Machine tools - Import export

Automatic upstroking circular saw with NC Programmable Controls. Yilmaz SK450 Standard Details Designed for high-volume straight cutting of non-ferrous profiles 4 – 6 second cycle time* High precision servo motors accurate to ±0.05mm* 450mm TCT blade with 4 kW motor Servo-controlled infeed speed and saw blade stroke adjustment Horizontal and vertical pneumatic clamping of the workpiece for precise cutting Automatic retraction of stock material at end of cut to protect the surface from scratches Single or multi-bar** (bundle) cutting Computer-controlled blade lubrication system System shuts down automatically after cutting the required quantity Interlocked safety guards Windows-based industrial PC with 7’’ LCD colour touch screen HMI & USB cutting job input Internet connection possible for technical support Automatic feeder stroke from 5 – 600mm. Maximum cutting length 9990mm Automatic end of bar sensor *Depending on material **Extra-cost option

The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard

This Semi-Automatic Vertical Bandsaw is a large capacity machine that cuts aluminium, ferrous and non-ferrous materials.

The NCH plate saws are designed for quick and accurate cutting of bars and plates into strips of varying widths. This allows you to reduce inventories of cut-to-width stock and increase the flexibility of your sawing operation. Models are available in a wide range of sizes. High-productivity Automatic machines, with moving arc from 4 to 6 meters cutting length.

Bomar Ergonomic 275.230DG Standard Details: Heavy duty one-piece cast bow Precision control hydraulic downfeed Substantial vices, quick set lever operation Bow rotates 45-90-60° Easy to read mitre scale Carbide blade guide pads and rollers Heavy duty blade tensioning unit Heavy duty, 3 phase motor Re-circulating coolant pump Adjustable guide arm Heavy duty gear train Blade speed: 35 & 70 m/min 500mm length stop included

The Bomar Workline 410.280DGH is a semi-automatic mitre bandsaw and is an ideal basic model for the production of steel structures. The both-sided mitre cuts continuously adjustable within the 0–60° range, with a large, easy-to-read angular scale. This machine features also an easily movable clamping vice for mitre cuts and a full-stroke hydraulic vice with a tightening system. Bomar Workline 410.280DGH Standard Details: 2 way mitre – 60° right, 60° left Easy to read mitre scale DRO for mitre angle Long stroke hydraulic vice Powered bow raise Adjustable back off valve for optimising downfeed speed relative to material mass Control box mounted on swinging arm Simple, robust push button controls Variable blade speed 20 to 120m/min Dovetail sliding vice for mitre cutting 27mm blade width Bed height: 756mm

Karmetal OSA 300x380 PLC Technical Details: • PLC control panel • Heavy duty construction • Hydraulic vice • Mechanical top clamps • Inverter controlled blade speed 25 to 90m/min • Hydro mechanical blade tension • Fast approach • Adjustable hydraulic regulation of the bow descent rate • Inverter driven blade speed • Swarf conveyor • 1.4 metre roller conveyor

Heavy Duty Automatic Bandsaw for solid bar, bundles & general sawing with the following features: Vice feed automatic with encoder for precision length set Twin hydraulic vices clamp both sides of material Simple input of component length and number of pieces via touch screen Steplessly variable blade speed 17 ~ 67m/mm Hydraulic blade tension control for optimum blade life. Variable downfeed control. The touch sensitive control screen provides easy selection of precise bar length requirement for a precise cut off length. The auto head-elevation reduces index cycling time significantly. The Blade speed is set and adjusted by acting on the touch sensitive control screen. There are quick-adjusting carbide saw-band guides, there is an idle wheel motion protector, a hydraulic band tension control, a quick-action HYDRAULIC twin-vice (split vice) 3-jaw clamping, a unique two-way vice jaw and an automatic chip conveyor.

InS/H1 approved cleaning and preservation oils with very good lubrication characteristics and surface wetting properties for the lubrication of disc-cutting systems in the paper and corrugating industry. The oils dissolve glue and paper fibre deposits.

Cleaning and maintenance of a machine is essential for long and reliable operation. LUBCON has a wide product range of cleaning agents and solvents for industrial uses as well as for application in the food and packaging sector. Whether industrial, biodegradable cleaners or a sugar-dissolving lubricant for clean and residue-free surfaces, we have the solution for almost every application.

High quality, fully synthetic cutting oil for cutting, milling and drilling of all FE and NE metals. It offers very good corrosion and wear protection and can be utilized for high cutting speeds and long service life.

Lubcon offers an assortment of customised solutions, specially designed for the lubrication of high speed spindle bearings. Our high performance greases feature an optimum base oil viscosity and mechanical thickener stability. These products meet the demanding requirements in modern high-precision machine tools with speed factors of up to 3 Mio. n x dm.

