Heating - Import export

We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger

Knight Optical can offer UV Fused Silica Lenses for Flame Detection Applications. UV Fused Silica can be used in Flame Detection Applications, due to its high transmission into the NIR range (approximately <92% avg 400-2000nm) meaning that a clear distinction can be made between different wavelengths of light. UV FS also has a very low coefficient of thermal expansion 0.55x10-6K-1 at 300K) compared to N-BK7 (7.1x10-6K-1), meaning that it can still provide optical performance under high temperature. UV FS also has a high melting point compared to N-BK7, providing further protection for your application in high temperature environments. UV FS is comparable to N-BK7 or other similar optical glasses in its performance, having a very similar average transmission over the VIS range up to approximately 2000nm and a slightly lower refractive index. The Abbe constants of UV FS are also very similar to that of N-BK7, although slightly higher. Read PDF for more info

Knight Optical can offer infra-red interference Shortpass filters for use in Heat Shielding. We supply a range of infra-red interference Shortpass filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Shielding. Infra-red interference Shortpass filters are designed to transmit wavelengths shorter than the “cut-off” of the filter and to block bands above that. In many systems that require heat shielding while still needing visibility a shortpass filter can be used. These can attenuate infrared radiation and allow through visible light, which allows your temperature sensitive equipment to be visible. They can also be paired with a longpass filter to make a bandpass filters. Read PDF for more Information…..

Knight Optical has successfully launched a range of Stock Optical Domes for use in Pyronometers. Pyranometer/pyrgeometer are used for measuring solar irradiance. Typical applications being to understand where insulation needs to be within a building, climate studies and solar monitoring systems. A dome is essentially a window that has two parallel curves faces. Domes are used to shield the thermopile/ sensor used for making the measurements within a Pyranometer. Our domes are polished to high standards having good form error and high clarity with excellent transmission in the UV, NIR and FarIR spectrums allowing for accurate measurement. Capabilities: Domes are readily mountable, optically clear and manufactured to a high standard. Available from 5mm to 200mm in diameter and 0.25 to 10mm in thickness offering high transmission and extreme toughness for harsh environments. For more information read PDF

The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood drift eliminators designed for forced draft. Fully enclosed and protected from direct sunlight. Fan unit driven by a variable speed drive. Controlled operation of condenser unit fans. Safe and reliable operation for rental applications. Ease of transportation, handing and protection. Reduces drift to a rate significantly lower than that required by law. Increases safety with respect to microbial growth. Regulates fan speed proportional to sump temperature. Maximises efficiency, minimises noise and prevents overcondensation when coupled with water-cooled chillers.

Our efficient 500 kW boilers use an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint they deliver maximum heat output, with pressures up to 10 bar and temperatures up to 90ºC. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand

Our latest 250 kW boilers are extremely efficient, using an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint we’ll deliver maximum heat output, with temperatures up to 90ºC and pressures up to 10 bar. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand functionality

The 250 kW refrigerator heat pump chiller offers efficient cooling with the added benefit of heating, for the ultimate flexibility from a compact footprint. Powerful fan allows many lengths of flexible ducting. 24 hour running fuel tank for independent use. Can be internally or remotely thermostatically controlled. Our 250 kW heat pump chiller provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be run with an external thermostat to save on fuel. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Our industrial 9 kW electric heater has a powerful motor producing an efficient air flow. It features a compact chassis for easy placement within confined areas and allows the user to easily change air distribution, heat and air flow. Powerful, compact unit producing an efficient air flow. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Ideal for placement within confined areas. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

Our industrial 18 kW electric heater is quick and easy to install and operate. The unit has two fan speeds which allows for optimum performance under most site applications. Quick and easy to install and operate. Machine can be set at 4.5-9-18 kW. Fans can be regulated to operate at both half and full speed. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Optimum performance under most site applications. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

Our industrial 36 kW electric heater is capable of heating very large spaces. It provides a very quiet and convenient solution and can be placed indoors or outdoors. The heater can be easily connected to an existing ventilation system. Portable and quiet unit. The unit has three power settings and two fan speeds. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Can be easily connected to an existing ventilation system. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Capable of heating very large spaces, indoors or outdoors. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.

