Safes - Import export

Designed for taking reliable thickness measurements in Zone 0 Explosive Atmospheres, the Cygnus 1 Ex is certified intrinsically safe to ATEX, IECEx, UKEX for Zone 0 and NRTL for Class 1, Division 1. The Cygnus 1 Ex boasts advanced data logging, manual measurement mode, features a large colour LCD display and offers 3 measuring modes for through-coat measurements and various materials - including heavily corroded metals.

LMK Thermosafe, world leaders in drum and container heating, manufacture a variety of products suited to heating 200L drums. Selection of the correct equipment is dependent on many factors including material type, required operating temperature and desired heating rates. LMK Thermosafe are pleased to assist customers in the selection of the correct equipment for their particular application. ATEX IECEx Certified Hazardous area solutions available. For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

ProxATEX ATEX/IECEx Certified Temperature Controller – New Patented High Current Hazardous Area Controller This ATEX and IECEx certified controller is ideal for use with our Thermosafe, Faratherm or InteliHeat FlexiPlus products and other heating equipment installed in potentially explosive atmospheres. The device features Near Field Communication (NFC) which allows operators and site managers to set the key parameters of the device quickly and easily using pre-programmed cards. Simply hold the credit card sized NFC cards close to the front of the controller and the settings are instantly updated. This also makes the controller “Covid-secure”! BF400 Power Controller – Low cost solution for most installations Uniquely designed for use with the THERMOSAFE and FARATHERM Induction Heaters. Open loop control that is simple to install and use, ideal for most applications where a drum needs to be maintained at an operational temperature for a period of time.

Base Heaters provide a direct heat to the underside of the vessel, and can help heat drums, cylinders, IBCs and even small pots of paint and mastic. They can be used on their own, or together with a side heater to boost heat-rates and ensure a full melt of solid products. FARATHERM Induction Base Heater - Provides heat to the base of steel or plastic 205L drums and smaller containers. May be used individually, or with other LMK Heating products Uses the same technology as the proven Thermosafe Induction Heater Suitable for use in Zone 1 & 2 rated hazardous areas (ATEX and IECEx Certified) DIGIHEAT Base Heater - Provides heat to the base of 210 litre drums and smaller containers. May be used on its own, or with other LMK Heating products. Digital indicating thermostat standard For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

For fast, efficient and safe drum heating - a great replacement for old inefficient and expensive steam ovens. Fully ATEX, IECEx and ETL (NA) certified. MELTS SOLIDS ¤ HEATS LIQUIDS ¤ TOTALLY SAFE Designed to heat 205L drums or smaller steel vessels. THERMOSAFE® is a proven alternative to multi-drum ovens and the solution to a host of process heating problems, even in Hazardous Areas SIMPLE SAFE EFFICIENT FAST CLEAN FLEXIBLE MAINTENANCE FREE T: +44 (0)1440 707141 E: sales@drumheating.com

In addition to a proper ventilation system, UV-FLOW germicidal ultraviolet (GUV) light fixtures inactivate microbes in an area’s upper environment, helping to prevent the spread of any airborne infection. Thanks to its unique design it is safe to operate 24/7 in occupied and crowded spaces. 4 highly efficient selective UV-C pure quartz lamps at 253.7 nm. • Pure mirror bright aluminium parabolic reflector • 360 Degree Beam Pattern • All materials used are tested to resist intense UVC radiation • Specific electronic ballast for UV-C ray lamps • Protected against dust and water (IP55) • CE trademark (LVD 73/23 – EMC 89/336 – MD 93/42) • Complies with the noise standards of Directive 2006/42/EC • Values measured according to UNI EN ISO 3746 • Non-detectable and non-transmissible vibration values • Suitable for class 1 installations – protected areas

Reliable, accurate and offering superior senstivity, repeatability and speed of response. The SDT-Ex is suitable for continuous measurement of trace moisture in industrial process gases. This 3 wire, 4-20 mA, loop powered dewpoint transmitter utilises the ultra high capacitance SHAW moisture sensing technology and is certified intrinsically safe to ATEX and IECEx standards. Suitable for use in hazardous areas using a signal isolator and ideal for hydrocarbon, petrochemical and hydrogen applications. The SHAW SDT-Ex incorporates the unique AutoCal function designed by SHAW, allowing users to ensure accuracy between laboratory calibrations. Fully self-contained within a robust housing, the stainless steel construction provides weatherproof protection to IP66 (NEMA 4X). The output is configurable in 5 different units and various dewpoint ranges are available covering an overall range from -100 °C to +20 °C (-148 °F to +68 °F) dewpoint with an accuracy of ±2 °C (±3.6 °F) dewpoint.

A hand held hygrometer suitable for a wide range of industries. Designed for quick, reliable spot check measurements of trace moisture in gases and dry compressed air. Utilising the proven SHAW ultra high capacitance aluminium oxide sensor, desiccant dry down head assembly and AutoCal function. The intuitive menu system allows simple operation of the instrument and can be viewed in 10 different languages, has real time graphing, screen shot features and selectable engineering units. The rechargeable lithium-ion battery provides over 150 hours of continuous operation on a full charge and the instrument is charged via USB or a plug type to suit your geographical location. Incorporating Bluetooth interfaces for connectivity and printing and advanced data logging with download to PC capability, up to 300,000 readings can be captured and displayed via USB. Suitable for use in hazardous environments, the SDHmini-Ex is certified intrinsically safe to ATEX, IECEx and UL standards,

Instruments for testing the quality of air in high pressure systems and cylinders.Contained in a tough, impact and weather resistant case. Results can be stored in the instruments memory and then downloaded onto a PC.

Our full range of medical waste incinerators, designed to provide efficient waste destruction, utilizing best available technologies and environmentally friendly processes. Our expertise is second to none in this sector. Burn rates from 30kg per hour to 500kg per hour. Custom Pollution Control Systems, Auto Loading and De-Ashing featuers optional. Can also be used as part of W2E solution.

t offers a unique programme of treatments that measure and adapt to your unique skin type and condition. The diamond wand tip delivers an exceptionally gentle, yet powerfully effective exfoliation to remove your skins outermost layers of dead cells. Your therapist will use the handset over the treatment area and, where necessary, target specific zones to reveal your new and improved complexion. The Diamond Elite® is chemical free, non-invasive yet achieves amazing results revealing younger, healthier looking skin from the very first treatment. Benefits include a reduction in the appearance of fine lines combating premature ageing and leaving you with a long term textural improvement. It can also help to address scars and blemishes.The skin’s appearance is further improved through increased collagen & elastin production as your body produces a new layer of skin. “Diamond Elite is the most advanced and intelligent diamond microdermabrasion system available.”