Our CNC Pipe Bender CH series is the backbone of our tube and profile bending machines. Their rigidity, stability and untouchable precision in exceptional conditions such as humidity or harsh temperatures is what makes them stand out from the crowd. Ranging from 6mm up to 420mm OD these pipe bending machines are adapt for use in a wide range of pipe manufacturing sectors and industries. The range includes the fully CNC pipe bender version, for wich all three axis are automatic in a single stack machine. There’s also the option to add welding detection, punching/cutting mechanisms and integrated loading and unloading systems if necessary. The CH series tube bending machine come equipped with the AMOB NC touchscreen easy-to-operate controls, or in the CNC version, the latest user-friendly AMOB 3D bending software. So, this stores tooling configuration, allows spring-back compensation and boasts anti-collision technology, amongst other features.

The AMOB Fully Electric CNC Tube Bender eMOB series features state-of-the-art bending technology, processing tube from ø6mm up to ø225mm and have multi-stack capability. Our fully electric CNC tube bending machines can bend both fixed and variable radii within the same cycle, and allow bending with no straight between them. A carriage booster allows bends with radii as tight as 1D, and consequently eliminates clamping marks. These fully electric CNC pipe benders, the eMOB series machines, are all equipped with the newly updated and user-friendly AMOB 3D SOFTWARE. Amongst other features it also allows automatic spring-back compensation, as well as ‘in cycle’ correction, stores tooling configuration and positions storage, runs anti-collision and interpolates all 9 axis.

AMOB Tube End Forming Machine can manipulate up to ø150mm tube and pipe. They cover a wide range of diameters and applications. With single, to three station tube end formers, along with the ability to integrate additional punching stations, AMOB can cater for any application with our in-house custom design and manufacturing abilities. With a small compact operating area, this tube forming machine be easily integrated within an automatic production cell. These fully hydraulic machines enable consistency, reliability, and fast production cycle times, and can be easily attached to a wide range of systems.

AMOB CNC Roll Bender provide outstanding production cycle times, un-matched reliability and also the production of products not possible on lower level machines. These CNC Roll Bending Machines markedly are the first machines in AMOB’s profile section range that are fully computer-controlled. In effect, this technology allows for producing elliptical shapes on a large scale with unbeatable repeatability. The CNC Profile Bending Machines range is able to put multiple radiuses into a single profile using both progressive and direct pressure. Opening up a new sector for product manufacture. The user-friendly 2D CNC controls make this series a popular choice. They are popular for profile bending sub-contractors, aluminium window and door producers, along with greenhouse manufacturers and also other similar industries. The MAH CNC series takes profile bending to the next level and allows the production of products that is just not possible on MAH and MAM series section bender machines.

AMOB Angle Rolls support the largest capacity profile bending machines in the world! With planetary moving bottom rolls, they can achieve faster, tighter bending with fewer passes, which results in reduced cycle times. The angle bending machinery range is available in both CNC and NC with AMOB’s specially developed auto learning software, which removes the need to do sacrificial test bends and therefore reduces scrap material and wasted production time. If bending the largest profiles is a requirement, then look no further than the MAH-AC Beam Roller from AMOB.

AMOB has specifically designed their boiler tube bending machines to meet manufacturing necessities. We apply our technology and knowledge to respond to the manufacturing demands. Specifically for boiler tubes, superheating coils, water wall panels and economising coils. Our CNC Boiler Tube Bender takes tube boiler bending to its highest level, and when 1D CLR bending is required, or wall thinning is critical. AMOB has the most efficient and innovative solution for producing extra-tight radius bends with minimal deformation. When we use the booster device, in conjunction with a fully hydraulic CNC bending machine, we enable precision parts replication with minimal process times as well as removing the possibility of human error. AMOB is at the forefront of the market in terms of minimal elongation and deformation percentages. These machines have a capacity of up to ø420mm.

AMOB’s Electric NC Tube Bender MDH Series is our basic, or entry level range. Simplicity, strength, and accuracy are the key features of this line. Ideal for prototyping, or for smaller to medium output projects. The MDH Electric Tube Bender is easily adapted to a vast array of industrial and non-industrial applications. Covering a range from ø6mm up to ø90mm, these versatile bending machines are an easy and obvious choice for those starting up a tube bending business. However, our MDH tube benders are also able to complement heavy production or prototyping divisions. As standard, this electric tube bending machine comes with a hydraulic mandrel extractor, hydraulic clamp, and pressure die, and as a result it guarantees a good-quality bend finish. Available in two versions, NC1 axis control and NC2 axis control, these tube bending machines allow for bending complex tube geometries with only seconds of programming.

AMOB Right and Left Fully Electric CNC Tube Bender from the eMOB series features state-of-the-art bending technology, processing tube from 6mm up to 42mm OD and have multi-stack capability. Machines are divided in two different concepts. The eMOB 2Bend series that changes bending direction by means of a rotative head, and eMOB LR Series that positions automatically and in cycle in a right and left bending configuration. Our Right and Left Fully Electric CNC Tube Bending Machines can bend fixed and variable radii within the same cycle and allow bending with no straight between them. A carriage booster allows bends with radii as tight as 1D and consequently eliminates clamping marks. The right and left fully electric CNC pipe bender from the eMOB series of machines are all equipped with the newly updated user-friendly AMOB 3D software.

