Results for
ROTAFIX
United Kingdom
Rotafix Aquachem is a solvent-free coating used a membrane for tanking, waterproofing, gas barrier and as a high-performance floor coating. Rotafix Aquachem is a 2-part liquid epoxy that can be applied as a floor finish. Combining aggregates with the top coat creates a skid resistant surface. Adding flakes to the top coat will give a decorative finish. It has been used extensively in food preparation areas and medical environments as it is easy to clean, resistant to chemical cleaners and resistant to the formation of mould. Rotafix Aquachem can be used as a liquid applied damp proof membrane. The liquid membrane can be applied to prevent moisture ingress both positively and negatively. So if it is applied to the outside of a wall, water will not penetrate, equally if is applied internally then moisture penetrating the substrate will equally not penetrate. The average bond strength of Aquachem is 4N/mm2 , it would require a head of water of 600m to force the Aquachem to break away.
Request for a quoteBALABAN54 MAKINA DIS TIC LTD STI
United Kingdom
Manufactured from AISI 304 Quality Stainless Steel,200 Lt. capacity, single-lined, three-walled; steam cooker,two 10 Kw resistors at bottom, Baykal Resistance brand with insulation,insulated, insulation thickness 7 cm,2 mixers, outlet butterfly valve DN50, water inlet and outlet 3/4 inch sleeve,0,37 kw agitator motor and 90 rpm reducer. Reducer Yılmaz Reducer Mark,380 V preference, Hair thicknesses: 1,5 mm, 2,5 mm.Dimensions: 120mm X120mmx140 Foot Length: 230 mm Foot Length: 230 mm Weight: 400 kg
Request for a quoteENDURAMAXX
United Kingdom
Industrial water and chemical tanks serve a variety of purposes. They need to be strong and non-reactive with the chemicals they contain. Enduramaxx plastic rotationally moulded tanks are made from polyethene (PE) or Polypropylene (PP) according to which chemicals are to stored, and they are UV stabilised to withstand many years of outside use. These industrial chemical tanks are available with customised fittings and flanges. These include BSP inlets and outlets, PN16 and ANSI flanges, welded sockets, vents and fume proof lids for fuming chemicals. Liquid level sensor assemblies, fill pipes and suction pipes are available terminating in BSP and flanged connections.
Request for a quoteENDURAMAXX
United Kingdom
Enduramaxx’s Open Top Cone tanks are available in a range of 25 sizes and are constructed so as to have a consistent wall thickness and chemical resistance. They are ideal for the blending of or containment of liquids. These plastic tanks are supplied as standard with a heavy-duty galvanised steel support frame, also available without frame.
Request for a quoteENDURAMAXX
United Kingdom
Horizontal Water Tanks & Bowsers These Horizontal Tanks & Bowsers are designed for the transportation of liquid such as water and liquid fertiliser. The tanks are designed to mount onto straight to flat surfaces with a unique pin mounting system without the need of mounting frames or steel mounting straps and are highly impact resistant and easy to fill. The horizontal plastic tanks are manufactured from WRAS approved polymer for the storage of drinking water (black, boat blue or natural coloured tanks only). These can be used as sprayer tanks or water bowsers for agricultural sprayers with a range of sprayer camlock fittings available to suit your sprayer. The optional Ball Baffle System guarantees fluid stability for safer operation, reducing fuel usage and mechanical wear & tear.
Request for a quoteENDURAMAXX
United Kingdom
Enduramaxx mixer tanks are available in both standard flat base and also cone base versions. Sizes range from 250 litres to 30,000 litres to meet the demands of many applications. Robust and sturdy together with quick and easy set-up, our HDPE mixer tanks are designed to last. Enduramaxx can also offer completely bespoke solutions for your facility including mixer frames, ladders, platforms and level indication.
Request for a quoteENDURAMAXX
United Kingdom
Clarifier / Clarification Tanks For Wastewater Treatment Enduramaxx’s Clarifier / Clarification Tanks are used for the continuous mechanised removal of suspended solids or solid particles from a liquid. These plastic water tanks, or conical clarification tanks or clarification cone bottom tanks are available in a range of sizes. open top clarifier water treatment is part of the primary water treatment process to remove solids. What Is The Clarification Process? Primary (mechanical) treatment/Clarification is designed to remove gross, suspended particles and floating solids from raw sewage or wastewater. It includes screening or a weir to trap solid objects and sedimentation by gravity to remove suspended solids. This level is sometimes referred to as “mechanical treatment“, through chemicals.
Request for a quoteENDURAMAXX
United Kingdom
Cone Bottom Conical Tanks for Complete Drain Applications Cone Bottom Conical Tanks provide the ultimate solution for applications that require a complete drain. These help for the efficient processing of some liquids and can save money and time when compared to a flat bottom storage tank. Other applications for these conical cone bottom tanks include a settlement tank or sludge tank. A Unique Full Drain Solution Conical tanks are unique in that their contents discharge completely through a cone point at the centre of their base. Their cone base and smooth internal walls ensure complete discharge. This has clear advantages for food production, fermented beers, mixing tank, manufacturing and farming applications. Enduramaxx cone bottom tanks provide a unique solution with choices of a 5, 15, 30, 45 and 60-degree cone. This cone angle ensures maximum performance, with even the most viscous liquids not building up inside the tank.
