Results for
1ST MACHINE TOOL ACCESSORIES
United Kingdom
Larger Bore to Accept Larger Components down the Spindle Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Industry Standard Large Bore 3 Jaw Chuck Kitagawa's chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. The BB series has a big bore to accept larger components down the Spindle. BB200 series chucks are supplied with a blank drawnut as standard with a set of T-nuts.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Compatible with large, readily available, range of jaws Two stage gripping gives clamping and seating of part Base jaws do not protrude on z axis Sealed body design Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa DL Series are the 1st chuck with two stage gipping action, firstly parallel clamping then pull back action for work seating.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Equalising mechanism securely grips variable thickness Face Clamping Reduces distortion Lever finger chucks allow for large thin wall parts Two jaw for irregualar compounets The Kitagawa FGT series are speical design finger jaws which rotate in and down to clamp, this make them idela for holding flanges or other speical compounets. They also come with a equalisation mechanism for variable thickness. The FGT is a two jaw finger chuck to allow for irregualar compounets that need speical holding.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
For example- Full System Chuck Adaptor Threaded Connector Drawtube Cylinder Adaptor Hydraulic Rotating Cylinder Anti Rotation Bracket Drain, Hoses and Fittings Part systems can be either: Front End- Chuck Adaptor Threaded Connector Drawtube Rear End: Drawtube Cylinder Adaptor Hydraulic Rotating Cylinder Anti Rotation Bracket Drain, Hoses and Fittings Or indeed any part(s) there of.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Included in this product range- 3 jaw closed centre power chucks- Ø630-1000mm master jaw serration 3/32” x 90° wedge type 3 jaw open centre power chucks- Ø630-1000mm master jaw serration 3/32” x 90° wedge type 3 jaw large diameter power chucks- closed centre: Ø1000-2000 activation through hydraulic cylinder built in or separated from the body manual regulation of the stroke of the jaws 2 + 2 large diameter power chucks- Ø630-2000mm 2 + 2 jaws with independent activation by hydraulic twin cylinder for clamping of irregular workpieces. lever type Large bore pneumatic chucks- Ø630-1000mm pneumatic cylinder built in the chuck body twin security valve in the chuck maintains the air pressure during machining even when the pressure is less than pre-set safety level safety pressure control device to stop the chuck rotation when a pressure loss is detected
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle NosesStandard spindle adaptors to suit power chucks with a 380mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Included in this range- Large bore 3 & 4 Jaw Self Centring Chucks- Ø500-1800mm steel body cast iron available Ø500-630mm centring tolerances according to UNE 15-430-94/ISO 3089:1991 norm 4 jaw independent chucks with one piece jaws- Ø500-1500mm cast iron or steel body solid reversible jaws direct mounting 4 jaw independent chucks with two piece jaws- Ø500-1500mm cast iron or steel body two piece jaws according to ASA norms jaws direct mounting heavy duty 4 jaw independent chucks- Ø600-2000mm heavy duty steel body two piece jaws according to ASA norms jaws long master jaws for added rigidity direct mounting 3 and 4 jaw self centring VTL chucks- Ø700-1800mm specially designed for vertical lathes steel body central cover and long base jaws covering the spindle nose of the lathe induction hardening of all gliding areas 3 jaw oil country self centring chucks- Ø500-1000mm forged steel body extra heavy duty American Standard, hard top and master jaws
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Ideal for irregular shaped components Soft jaws included with the chuck Better clearance on speicalist parts The JT series scroll chuck provides the optimum solution for gripping valves, pipe joints and other irregularly shaped components. JT series scroll chuck includes one set of soft jaws.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Usefull for thin wall parts High Rigidity, durability and rotational speed Quality steel use for corrosion resistance Cross guide reduces runout and distortion Kitagawa JS07 4-Jaw Scroll Chuck. The JS series scroll chuck provides the optimum solution for gripping valves, pipe joints and other irregularly shaped components.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Quality steel use for corrosion resistance High Rigidity, durability and rotational speed Cross guide reduces runout and distortion Comes with internal and external jaws Scroll chuck with integrated jaw (Straight recess) includes each one set of internal jaws and external jaws as standard. JN models cannot use soft jaws. When the soft jaws are used for SC-F type, use the chuck of lower specification. (SC-3, 4, 5, 14, 16 are made of cast iron and JN-6, 7, 9, 10 and 12 are made of steel.)