Gidrolast got its start in building rugged hydraulic cylinders for use on heavy trucks in the waste management industry way back in 1994. That means we know first-hand what is required to build cylinders that will tough it out in this industry. So whether the cylinder is operating the gate on a garbage truck or the grapple in a scrap metal yard, the compactor on a scrap baler or lifting the blade of a bulldozer in a land fill site, Gidrolast cylinders are built to last. Both OEMs and end users around the world appreciate the rugged reliability built into each of our cylinders. Careful, experienced design is combined with high-quality manufacturing to make our Gidrolast hydraulic cylinders the cylinders of choice in waste management and recycling equipment. It’s not hard to see why tough, reliable cylinders are required in the waste management and recycling industry, as these pictures clearly testify. Hydraulic cylinders are shown in action in a scrap metal yard above.

In the world of scrap metal processing, equipment value and capability are essential to a good profitable business, and the Raptor 600 delivers on both counts. A mobile or static shear/baler that’s perfectly sized for cost conscious operators. Bronzed Lined Shear Head & 80mm Bronzed Lined Hinges… Hinges are positioned On-Top of box instead of on the bottom where dirt and debris collect…

Choice of 0.457mm or 10.00mm thick cliché plates. Suitable for use on both open and sealed cup pad-printing machines. Advantages of using 0.457mm thin pad printing plates * Less dependent on a clean air environment, considerably more durable and less easily damaged than softer photopolymer plates. * Have accurately controlled etch depths adjusted to suit all requirements * Hard wearing and more resistant to scratching than photopolymer plates * Can be effectively screened * Can be punched with holes to accommodate pin registration requirements ** Click to know more **

Quickest & easiest to set up on press Precision engraved to depth of 1.00mm (or more if required) Brass cylinders make most efficient use of heat conductivity when compared with other current hot foil tooling options Cylinders are temperature compensated across and along web for precise registration Rotary brass foiling dies are environmentally friendly, produced without chemicals from 100% recyclable brass and using pure machining processes Cylinders are produced for all manufacturers rotary hot foiling units Precision engraved tooling for ease of use and peace of mind when it matters most. ** Click to know more **

Rotary embossing dies manufactured from steel or a combination of brass and steel. Male and female embossing die sets produce multi-level images of highest quality and finest detail. Precision engraved or chemically etched to a depth carefully calculated to achieve the desired result. Cross web guide discs together with anti-backlash and adjustable gears ensure accurate registration both across and along the web. For less detailed images, more economic single male or female embossing dies used in conjunction with a hard rubber coated anvil may well achieve the desired result. Embossing dies are produced to run in both dedicated embossing units or an available cutter station. ** Click to know more **

UniFlex® Foiling Plates for Magnetic Rotary and Semi-Rotary Hot Foiling Stations The image is chemically etched into the copper faced steel and sleeves are priced on area not complexity. Economically priced tooling making the foiling of small quantities a viable option. Typically weighing less than 0.5kg, the plates are easy to handle and very economic to transport with customers benefiting from reduced freight costs. UniFlex® plates are the least labour intensive product when it comes to production and this is reflected in the price. The image is produced by chemically deep etching the copper faced steel. Copper is used because it deep etches so well and is much harder. ** Click to know more **

Designed to fit into most foiling units, the Foilring foiling system utilises an aluminium mandrel which is considerably lighter than both brass and magnetic foiling dies making them easy to handle and reducing freight costs. Unlike other hot foiling systems that require a dedicated mandrel for each repeat length, a single Foilring mandrel can cover a 5” repeat range (19” – 24” for example). End adaptors in mandrels for oil heated foiling units remain in place at all times reducing set up time for press operators. Rings or sleeves are produced just wide enough to accommodate the engraved images significantly reducing costs. Foilring hot foiling rings and sleeves are precision engraved to depth of 1.00mm (or more if required) and have exactly the same accuracy as engraved brass hot foiling dies. For customers that require bearers, Foilring mandrels are supplied with bearers that are located at the edge of the cylinder. ** Click to know more **

Produced in a range of material thicknesses: 1.6mm, 2.00mm, 3.00mm, 5.00mm & 1/4" Harder and more resilient than magnesium or zinc dies Precisely etched fine detail Copper blocking dies create the most upright images and this, together with superior heat transference, results in the highest quality foiled images Perfect for longer running orders Can be used for foiling a range of materials e.g. plastic, paper, card, leather etc A finished product with sharp clean lines and upright profile to create the perfect product ** Click to know more **

Flat embossing and debossing dies and marking stamps and rings Male & Female embossing dies produced in copper, brass or steel with single level and multilevel options creating greater opportunities for special effects Marking Stamps & Rings Steel marking stamps and rings manufactured and engraved to customers specifications Customer supplied blank stamps and rings also engraved ** Click to know more **