Request for a quoteENDURAMAXX
United Kingdom
Static Horizontal Water Tanks These static horizontal water tanks are ideal for both rainwater and potable water storage. These horizontal static tanks, with their individually proven designs, are available to meet the widest possible range of uses in rainwater harvesting and management.
Request for a quoteENDURAMAXX
United Kingdom
Enduramaxx’s Chemical Dosing Tanks available from 50 litres to 1500 litres storage capacity. Anyone who works with chemicals needs to store them safely and these moulded PE or PP tanks are specifically designed for use within the water treatment, purification, chemical dosing and storage applications. These bund tanks are designed specifically for use in the water treatment, effluent treatment and process control sectors, these are UV stabilised and available in black for use with chemicals such as Sodium Hypochlorite and suitable for Hydrogen Peroxide. These cylindrical chemical storage tanks include a flat raised section shelf section to mount equipment on top of the tank. This is ideal for mounting items such as chemical dosing pumps, industrial mixers, and instrumentation. Suitable for liquids up to 1.5 specific gravity.
Request for a quoteBALABAN54 MAKINA DIS TIC LTD STI
United Kingdom
Open or enclosed milk acquisition tanks, provided with 600 Lt to 2000 Lt capacity options Capacity: 600, 800, 1000, 1500, 2000 LT
Request for a quoteBALABAN54 MAKINA DIS TIC LTD STI
United Kingdom
These tanks are provided in different capacity options between 1000 Lt and 25.000 Lt; as single walled or insulated tanks with heating and cooling facilities, produced especially for different materials such as milk, fruit juice, olive oil, stum (must) or glucose.
Request for a quoteENDURAMAXX
United Kingdom
Enduramaxx rainwater harvesting tanks are available for above and below ground installations. Above ground plastic rainwater tanks are able to store up to 90,000 litres which can be used for agricultural sprayers off a grain store, water for dairy wash down from barns, pressure washers, greywater systems for flushing toilets for commercial factories and office blocks and a number of applications for washing and cooling in industry. If you require more storage, please contact our sales team for a quote. Below-ground tanks are available from 800 litres to 9,500 litres capacity, with the option of plastic or galvanised lid and a range of turret sizes. Rainwater filters are available for removing leaves and moss out of the water coming off the roof to save a build-up of sediment in the tanks.
Request for a quote99PLAS
United Kingdom
Material: MDPE Regrind -Green Oil Tank No EVOH Content Grade: Jazz Place of Origin: United Kingdom To make an offer on this material, please email at marketing@99plas.com
Request for a quoteAFC VALVES UK LIMITED (ALPINE FLOW CONTROL)
United Kingdom
Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#surge
Request for a quoteABFAD LTD
United Kingdom
ABFAD Ltd have developed the perfect solution to protect damaged and corroded Storage Tanks, a major problem in the industry. The FUELVAC® double skin lining system, Abfad’s patented solvent-free vacuum monitored lining process, bringing a new, innovative dimension to storage tank repairs and tank corrosion protection. Cost and time savings over traditional methods are significant and tank downtime is greatly reduced, which means that the repaired tank can be brought back into full use in a very short timescale; whereas traditional methods of storage tank maintenance can leave the tank owner without the use of a very valuable asset for an extended period of time. The double skin tank is then connected to remote vacuum monitoring applications that check the integrity of the installation every second of every day, ensuring piece of mind and a totally professional approach to tank storage maintenance. Fuelvac® can be installed in above or below ground tanks of any size.
Request for a quoteABFAD LTD
United Kingdom
Here at Abfad Limited we have over 10 years’ knowledge and experience lining and repairing storage tanks of all different shapes and sizes, above ground, underground, some in good condition, some in bad condition. One thing is clear from our time in this industry, corrosion is the main enemy of the storage tank and shortens its life span considerably. Solvent free single skin tank lining to provide an internal single skin within the storage tank which encapsulates the steel and prevents corrosion taking place within the tank. Fuelavc® double skin tank lining system with class 1 vacuum pressure leak detection monitoring for above and below ground tanks of any size. Fuelvac® provides two levels of protection within storage tanks, it protects the steel from corrosion due to the protective solvent free coatings and the unique nature of the vacuum system, and also provides 24/7 leak detection monitoring of the tank. Speed of installation means that tank down-times are greatly minimised.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TANKS AND VESSELS INDUSTRIES LTD
United Kingdom
We stock the worlds largest selection of used stainless steel tanks. These range from 50 to 250,000 litre, and are applicable in a wide variety of industries including the beverage, food, chemical, pharmaceutical, waste, dairy and water treatment industries.
Request for a quoteTANKS AND VESSELS INDUSTRIES LTD
United Kingdom
Our custom-built fabrication shop is 34.5m by 24.0m with an under hook height of 14.0m – enabling us to manufacture stainless steel vessels from as small as 2 litres right up to 180,000 litres. We mainly use grade 316 stainless steel, however we can also manufacture vessels in stainless steels (304, 316 and 321 grades) and in other materials on request.
Request for a quoteREGAL TANKS
United Kingdom
We stock a large variety of used storage tanks. Capacities from 10,000 litres to 100,000 litres. Our stock is constantly changing.
Request for a quoteREGAL TANKS
United Kingdom
40,000 - 125,000 litre storage tanks available for hire. Available as horizontal or vertical. Fast delivery, large capacity storage for the largest projects.
Request for a quoteResults for
Tanks - Import exportNumber of results
22 ProductsCountries
Company type