Miniature - Import export

A micro-miniature CMOS, 4 pad SMD TCXO in a 3.2 x 2.5 x 1.3mm package. Stability from ±1ppm -40°~+85°C. Frequency range from 8.192MHz to 40.0MHz. Supply voltage 1.8V, 2.5V, 3.0V & 3.3V. RoHS and REACH compliant. Low cost TCXO with short delivery lead time. A micro-miniature CMOS, 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. RoHS and REACH compliant. Frequency range: 8.192MHz to 40.0MHz Supply voltage: 1.8V, 2.5V, 3.0V & 3.3 Volts Frequency stability from ±1ppm over -40 to +85°C RoHS compliant.High spec with low cost. Quick delivery.

For use with ‘special’ small button head hook-on grease nipples. Fits nipples with a 10mm head. Thread 1/8” BSP Part No. MHOC1

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade, 5 Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 100V. • Referring to figures 1-9, if connection is not used - no pin will exist. 101D

Product Features: • Ideally suited for dongles and/or mounting small printed circuit boards with USB connectors. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of three (3) lengths in five (5) colours. Stocked in black, grey, translucent clear, translucent smoke and translucent red. • Satin texture finish. • Cover is recessed for easy label installation. • Complete with lid and two self tapping screws (plated for grey and clear, black for all other colours). • Two (2) or four (4) P.C. board standoffs moulded into interior depending on enclosure size. • Designed to meet IP54. • USB connector is not included.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 2 Watt (+/- 1.5 db, 300Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency rating. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 500 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 150 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), Pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies (except 107X). • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications. • Choice of vented or unvented. • Vented versions protection electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors). • Ideally suited for mounting of printed circuit boards. • Slots on the base of the enclosure allow for easy wall-mounting. • Knockout on the base can be removed with a screwdriver and used for wire entry. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of (4) square/rectangle sizes and (3) circles sizes. Stocked in black, grey, and white. • Satin texture finish. • Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required. • (4) P.C. board standoffs moulded into interior. • Designed to meet IP30.

Product Features: • Ideally suited for mounting small printed circuit boards or used as potting boxes. • Moulded in a choice of black, grey or translucent blue general purpose ABS plastic. • Satin texture finish. • Complete with lid and two self tapping screws. • This series is also available with flanged lids. • Screws are colour matched to enclosure (nickel plated screws with grey enclosures and black plated with black enclosures). • 2 P.C. board standoffs moulded into interior. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Some sizes are available with a keyring kit. • Models with key ring kit are predrilled in the narrow side.

oil-less rocking piston – ideal for laboratory, medical, dental, gas generation, beverage dispensing, and other applications where noise and long life are key requirements. JUN-AIR has introduced a new generation of compressors with few moving parts, which reduces the noise, vibrations as well as wear and tear. The reduced noise and vibration level makes it possible to place the compressor directly at the place of use. The noise level is approx. 65 dB(A).

The affordability of SingleTact standard force sensors makes them a great place to start. Measuring capacitance can be challenging so we advise that you use our electronics board to provide a convenient voltage output and a digital I²C interface. We have various combinations of sizes and pressure ranges, please select a sensor that meets your criteria. A handy Help Me Choose page can assist you with the selection.