printed by roll-to-roll and flat bed techniques.

Huron MU5 Universal Milling Machine X stroke: 1300 mm Stroke Y: 700 mm Z stroke: 500 mm Spindle: SA40 Spindle speed: from 30 to 2066 rpm. Table surface: 1630 x 460 mm DRO Speed variator of the feeds Width: 2400 mm Depth: 2200 mm Total height 2300 mm Weight: approx. 4 T Various tooling

Gidrolast knows heavy trucks. We cut our teeth building hydraulic cylinders for heavy trucks all the way back in 1993. Hydraulic cylinders on trucks are subjected to all forms of contamination that would destroy a poorly designed cylinder. Dirt, grit, rain, salt, tar, chemicals, solvents and cleaning agents all combine to attack the cylinder and its seals. Despite all this, the cylinders are still expected to perform. Cylinder failure means downtime, employee overtime, loss of vehicle availability, less productivity and reduced profit. Gidrolast cylinders are built tough to meet these conditions. They can be found mounted on garbage trucks, dump trucks, belly dumpers, semi end dumpers, boom trucks, knuckle boom loaders, road pavers, concrete mixers, concrete pumps, mobile cranes, tilt beds and tow trucks. Applications include dump cylinders, aerial boom cylinders, compaction cylinders, outrigger cylinders, tilt cylinders, swing cylinders, plough lift cylinders, and more.

Universal adaptor with 3 USB and 1 Type C port wherever you go in the world you are not out of power

The HETAS listed SFUTS pre plumbed pre wired Universal Thermal Store has been designed to link a number of heat sources including gas or oil boilers, wood burners, and solar thermal or PV as well as electric and other inputs. Hot water is safely delivered at mains pressure through a large integral coil for fast bath filling and power showering without a pump. In summer the solar coil, if utilised, will provide most of your hot water needs. In the winter the wood burner, when lit, will handle most of the heating and hot water duties. Central heating is taken from the store which acts as a buffer for fast radiator or under floor heat up. The store is kept hot by the energy inputs controlled by thermostats. Because the unit is a sealed system it is fine for under floor systems. The primaries are 28mm and can be teed off for two separate circuits if required.

We stock a huge range of replacement garage door & roller shutter remote controls. If you cant see what you are looking for please contact us and I'm sure we'll be able to help.

Our Industrial Interchangeable Power Suppliers have: - Universal Input 100-240V AC - Constant Voltage, current limited - Low standby power - High efficiency - Continuous short circuit proof - Been independently safety tested Since the invention of the 1st interchangeable unit in 1971, FRIWO has been a byword for innovative and reliable PSU´s. The current series extends from 3 to 150 watts and from 3 to 48 V DC, so whether plugtop or desktop, Haredata Electronics and FRIWO have the solution to meet your requirements. All FRIWO products are independently certified for use in Europe and the USA - including UL approved output leads - and many carry additional approvals as standard. FRIWO offer their expertise and support to obtain approval for any market in the world through the CB scheme, including use of their own EMC chamber at the factory in Ostbevern.

Part of our core business at Firow Propshafts is the manufacture, repair and distribution of truck, HGV and Bus Propshafts. Since 1981, we have delivered a range of truck, HGV and bus propshafts for all makes and applications. Our service is built on the understanding that a truck not operating is a truck not earning money. That’s why we offer a 24-hour turnaround on new propshafts with shorter lead times available within our local area for repairs. Next time a broken truck, HGV or bus propshafts gives you a VOR headache, give us a call. As well as our rapid turnaround VOR service, we can also provide small-medium batch work. So, whether you’re a stockist, fleet operator or repair facility, we can offer a saving based on batch quantity purchases. All of our new truck, HGV and bus propshafts are built by our in-house experts using high quality components. All we need is your registration, VIN, OEM part number or a pattern unit.

The repair and manufacture of propshafts for plant vehicles is part of our capabilities at Firow. We stock all the components to both manufacture and repair propshafts for a number of makes and models of plant vehicle. The makes we cover include: Volvo (CE) Caterpillar JCB Liebherr Terex Komatsu Hitachi Case (CNH) All we require is the part number for the propshaft or the drawing, and then we can progress with the work. As with all our propshaft manufacturing and repair work, we will make an honest and realistic assessment of the feasibility of the work. Before we start, we will always discuss the price of the work to be done, as well as the specifics of the work we will undertake.