Results for
1ST MACHINE TOOL ACCESSORIES
United Kingdom
High Accuracy Taper and External Diameter Wide range of Sizes Available These reduction bushes allow for the fitting of boring bars and drills with a tapered shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggresive first operation gripping of rough bar work.Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Larger Bore to Accept Larger Components down the Spindle Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Industry Standard Large Bore 3 Jaw Chuck Kitagawa's chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. The BB series has a big bore to accept larger components down the Spindle. BB200A series chucks are supplied with a blank drawnut as standard with a set of T-nuts and an adaptor plate.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Larger Bore to Accept Larger Components down the Spindle Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Industry Standard Large Bore 3 Jaw Chuck Kitagawa's chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. The BB series has a big bore to accept larger components down the Spindle. BB200 series chucks are supplied with a blank drawnut as standard with a set of T-nuts.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Bites into the Component for more Secure Gripping Stops Push Back or Movement in Jaws Screws can be used to Adjust Grip Length Case Handened for Longevity Gripper jaws can be a great way of getting round part movement in roughing operations, this is by use of teeth in the jaw which bite into the material. This biting can also be a great way to get round problems using black bar or other rough material. The depth of the backstop on the jaw can be adjusted by using screws, these screws are ground and hardened to give you a good backstop for the component. 3086 and 3082 are for gripping bar and do not have the backstop inbuilt into the jaw.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Internal gripping single piece jaws to suit Kitgawa's SC, JN and JS Series chucks.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Quicker change over of jaws compared to standard single piece jaws Kitagawa's hard two piece jaws to suit JN series scroll chucks with tongue and groove moutning.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
External gripping single piece jaws to suit Kitgawa's SC, JN and JS Series chucks.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Hardened and Ground Supplied in sets of 3 Ground Serrations for Accurate Positioning of top Jaws Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear to the chuck body itself cannot be rectified.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Hardened and Ground Supplied in sets of 3 Ground Serrations for Accurate Positioning of top Jaws Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear to the chuck body itself cannot be rectified.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Hardened and Ground Supplied in sets of 3 Ground Serrations for Accurate Positioning of top Jaws Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear to the chuck body itself cannot be rectified.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Hardened and Ground Supplied in sets of 3 Ground Serrations for Accurate Positioning of top Jaws Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear to the chuck body itself cannot be rectified.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Bites into the Component for more Secure Gripping Stops Push Back or Movement in Jaws Screws can be used to Adjust Grip Length Case Handened for Longevity Gripper jaws can be a great way of getting round part movement in roughing operations, this is by use of teeth in the jaw which bite into the material. This biting can also be a great way to get round problems using black bar or other rough material. The depth of the backstop on the jaw can be adjusted by using screws, these screws are ground and hardened to give you a good backstop for the component.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Bites into the Component for more Secure Gripping Stops Push Back or Movement in Jaws Screws can be used to Adjust Grip Length Case Handened for Longevity Gripper jaws can be a great way of getting round part movement in roughing operations, this is by use of teeth in the jaw which bite into the material. This biting can also be a great way to get round problems using black bar or other rough material. The depth of the backstop on the jaw can be adjusted by using screws, these screws are ground and hardened to give you a good backstop for the component. 3087 and 3083 are for gripping bar and do not have the backstop inbuilt into the jaw.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
360 Degree Wrap Around for Distributing Force Evenly Wide range of Heights and Diameters More Lightweight to reduce Centrifugal Force Prevents tri-lobing in thin walled components Aluminium serrated pie jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Pie jaws creat a full wrap around to reduce the potential for marking and deformation.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Aluminium serrated soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Aluminium cross tennon soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Good Quality of of material allows for machining with a good finish.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 6 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 6 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 6 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 5 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 5 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quoteResults for
Boring - Import exportNumber of results
30 ProductsCountries
Company type