Our 42 kW heavy-duty, industrial electric heaters will keep your operations running and your projects on track. From heating a temporary venue, to drying out a building - discover how our electric heater hire packages can help. Tough, portable design. Easy to manoeuvre with heavy duty castor wheels, fork pockets and lift eye points. Remote thermostatic control if required. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Our 45 kW commercial electric heaters have a high specification to allow accurate temperature control on any heating project. From heating a temporary venue, to drying out a building - our heater hire packages can help. Tough design for rental applications. Digital display makes it easy to control heat levels. Portable with heavy duty castor wheels, fork pockets and lift eye points. Can be internally or remotely thermostatically controlled. Provides precision control of temperature settings. Ideal for both indoor and outdoor industrial applications. Can be used for either largescale or localised temporary heating. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Our 65 kW diesel space heater is the smallest of the IDF range, offering versatile heating for your next project. From heating a temporary venue, to drying out a building - our heater hire packages can help. Fully fume-free with no additional moisture. Best quality fuel filtering ensures trouble-free running. Internal fuel tank allows for independent use. Dual voltage and can run off 110 and 240 volts. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be run with an external thermostat to save on fuel. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Keep your projects on track and your operations running with our 350 kW diesel hire service. From heating a temporary venue, to drying out a building - our indirect diesel heater hire packages can help. The largest of the Aggreko heater fleet. Incorporates the latest heat controls and frequency slow-start. Can be switched down to a lesser heat output if required. High flow and low noise make for an excellent all-round heater. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be run with an external thermostat to save on fuel. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Hire heaters and keep your operations running and your projects on track with our 200 kW IDF space heaters. From heating a temporary venue, to drying out a damp building - our heater hire packages can help. The 200 kW heater is designed for areas that require a good heat/flow with low background noise. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be run with an external thermostat to save on fuel. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Our 125 kW indirect diesel space heater hire service helps you meet your project deadlines - hassle-free. From drying out a building to heating a temporary venue - our IDF heater hire packages can help. Powerful fan allows many lengths of flexible ducting. 24 hour running fuel tank for independent use. Can be internally or remotely thermostatically controlled. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be run with an external thermostat to save on fuel. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Heatshrink Tubing & Sleeving is a popular choice of product due to its shrinking ability, allowing the material to constrict around whatever is placed in between. Often used inside Electronics industries with cables and wires, Heatshrink is perfect for repairing a faulty connection quickly and easily. Also available in caps, these are excellent for sealing off the end of an application, whether it is a wire or piece of tubing. For our full selection of Heatshrink product please see our website where you can request samples, view sizes, prices and even talk to our expert support.

For fast, efficient and safe drum heating - a great replacement for old inefficient and expensive steam ovens. Fully ATEX, IECEx and ETL (NA) certified. MELTS SOLIDS ¤ HEATS LIQUIDS ¤ TOTALLY SAFE Designed to heat 205L drums or smaller steel vessels. THERMOSAFE® is a proven alternative to multi-drum ovens and the solution to a host of process heating problems, even in Hazardous Areas SIMPLE SAFE EFFICIENT FAST CLEAN FLEXIBLE MAINTENANCE FREE T: +44 (0)1440 707141 E: sales@drumheating.com

For everything from pipeline valves to 10,000L agro-chemical containers. LMK Thermosafe Ltd manufacture a wide range of drum and container heating products used in process industries world-wide, including Flexible Heating Jackets in a variety of sizes, materials, power levels and voltages. Custom size Flexible Heating Jacket The Flexible Heating Jackets are so versatile that they can be specifically tailored to fit a multitude of different containers suitable for virtually any size and specifications. This bespoke service offers ideal solutions for customers requiring non-standard containers to be heated as rapidly as possible and efficiently insulated. However big or small the application, our development team based at our UK headquarters can adapt tried and tested designs to produce the best results. A wide standard range is also available from stock to fit 25, 50, 100 or 205 litre drums as well as 1000 litre IBC containers, totes and gas cylinder applications.

Multiple stock sizes from 25L to 1000L, with custom designs also available. The Standard range - Ideal for gently heating and maintain a temperature up to approximately 40-45°C. The HiHeat range - Provides a boost in power for applications needing a faster heat-rate up to approximately 60-70°C. The High Power range - Maximum power and maximum insulation - 0-160° Thermostat available. For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

Base Heaters provide a direct heat to the underside of the vessel, and can help heat drums, cylinders, IBCs and even small pots of paint and mastic. They can be used on their own, or together with a side heater to boost heat-rates and ensure a full melt of solid products. FARATHERM Induction Base Heater - Provides heat to the base of steel or plastic 205L drums and smaller containers. May be used individually, or with other LMK Heating products Uses the same technology as the proven Thermosafe Induction Heater Suitable for use in Zone 1 & 2 rated hazardous areas (ATEX and IECEx Certified) DIGIHEAT Base Heater - Provides heat to the base of 210 litre drums and smaller containers. May be used on its own, or with other LMK Heating products. Digital indicating thermostat standard For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