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Quality steel use for corrosion resistance High Rigidity, durability and rotational speed Cross guide reduces runout and distortion Two piece jaws for quicker and easier jaw change over Scroll chuck with 2 piece Jaw (Straight Recess) - 3 Jaw Scroll Chuck featuring steel body construction to increase body rigidity and improved durability.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Cross guide reduces runout and distortion High Rigidity, durability and rotational speed Two piece jaws for quicker and easier jaw change over Direct mount to short taper so adapter isn't needed 3 Jaw Scroll Chuck featuring steel body construction to increase rigidity and improved durability. The JN-RA series have short tapers built-in, therefor adapters are not needed. Chucks are supplied with standard hard jaws with soft jaws available if needed.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Cross guide reduces runout and distortion Ideal for irregular shaped components Independent jaws allow for off centre holding Kitagawa chucks are manufactured from high grade alloy steel. The IC series are four jaw independent chucks with front mount holes. IC series chucks are supplied with a set of hard jaws.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Direct mount to short taper so adapter isn't needed Cross guide reduces runout and distortion Ideal for irregular shaped components Independent jaws allow for off centre holding Kitagawa IA 4-Jaw Closed Centre Chuck have a steel body and direct mount. Supplied with reversible hard jaws for ID and OD gripping.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggressive first operation gripping of rough bar work. Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggresive first operation gripping of rough bar work.Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggresive first operation gripping of rough bar work.Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
1ST MACHINE TOOL ACCESSORIES
United Kingdom
Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggressive first operation gripping of rough bar work. Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggressive first operation gripping of rough bar work. Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
2mm Range per Collets Sizes Up To 42mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available D677 Varibore square collets are to suit 60mm capacity collet chucks. Also known as M677, these collets have a 2mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D677 suit the following collet chucks- Klamp CRL60 Klamp QCRL60 Crawford CDC60 Crawford CDC-60-S Crawford QCD-60
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
2mm Range per Collets Sizes Up To 62mm Capacity Spiral Serration as Standard, Other Finishes Available Special Profiles Available D677 Varibore round collets are to suit 60mm capacity collet chucks. Also known as M677, these collets have a 2mm range. Supplied spiral serration as standard we can supply with alternate finishes and in special profiles. D677 suit the following collet chucks- Klamp CRL60 Klamp QCRL60 Crawford CDC60 Crawford CDC-60-S Crawford QCD-60
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
2mm Range per Collets Sizes Up To 52mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available D677 Varibore hexagon collets are to suit 60mm capacity collet chucks. Also known as M677, these collets have a 2mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D677 suit the following collet chucks- Klamp CRL60 Klamp QCRL60 Crawford CDC60 Crawford CDC-60-S Crawford QCD-60
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
2mm Range per Collets Sizes Up To 30mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available D673 Varibore square collets are to suit 42mm capacity collet chucks. Also known as M673, these collets have a 2mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D673 suit the following collet chucks- Klamp CRL42 Klamp QCRL42 Crawford CDC42 Crawford CDC-42-S Crawford QC-42
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
2mm Range per Collets Sizes Up To 42mm Capacity Spiral Serration as Standard, Other Finishes Available Special Profiles Available D673 Varibore round collets are to suit 42mm capacity collet chucks. Also known as M673, these collets have a 2mm range. Supplied spiral serration as standard we can supply with alternate finishes and in special profiles. D673 suit the following collet chucks: Klamp CRL42 Klamp QCRL42 Crawford CDC42 Crawford CDC-42-S Crawford QC-42
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
2mm Range per Collets Sizes Up To 36mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available D673 Varibore hex collets are to suit 42mm capacity collet chucks. Also known as M673, these collets have a 2mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D673 suit the following collet chucks- Klamp CRL42 Klamp QCRL42 Crawford CDC42 Crawford CDC-42-S Crawford QC-42
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Change collets in a matter of Seconds DCD collet changing gun are required for the changing of DC collets. The gun collapses the collet down so it can be placed into the collet and released into position.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quoteResults for
Power-tools - Import exportNumber of results
61 ProductsCountries
Company type