Results for
KNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer UV Fused Silica Lenses for Solid State Laser applications. UV FS is a prime choice for lenses in use with Solid State Lasers due to its consistently high transmission in the UV/VIS/NIR regions. This means that it can be used with a range of different laser types, such as Titanium-doped sapphire (tuneable to 660-1080nm) or Alexandrite (tuneable to 700-820nm) with very little change in performance. UV FS is comparable to N-BK7 or other similar optical glasses in its performance, having a very similar average transmission over the VIS range up to approximately 2000nm and a slightly lower refractive index. The Abbe constants of UV FS are also very similar to that of N-BK7, although slightly higher. Read PDF for full specification
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer UV Fused Silica Lenses for Colour Measurement Applications. Similarly to N-BK7, UV Fused Silica has a fairly consistent transmission across UV/VIS/NIR, meaning that that transmission in each region is almost equal. This in turn means that any image or measurement taken is not skewed towards one colour, and a more accurate measurement can be taken. This can be used in conjunction with an IR Cut Filter in cameras to remove a lot of the NIR noise giving a clearer image with better colour clarity/contrast. UV FS is comparable to N-BK7 or other similar optical glasses in its performance, having a very similar average transmission over the VIS range up to approximately 2000nm and a slightly lower refractive index. The Abbe constants of UV FS are also very similar to that of N-BK7, although slightly higher. Read PDF for full spec
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Ground Glass Diffusers for use within Photography. We supply a range of Ground Glass Diffusers for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within photography. Ground Glass Diffusers are used in to diffuse the flash from cameras to prevent photos with harsh light and hard shadows to soften and improve the appeal of the image. Diffusers are also used in lightning systems to prevent glare from computer screens, the manufacture of lightboxes for advertising, viewing x-rays, and other applications. For more information read PDF…
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer custom Rod Lenses for use within Optical Systems. We supply a range of custom & stock Rod lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Rod Lenses are a special variant of cylindrical lenses so they focus light to a line. Rod lenses have an outside face that is polished and the ends are ground. Typical uses for rod lenses would be to generate a line image from a circular laser beam. Rod lenses can be cut at 45 degrees for use in beam steering and other similar applications. For more information read PDF …..
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
KO can offer Metallic Neutral Density Filters for use in Photographic Applications. We supply a range of Metallic Neutral Density (ND) Filters for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specifications. What’s more, our Metallic ND Filters are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Our Metallic ND Filters reflect (with a metallic coating) light neutrally over a wavelength range (typically visual). They can be used to lower the intensity of light prior to the image plane. These are often used in photography, allowing photographers more flexibility with their setups to achieve desired effects. Often, an ND filter will be used in conjunction with a long exposure to prevent washed-out and overexposed images. They can also be used to add motion blur, reduce depth of field and to use a wider aperture. For more information read PDF…
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KNIGHT OPTICAL (UK) LTD
United Kingdom
These dispersing equilateral dispersing prisms have a very simple triangular cross section. Equilateral dispersion prisms are commonly used for wavelength separations, i.e. refracting white light into a rainbow pattern effect. Depending on the material used equilateral dispersion prisms can be used over a wide range of wavelengths. We offer UV Fused silica prisms for use in the ultra-violet wavelength from 170nm and other high index materials which are used for visible applications. Antireflective coatings are applied to most of our high index grade of equilateral dispersion prisms as high index material is sceptical to staining and corrosion which anti-reflective coatings eliminate. Antireflective coatings also help to improve output of the light as they prevent light loss due to surface reflection. The exit beam is in general at an angle to the input beam, this angle depending on the prism material, the wavelength and the incidence angle READ PDF FOR MORE INFO
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Meniscus Lenses for use within Optical Systems. We supply a range of Meniscus lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Any spherical surface will introduce spherical aberrations to an optical system. Meniscus lenses are designed with the curvatures of the lens in mind to minimise these spherical aberrations. This effect is more noticeable with higher index glasses as spherical aberrations increase with the change in index. Meniscus lenses can be an effective compromise on cost and aberration when compared to using aspheric lenses or multiple lens. Fore more information read the PDF….
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Cylindrical Lenses for use within Optical Systems. We supply a range of cylindrical lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with optical systems. Cylindrical lenses are designed to light to a straight line, rather than a point. Cylindrical lenses are often used to change the profile of laser beams, for example to correct for astigmatism and elliptic shape in diode lasers or to generate lines from single mode lasers. For more information read the PDF…
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer you stock and custom lambda/10 mirrors for use in imaging applications, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality images and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: •Enhanced aluminium 94%R for visible applications. •99.9% dielectric for laser use in visible applications. •UV aluminium for UV applications down to 180nm. •98.5% dielectric for laser use in the NIR applications. •Ion plated silver for NIR-2000nm applications. •Protected gold for 750nm to far infra-red applications Lambda/10 mirrors are used to produce a better quality signal from the mirror, resulting in a higher quality imaging. Read PDF for more information…
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer UV Fused Silica Windows for Vacuum Applications. UV Fused Silica is a relatively hard optical glass with a very low coefficient of thermal expansion. This means that it is a good choice for us in Vacuum applications, as any difference in temperature will not affect the optical performance. In addition to the above, UV FS has high transmission from UV to NIR meaning that there is little loss of image when it is used for a Vacuum Window/viewport and therefore the quality of the optical system is not compromised. All our UV Fused Silica Lenses are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptics Optispheric, and Starrett AV300 and Zygo Verifire XPZ. This allows us to work to the highest QA standards and meet the tolerance specifications on these precision components Read PDF for more info
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Amici Roof Prisms for use within Imaging Industry. We supply a range of Amici Roof Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Imaging Industry. Amici Roof Prisms are often used in the development of telescope eyepieces and endoscopes, where they revert and invert the image while redirecting the beam by 90 degrees. For more information read PDF …
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
The laser mirrors can be custom made to include the following range: 1 YAG laser mirrors (High power grade) 2 Excimer laser mirrors (High power grade) 3 Argon-ion laser mirrors (High power grade) 4 Diode & broadband (Ti:Sapphire) These mirrors are made from vacuum depositing thin films of material that have differing refractive indices & thickness onto suitable substrates. Typical custom laser mirror substrates are calcium fluoride, germanium, sapphire, fused silica and Zinc Selenide which produce a high efficiency reflecting surface at the laser wavelength. The coatings are assembled assuming that the mirror will be working in the plane of incidence. This is essential as any off-axis angles will push the pass band toward the shorter waveband that could be beyond the pass band for one or both polarizations (s and p). If off-axis reflections are needed, such as at 90°, then this coating needs to be applied for an Angle of Incidence (AOI) of 45°. READ PDF FOR MORE INFO ..
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer you stock and custom lambda/10 mirrors for use in Spectromters, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality signals and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: •Enhanced aluminium 94%R for visible applications. •99.9% dielectric for laser use in visible applications. •UV aluminium for UV applications down to 180nm. •98.5% dielectric for laser use in the NIR applications. •Ion plated silver for NIR-2000nm applications. •Protected gold for 750nm to far infra-red applications Lambda/10 mirrors are used to produce a better quality signal from the mirror, resulting in a higher quality result for transmission. Read PDF for full spec
Request for a quoteResults for
Silica - Import exportNumber of results
14 ProductsCountries
Company type