Moisture-resistant - Import export

Finsa Hidrofugo is a high quality Moisture Resistant MDF board that is becoming increasingly popular within the panel processing industry and, in particular, the Kitchen, Bedrom and Bathroom sector. Its unique production process involves high pressure pressing with the introduction of steam. This process ensures the board is more consistently dense throughout its entire thickness. Why is Hidrofugo Board so Popular Being denser than any other MR MDF on the market, the panels are are ideal for any application where machining of the face. and/or painting is involved. Its consistent density makes it perfect for the production of 3D decorative MDF panels , or applications such as painted Kitchen and Wardrobe doors. Is Hidrofugo Dimensionally Stable Absolutely. It’s ultra dense core makes it less resistant to cupping and bowing particularly when part of the face is machined away, when

Moisture resistant plasterboard Type H2 is made of special paper and gypsum core with water-repellent (hydrophobic) additives for protection against moisture. Application: • Ceiling • Walls • Areas with high levels of relative humidity, such as domestic kitchens, bathrooms, laundry rooms, etc. Ideal for indoor use in areas with increased humidity up to 70% for short periods of time Advantages: • Increased moisture resistance Type H2 • Sustains a healthy, moisture-controlled environment TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000 - 3000 8.80 60 pcs 15 1200 2000 13.00 50 pcs

As an online product, our Cut to Size then Primed MDF panels fairly unique. We take raw, un-primed, high quality, moisture resistant board, cut it, sand the edges, and then prime it. This process ensures the panels are fully primed all over, including the edges. Most of our competitors use a pre-primed MDF sheet that is cut to size after it has been primed. Naturally, this leaves an un-sanded, un-primed, raw edge. Whilst Factory Primed MDF has its place. and is suitable for some projects, it may not suit everyone’s needs. Almost all pre-primed MDF is produced using an average quality, moisture resistant, board. Our panels are superior as they cut from a high quality moisture resistant MDF. In addition, the edges are sanded and the panels primed all round. Each of our primed panels includes a single coat of water based primer to each side with two coats applied to each edge. The quality of the primer, and the amount of primer used, is superior to the factory applied option.

Our Factory Primed MDF Sheet cut to size can be used for a wide range of interior projects. It is very popular with kitchen and bedroom manufacturers for use in cabinet construction. The pre-primed, moisture resistant sheets are supplied to us with white UV primer on both sides. When coupled with our cut to size service, this product provides a time and cost saving compared to the un-primed alternative. Cut and Primed MDF vs Pre-Primed MDF Board Pre-Primed MDF Board is an ideal solution that is perfect for many projects and applications. Due to it’s exposed edges it is more suited to projects where the edges are not seen or are of low concern.

Moisture resistant MDF (MR MDF) is the most versatile of all the MDF products. It is perfect for high moisture areas such as bathrooms and kitchens and invaluable for painted MDF panel projects. Due to its resistance to moisture ingress, MR MDF is perfect for projects such… Skirting Boards Bathroom wall panelling. Kitchen Wall Panelling. Laminated or Painted kitchen cabinet doors. and any indoor environment where moisture may be a concern. In addition, we also recommend it for all DIY painted MDF projects as it is less prone to fibre lift when painted. Using this product will save you a lot time and preparation to achieve perfectly smooth edges.

Our standard edging solution is 2mm ABS colour matched to the board. The edging is available with a rounded (by default, see photo) or square edge detail. If you prefer to have the square option, please specify in the notes section. We can also offer the following panel edging options upon request… Black 1mm ABS panel edging (please specify in the notes section if you require this option) Black 1mm PVC edging (please specify in the notes section if you require this option) Contrasting coloured edging (please contact us via email or phone for this option) Metallic effect panel edging (please contact us via email or phone for this option) Wood effect panel edging (please contact us via email or phone for this option) Real wood panel edging (please contact us via email or phone for this option)

