Self-tapping screw - Import export

No ponding or damming! The large base of the Dektite® Diverter dramatically reduces and diverts rainwater back up that can occur on very low or high pitched roofs and deep ribbed roofing profiles. No need to cut around pipes, just quick straight lines for the square base. Two edges of the Dektite Diverter feature our classic Dektite Aluminium strip, whilst the remaining edges are left bare to enable you to cut the width of the flashing to fit your application. Two additional Aluminium strips are supplied to cover the remaining two edges of the flashing, fix with self-tapping screws & silicone.

Product Features: • Sizes A to E are 20 gauge 0.036" thick steel. • Sizes F to J are 18 gauge 0.048" thick steel. • Self-tapping screws included. • ASA 61 grey baked powder paint.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Boards are not included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models are adaptable to a wide selection of Arduino's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Arduino boards are not included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models available for Beaglebone White, Black and Green. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Beaglebone boards are not included.

Product Features: • Ideally suited for mounting of printed circuit boards horizontally. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of three (3) lengths in five (5) colours. Stocked in black, grey, translucent clear, translucent smoke and translucent red. • Satin texture finish. • Cover is recessed for easy label installation. • Complete with lid and two self tapping screws (plated for grey and clear, black for all other colours). • Two (2) of four (4) P.C. board standoffs moulded into interior depending on enclosure size. • Designed to meet IP54.

Versatile and attractive boxes in ABS with a matt finish. Their rugged yet simple features make them unobtrusive and ideal for domestic, commercial and office applications. The lid is retained by 4 self tapping screws which can be inserted from either side and can be hidden by the matching plastic covers provided. Integral stand offs are provided in both halves of each box and PCB slots in AB77, AB78 and AB88. Standard colours are black and white but other RAL colours are available on request.

Product Features: • The Clipper Series is a British-designed hand held enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards for use in hand held applications. • Ergonomically styled for a secure and comfortable grip. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with top and bottom, removable front panel, battery door (except on the smallest size) and three self tapping screws. • The top panel has a flat display area, perfect for labels, silk screening, membrane keypads or easily machined. • The base is moulded with bosses for easy P.C. board mounting. • The removable end panel is securely clamped by the two box halves and easily customised or replaced by an infrared panel. • Battery compartment (except on the smallest size) suitable for a 9V (PP3) battery. Battery clip not included.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Front and rear panels are integral part of bottom unit. • Moulded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M4 x 0.7" (14mm) slotted machine screws (included) threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four M3 x 0.276" (7mm) self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the bottom is a smooth dark grey (RAL 7012)

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Attractively styled and ergonomically designed for use as a "hand-held" instrument enclosure. • Standard version is moulded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings. • Economy version is moulded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts. • Recessed top for membrane display or pad. • Lap joint construction provides protection against access of dust and splashing water. • Extra deep and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting installation.

Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.

Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. • Designed to meet IP54 ratings. • Recessed top for membrane display or pad. • Units with battery door use the long life "three snap" door. • Lap joint construction provides protection against dust accumulation and splashing water. • Moulded in a choice of black, grey or transparent blue general purpose ABS plastic with a satin texture. • Unit is secured with self tapping screws. • Black and transparent blue enclosures include black screws, grey includes nickel finish screws.

Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. • Designed to meet IP54 ratings. • Recessed top for membrane display or keypad. • Units with battery door use the long life "three snap" door. • Lap joint construction provides protection against dust accumulation and splashing water. • Moulded in a choice of black, grey or transparent blue general purpose ABS plastic with a satin texture. • Includes one or two aluminium end panels. • Unit is secured with self tapping screws. • Black and transparent blue enclosures include black screws, grey includes nickel finish screws.

Product Features: • The Bench Case is a British-designed plastic enclosure. • Ideally suited for mounting printed circuit boards for use in bench top applications. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with plastic top and bottom, removable aluminium front panel, four rubber self adhesive feet and four self tapping screws. • The top panel and bottom halves include a flat display area, perfect for labels or silk screening. • The base is moulded with six bosses for easy P.C. board mounting. • The removable 1.5mm thick aluminium end panel is securely clamped by the two box halves and easily customised. • Hole in rear of enclosure for easy cord access.

Product Features: • Ideally suited for mounting small printed circuit boards or used as potting boxes. • Moulded in a choice of black, grey or translucent blue general purpose ABS plastic. • Satin texture finish. • Complete with lid and two self tapping screws. • This series is also available with flanged lids. • Screws are colour matched to enclosure (nickel plated screws with grey enclosures and black plated with black enclosures). • 2 P.C. board standoffs moulded into interior. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Some sizes are available with a keyring kit. • Models with key ring kit are predrilled in the narrow side.

Product Features: • Ideally suited for dongles and/or mounting small printed circuit boards with USB connectors. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of three (3) lengths in five (5) colours. Stocked in black, grey, translucent clear, translucent smoke and translucent red. • Satin texture finish. • Cover is recessed for easy label installation. • Complete with lid and two self tapping screws (plated for grey and clear, black for all other colours). • Two (2) or four (4) P.C. board standoffs moulded into interior depending on enclosure size. • Designed to meet IP54. • USB connector is not included.

Product Features: • All steel, heavy duty construction designed to house heavy, heat producing items such as power supplies. • Bottom of unit is 16 gauge steel, top is 18 gauge steel. • Finished in a rugged beige powder coat. • Top half is of an upside down "U" shape design for easy removal, bottom half is also "U" shaped but includes a fold on all sides including front and back for extra strength and mounting of top case. • Top case section is heavily ventilated for excellent air circulation with an attractive slant (also doubles as a lifting area - both front and back). • Top lip extends 0.75" (19mm) on both sides adding 1.5" (38mm) to the total depth. • Bottom is solid except for 4 holes for mounting heavy duty rubber feet. • Includes nickel plated self-tapping screws and screw on 0.75" (19mm) high, rubber feet (1421T7).

Product Features: • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc, etc). • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components. • Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws). • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label. • Standoffs moulded in the interior of the lid and enclosure - designed for #4 x 1/4" self tapping screws (Part number 1555TS100). • Choice of two materials: • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) - Recommended for outdoor use • Colour is a light grey (RAL 7035) to help keep heat absorption down.

Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • "Styled" lid version has three main advantages over the flat lid (1555 Series) features below: • Smooth recessed surface on lid for a membrane keypad or label • Standoffs moulded in the interior of the lid (except for size "B"). Designed for #6 self tapping screws • More modern "styled" look V's the traditional flat lid (1555 Series). • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating. • Polycarbonate versions are UL 508A listed (File #E65324). • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water.

Product Features: • Heavy duty (0.1" thick) aluminium base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include four horizontal rows of louvers for ventilation. • Includes heavy duty (0.1" thick) aluminium raised mounting panel. Mounting surface includes 8 press nuts for mounting and a 5" (127mm) x 8.63" (219mm) area. • Front and back is recessed near the top with flange - to act as built in lifting handles. • Sold pre-assembled in a light textured - dark grey powder coat finish. • Comes with three cord grommets for front and rear holes and required assembly hardware. • Assembled with 8 self-tapping Philips head screws.