Results for
CRANAGE EMC & SAFETY
United Kingdom
We have an extensive range of product safety tests available, all within one location. Our facilities include: -Drop testing -Tumble barrel testing -Comparative Tracking Index and Proof Tracking Index -Flammability, needle flame and glow wire -Mechanical testing -Electrical testing -EMF testing and surveys. Our product safety, EMC and environmental testing facilities are all in the same location, so we will not move your product around and will not need to outsource any testing. This means all of the engineers are aware of any projects and can work together on any issues, saving the manufacturer time. We have an extensive UKAS scope, giving manufacturers assurance of reliability, accuracy and reliability. Our UKAS scope can be seen on our website and we are continually reviewing and updating the standards that we can test to. Please get in touch with our team to discuss your product safety testing requirements
Request for a quoteCRANAGE EMC & SAFETY
United Kingdom
Cranage EMC and Safety is a UKAS accredited test house (No.1833). Using a UKAS lab for your testing gives manufacturers assurance of accurate, reliable and consistent test results. UKAS is the UK's Sole National Accreditation Body. We are proud of our UKAS accreditation and regularly review and update our already comprehensive UKAS scope. We offer a range of UKAS accredited testing, covering EMC, Safety, Energy Related and Mechanical testing, which can be seen on our website. If you cannot find the testing that you need, please discuss your requirements with us as we are always seeking to add to our already comprehensive UKAS scope. Get in touch with our team to discuss your UKAS accredited testing requirements.
Request for a quoteCRANAGE EMC & SAFETY
United Kingdom
In Canada and the USA, third-party certification of electrical products is mandatory by law. Cranage can manage your testing requirements with our partners to gain certification against International (IEC), American (UL) and Canadian (CSA) standards. The partnership advantage of working with Cranage EMC & Safety:- · Fully project managed service for Canadian, North American and CB product approvals · No need to send products away to be certified for these markets · Unlimited access to testing knowledge and compliance solutions · Factory audits and manufacturing process inspections to maintain certification · Working on your behalf with the certification lab · Local prices with excellent turnaround
Request for a quoteCRANAGE EMC & SAFETY
United Kingdom
In addition to our comprehensive testing facilities, we have a range of services available to our customers at Cranage EMC and Safety. We work with our wholly-owned, Irish subsidiary, Cranage Veritas to be able to offer a complete NRTL service- in conjunction with Met Labs. We are able to carry out testing for the American market, as well as the required factory inspections. Cranage is also a signatory of the ILAC MRA Scheme, meaning we can assist with certification for global markets such as Saudi Arabia and Australia. Together with Cranage Veritas, we can also offer a complete service for CE and UKCA marking. This includes pre-compliance and full evaluation, and completing document reviews to ensure compliance with the appropriate countries regulations. Visit our website for further details on the services that we offer and how we can help you get your product compliant for the relevant market around the world.
Request for a quoteCRANAGE EMC & SAFETY
United Kingdom
Environmental testing covers a wide range of pressures that your product may be subject to and we can simulate different climatic conditions to show weaknesses in design. Testing will allow you to demonstrate your product can be used in any conditions that it may be exposed to. Whether your product is for the food industry and will be exposed to high pressure cleaning, a light to be used outdoors or forms part of equipment that will be used in an environment where the ambient temperature is higher than in the UK, we can help. Some examples of tests are listed, but this is not an exhaustive list so please get in touch if you need to discuss your requirements: Water and Dust Ingress Salt Spray Shock and vibration Temperature and Humidity UV (Solar Radiation) simulation We are UKAS accredited for some environmental testing, giving manufacturers assurance of reliability, accuracy and consistency
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CRANAGE EMC & SAFETY
United Kingdom
Our calibration laboratory is set-up to perform measurements of impedance and insertion loss over the frequency range 20Hz to 500MHz with automated systems to offer cost-effective results. Products manufactured by Cranage EMC Technology Limited are also backed up by extensive calibration facilities for the measurement of inductance, capacitance, and resistance. Many of our products have been independently calibrated with UKAS traceability and this has served to verify our measurement results. LISN's, PLIP's and CDN's are initially supplied calibrated with results documented according to our calibration procedures. Annual re-calibration is also provided on a standard traceability basis. You would receive a bound calibration record for each product submitted with measurement results and details of procedures used. This service is quoted inclusive of return UK carriage cost and is offered on a 5 days turnaround.
Request for a quoteCRANAGE EMC & SAFETY
United Kingdom
As Great Britain has now left the EU, we are no longer a Notified Body for EMC and are now a UK Approved Body (No.2583). However, our wholly owned Irish subsidiary, Cranage Veritas, is a Notified Body against the 2014/30/EU EMC Directive. This means they have been designated by the EU to products for conformity before being placed on the market. Cranage Veritas can work with you to assist with CE marking, ensuring your product is compliant for the relevant directives.
Request for a quoteCRANAGE EMC & SAFETY
United Kingdom
Medical device testing is tightly regulated due to the potential severity of an EMC or Safety failure. The term 'medical device' covers a wide range of items and we have extensive experience in testing in this area, covering items such as prosthetic limbs, hospital beds, patient monitors, TENS machines, blood pressure monitors, to name just a few. We are UKAS accredited to test for the Medical standards IEC/EN 60601-1 and IEC/EN 60601-1-2, covering the basic safety and essential performance of medical electrical equipment. We are also UKAS accredited for the following specific medical standards: -IEC 60601-1-11 Particular requirements for medical electrical equipment and medical electrical systems in the home healthcare environment -IEC 60601-2-10 Particular requirements for the safety of nerve and muscle stimulators Using a UKAS accredited laboratory gives manufacturers assurance accuracy, reliability and consistency.
Request for a quoteSTAINLESS BAND LTD
United Kingdom
Stainless Band work with high technology industries. Our slitting and shearing services are available at 0.10mm - 3mm thickness and from 2.50mm wide. We can cut to length from 100mm long to 4000mm long. We provide a comprehensive temper rolling and edge dressing service including deburring round edge and straightening. We have in-house bobbin winding facilities on plastic bobbins or large wooden spools and can apply protective coatings to product if required. As will all Stainless Band products in-house testing takes place and material test certificates are supplied with every delivery. You are in safe hands with Stainless Band.
Request for a quoteResults for
Materials testing - Import exportNumber of results
10 ProductsCompany type