Not all MDF panel products are made equal, in fact there many varieties of MDF, each having its own specific purpose. Our White Moisture Resistant MDF board is specifically designed for use as a pre-finished board that can be used in areas that are prone to moisture or occasional wetting. This product features all the qualities of standard White Melamine faced board, easy to work with, easy to machine, clean cutting (when cut correctly) and the ability to take an edging. The obvious advantage is that it can be used in environments such as kitchens and bathrooms without the risk of swelling caused by the ingress of moisture. Our Moisture Resistant White Melamine Faced board is commonly used in the manufacture of permanent and mobile bars as well as “breakout areas” and office kitchen areas. Its inherent resistance to moisture provides a longevity and durability that standard MDF or Chipboard Mel

9mm Thickness. 2400mm x 390mm sheet size. Supplied in Moisture Resistant MDF. Can be painted with most types of paint. Priming recommended. Lead time around 1-7 working days.

Our moisture resistant Tongue & Groove and moisture resistant, pre primed, “Bead and Butt” effect MDF wall panels are perfect for decorative bathroom wall panelling. These panels are not suitable for shower enclosures however, if painted in a suitable paint (not emulsion) they are perfect for use in bathrooms, kitchens, utilities and other rooms around the home. Our T&G effect wall paneling is supplied in an un-primed MR MDF and is available, in three pitches. 100mm, 150mm and variable. The latter having random 75mm. 100mm and 150mm centres between the grooves. Perfect for bathroom wall panelling.

MDF Wide Slat Wall Panelling. 9mm Thickness. 68mm slats. 2400mm x 390mm sheet size. Supplied in Moisture Resistant MDF. Can be painted with most types of paint. Lead time around 1-7 working days.

30mm V Grooved MDF. Pack of 7. 9mm Thickness. 30mm Pitch. 1200mm x 300mm sheet size. Supplied in Moisture Resistant MDF. Can be painted with most types of paint. Lead time around 1-7 working days.

- Fully Primed MDF Board. - High quality Moisture Resistant MDF. - Edges sanded after cutting. - Primed all around (inc edges). - Water based primer. - One coat to each face. - Two coats to each edge. - Prompt, precise cutting. - Requires light sanding prior to top coat. - Delivery around 3-7 working days.

Our standard Ribbed MDF panels are available in two thicknesses, two sheet sizes and two orientations. Made from moisture Resistant MDF, these panels are perfect for painting. Order yours today for delivery within 7-10 working days. Take a look at our latest product that has been added to the Ribbed MDF range!

Simple online cut to size calculator (check below for instructions). Calculated to provide an equal space each side when cut. Pitch approximately 100mm. Made from high quality 9mm, Moisture resistant, MDF. Supplied pre-primed. MR MDF wall panel Dado rail & wall panelling adhesive available.

Our Moisture Resistant Wall Panelling Packs sit in the middle of our Basic, Better, Best approach to Shaker Wall panelling. Each of the MDF Strips is cut from good quality MR MDF and cut on a modern, semi-automated beam saw. This ensures clean cuts with zero edge chipping. Naturally, our Moisture Resistant wall panelling packs are suitable for high moisture areas such as Kitchen and Bathroom Shaker Panelling. However, MR MDF is also less prone to fibre lift and will require less edge sanding compared to standard MDF. This time saving benefit means you will need to put in a lot less effort into getting a great finish. This product’s reduced preparation time makes it perfect for all panelling projects, especially Wall Panelling for Bedrooms. To enhance your bedroom wall panels we also offer a range of dado rails and even wall panelling shelves.

Our Standard Fluted MDF are made to order here, in the UK, from a high quality Moisture Resistant MDF. Very popular with interior designers, property developers, architects and builder. Our Fluted panels are also becoming increasingly popular with home owners. Uses for our Fluted MDF includes, but is not limited to… Entrance features for high end apartment and hotel developments. Restaurant and bar feature walls. Restaurant and bar front cladding. Home cinema wall panelling. Modern kitchen island cladding panels. Decorative wall cladding for bedrooms & living rooms etc.