LMK Thermosafe, world leaders in drum and container heating, manufacture a variety of products suited to heating 200L drums. Selection of the correct equipment is dependent on many factors including material type, required operating temperature and desired heating rates. LMK Thermosafe are pleased to assist customers in the selection of the correct equipment for their particular application. ATEX IECEx Certified Hazardous area solutions available. For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

IBC Flexible Heating Jackets Tried and tested the World over, our Flexible Heating Jackets simply wrap around the tank, clip together and the thermostat can be set to the desired temperature. Single-circuit ‘IBC1’ model - For gentle warming - Avoid winter freezing - Reduce viscosity. Dual-circuit ‘IBC2’ model - Ideal for customers requiring liquids to be heated rapidly and as evenly as possible - Two high power heating circuits enable the top and bottom of each jacket to be separately controlled with integrated thermostats. Triple-circuit ‘IBC3’ model - For customers looking for maximum power - Three high power heating circuits enable the top, middle and bottom of each jacket to be separately controlled with integrated thermostats. IBC INTELIHEAT Flexiplus Heating Jackets - ATEX and IECEx Zone 1, 2, 21 and 22 certified (temperature classifications T4 and T3 rated) - for safe controlled heating in Hazardous areas. T: +44 (0)1440 707141 E: sales@drumheating.com

Use as standard Dektite®, or when retrofit is required, cut and fit around pipe and join with clips (supplied) Ideal for HVAC installations where you may need to retrofit the flashing (ie cut to fit over the pipe and reseal) This product is 2 in 1, the Swiss Army Knife of HVAC flashings - Available to cover sizes up to 760mm pipe diameter. Available in Black & Grey EPDM and Red High Temperature Silicone.

The Star HM range are bag sealers designed for lighter gauges of materials. The impulse sealers are capable of sealing up to 250 µm (1000g). There is also a constant heat machine for laminates and complex materials. Both hand and foot operated machines are finished in painted mild steel. A stainless steel food shop counter top bag sealer and tube sealer are also available. The robust construction allows for years of service with a full spares and service back up. Removable sealing bars allow for ease of maintenance and replacement of consumable items.

The Star 56 range of bag sealers consists of a power pack and a set of sealing jaws designed for heat sealing products in situ or for a bag sealer to be incorporated into a parent machine. The range of sealing heads is ideal for uses such as sealing valve sacks, foil or plastic machinery covers and sealing straps onto bulk bags. We also produce a range for sealing dangerous/ toxic products where the seal incorporates a cut so no product can escape. Seal cycle initiation can be via foot switch, push button or automatic (when the jaws are closed). The power pack is connected to the jaws by a lead, allowing the jaws to be used in awkward positions. Adjustable weld and cool timers control the sealing cycle, allowing them to be used on most materials. The indicator lights on the power pack or sealing jaws advise the operator when the weld and cool cycle are complete. Special sealing heads producing shaped welds can be made for almost any application.

The Star Platen Sealer is available either bench-mounted or free-standing, producing shaped or multiple welds. The Star Platen Sealer can be manually or pneumatically operated with either foot switch or push button operation. The Star Platen Sealer can seal most modern plastic, biodegradable, foil, paper and laminate packaging materials and is constructed from anodised aluminium profile to give rigidity whilst keeping the weight down. The Star Platen Sealer is available with: A variety of seal shapes, sizes and widths Multiple seals can be produced at the same time Automatic cutter for a straight or shaped cut out A variety of jaw openings dependant on application Interchangeable sealing heads for different welds from the same machine Either one or both jaws heated A range of control options are available including the ARTICS and MkVI C controllers

The Star Medical sealers have been developed for applications where ease of cleaning is critical, such as in the food, medical and pharmaceutical industries. The machine body can be built in a number of different designs with the jaws operating vertically (when a product is best sealed laying down) or horizontally (when a product is best sealed standing up). With the cylinders moving the top jaw directly, jaw alignment and pressure are much more controllable. This machine design is available with all the Star controllers. The Star Medical Vacuum sealer allows for the air to be removed from a bag prior to sealing. The machine is available with a range of vacuum pumps or vacuum generators dependant on your application. Gas flushing is available for modified atmosphere packaging. This machine design is available with either our ARTICS or Medical controllers.