Looking to breathe some fresh life into your home? Then shaker style wall panelling could be just what you’re looking for. This trendy, easy-to-install panelling offers an affordable way to add a touch of character to your property in next to no time. The most popular option has to be Shaker Style MDF wall panels. It’s clean traditional lines will add a warm and homely feel to any home, old or new. Shaker style is a popular choice for living room, bedroom, and hallway wall panels but can be used in any room you wish. Many online wood wall panelling companies offer “MDF Wall Panelling “kits” however, the simplest, and most cost effective way to purchase Shaker Wall Panelling is to order pre-cut strips of Moisture Resistant MDF online. This open back wall panelling solution is easy to calculate, easy to fit and will add value and style to your home.

Our rebated wall panelling dado Rail has been created specifically to fit our MDF Shaker Style Wall Panelling. It comes pre grooved (rebated) on the rear so that it will sit on top of 6mm, 9mm or 12mm MDF Wall panelling kits and low cost, DIY wall panelling packs. If you are looking for a Tongue and Groove MDF wall panelling dado rail then please select 6mm or 9mm. For Bead and Butt MDF panels, please select the 9mm version. The Dado Rail is an exact reproduction moulding made to match one that was used in a Victorian house in Northamptonshire and is supplied in Moisture resistant MDF. Our Dado is easily painted however, it will require sanding prior to the usual two coats of primer/undercoat and two coats of top coat. If you intend to paint your wall paneling with emulsion, to match your walls, the MDF dado rail, and wall panelling, can be painted with the same paint without the need for primer/undercoat.

Produced, in-house, from a high quality 12mm moisture resistant MDF, our 30mm V Grooved MDF panel is just one example of our bespoke V-grooved MDF panel machining capabilities. Available “off the shelf” (made to order, un-primed, with a short, 5-7 working day, lead time), this design offers a unique, modern design that can be readily ordered in its natural, un-painted, un-sanded state in full sheets with either portrait (tall and thin with the grooves running top to bottom) or landscape, short & wide, with grooves running top to bottom. Naturally, either option can be rotated to accommodate horizontal grooved design applications. If you would like your panels cut to size, pre-primed (an online option) or prefinished in a particular spray finished colour, our in-house capabilities allows us to accommodate your request. Simply send us an email with your choice of colour, and/or size requirements, and we will get back to you with a quotation.

We believe we offer the widest range of Tongue and Groove Panelling and Cladding options available, cut to size, online. Our “standard” pitch (the distance from the bottom of one groove to the next) options include 75mm, 100mm, 150mm, and even a variable, random pitch option. If that does not suit your particular project, we can also provide bespoke, custom width, Tongue and Groove Cladding to suit your exact needs. Each of our of T&G Cladding panels is CNC routed, in-house, using high quality Moisture resistant MDF. This makes it easier to paint and resistant to moisture (not water). This makes it the perfect choice for wall cladding projects in kitchens, bathrooms, boot rooms and utility rooms. Bespoke Tongue and Groove Cladding As well as offering a custom pitch option, our in-house, CNC Routing capabilities also allow us to produce Bespoke Tongue and Groove Cladding options including, but not limited to the following…

Our broad range of MDF CNC routing and machining capabilities also includes the design and manufacture of bespoke, grooved MDF, panels. Available in a choice of panel thicknesses, groove widths, and depths, and pitch distance between grooves to suit your exact design requirements. Made from moisture resistant MDF these panels are ideal for painting in the paint, and colour, of your choice and are perfect for decorative feature walls, bar fronts, kitchen island panels and much more. Supplied in their machined finish the grooves will require sanding prior to painting however, we can, supply the panels pre-sanded and/or pre-primed. We can also spray finish the panels in any colour you wish. For additional information or a quote please get in touch.

Our Bespoke Fluted MDF panels are available in a variety of thicknesses. The flute depth, width and pitch can be tailored to suit your design preference or adjusted to accommodate your panel width, avoiding awkwardly positioned cuts. We can even machine your panels so that they meet perfectly on internal, or external corners. We only use the best quality moisture resistant MDF, this helps to ensure the best possible finish when painted. Supplied, as standard, raw and un-sanded, we can supply the panels pre-sanded or pre-sanded and pre-primed ready for you to paint. Our in-house spraying service also pre-finish the panels in any colour you desire, if required. If you would like to discuss your requirement and receive a quotation the please send us an email to info@cnccreations.co.uk and one of the team will get back to you as soon as possible.

One advantage of using a walnut melamine board is that it has the appearance of real wood, but it is more affordable and easier to maintain. It is also resistant to moisture and heat, making it suitable for use in a variety of applications, including kitchen countertops, cabinet doors, and shelving. When ordering a walnut melamine board that is cut to size, it is important to provide accurate measurements and ensure that the board will fit in the intended space.

FUGA HYDRO is a moisture resistant joint filler for manual skim coating and jointing with a joint tape of plasterboards in premises with high humidity. Application: • For filling and finishing joints between Moisture resistant plasterboard types H2, DFH2, Titan Board, or Blue Board • Suitable for complete skim coating • Application in premises with increased humidity Advantages: • High level of smoothness and smoothness of joints • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg • Mixing Ratio: ~2.8 l water / 5 kg • Coverage: ~ 16 m2 / 5 kg • Consumption: ~ 0.3 kg / m2 • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs • Pallet weight: 600kg

Made of high-tech paper and high density gypsum core, reinforced with glass fiber and hydrophobic additives for premium fire protection, moisture resistance, sound insulation and mechanical impacts. Application: • Ceiling • Wall • Areas with higher requirements for fire protection, sound insulation, moisture resistance and high levels of resistance to mechanical impacts (hotels, schools, hospitals, and other large commercial buildings) Ideal for indoor use in areas with normal humidity up to 90% Advantages: • Enhanced sound insulation performance • High density of gypsum core for better sound insulation and stability Type D • Increased resistance to high temperatures Type F • Highest class of moisture resistance - type H1 • Exceptional strength and durability - type R TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.

Blue Board Type GM DFH1IR is composed of hydrophobic gypsum core with special additives and bi envelope of blue glass matt, which provides superior strength and impact resistance. Application: In areas with higher requirements for fire protection, sound insulation, moisture resistance and high levels of robustness of mechanical impacts, such as public bathrooms, shower cabins, relax areas, SPA centers and premises with pools. Ideal for indoor use in areas with normal humidity up to 90% Advantages: • Increased resistance to high temperatures - type F • Highest class of moisture resistance - type H1 • Exceptional strength and durability - type R • Breathable - eliminates the need for a breathable membrane helping to reduce project costs TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000 11.50 40 pcs

Solarglide’s Aluminium Venetian Blinds provide the perfect sleek and stylish solution for yacht, ferry and cruise liner interiors. These boat blinds are ideal for ensuite bathrooms, cabins, galleys and restaurants, our Venetians really do tick all the boxes. Whilst not being complete blackout blinds, our Venetian boat blinds provide sunlight during the daylight hours and complete privacy at night times, making them a versatile option for wherever you need them. Our blinds are moisture resistant, as well as UV resistant and glare resistant to withstand the harshest of sea conditions, and are rigorously tested to ensure quality is at an absolute maximum. Child safe, beautifully crafted and manufactured in the UK, our Venetian blinds can be customised to your exact specifications including slat width, colour, and curvature which makes them perfect finishing touch for luxury yachts, superyachts, custom made barges and cruise ships alike.

Product Features: • All models impregnated with a moisture and fungus resistant varnish. • Lead length of 1.5" (+/- 0.13"). • Wound for low distributed capacity by using solenoid (single coil) windings. • Includes vinyl insulation cover. • Ambient temperature range -40°C to +105°C.

CemCloak Soffit Strip is a high performing multipurpose building board that’s sole design purpose is to provide external weather protection to a range of applications. CemCloak Soffit strips and Undercloak strips offer high levels of weather, moisture and fire resistance along with dimensional stability creating a superior board used to cover roof edges, reveals and other facade elements. It’s resistant to water, is a non combustible, UV stable and fully weatherproof even at freezing temperatures. This board has a smooth finish and can easily be painted creating an attractive, consistent look with longevity.