Floor panels - Import export

Floorsorba Triple acoustic flooring panels are primarily designed to reduce both airborne, as well as impact sound in multiple dwellings. Their minimal thickness is ideal when reducing the noise in new build as well as refurbishment projects. Installation is simple and easy as the acoustic panels are just laid on the existing floors. This ease of installation means that the project can be completed very quickly hence minimising the disruption caused to occupants. Acoustic Performance Installation Floorsorba Tripe acoustic flooring panels are laid, or even better glue bonded to the floor. The normal method is to fit the panels in a staggered brick bond pattern and ensure that the edge joints and perimeter joints are buttered together tightly. All joints should be sealed with Barriersorba tape. As the Floorsorba Triple panels are approximately 12mm thick, it would be wise to fit 6mm thicks x 25-30mm wide timber batten around the perimeter of the room. The carpet grippers can then...

EABASSOC Foaming Agent is a concentrated foaming agent with low dosage rate of 0. 3 - 1.0 litre per m3 of foamed concrete, depending upon the density of the foamed concrete and mineral content of water used to dilute the foaming agent. An EABASSOC Foam Generator (or similar) is required to produce the foam. Foamed concrete, also known as cellular lightweight concrete (CLC) can be made with a density of 400 - 1600 kg/3 and compressive strength of 1 - 15 MPa. Foamed concrete can be used for many applications, such as: * pre-cast blocks and panels * in-situ panels * roof insulation * floor screeds and raising floor levels * planned and emergency void filling * road sub-bases * bridge repair, strengthening and abutments * trench reinstatement * soil stabilisation * land reclamation For more information please contact us.

The TCL SMARTStart System uses solid state components to control the current though the starter to provide a more progressive increase in current (soft start). This greatly reduces the stresses on the starter motor, increasing life and reliability. The SMARTStart System includes an integrated micro-controller to provide:- -Programmable current profile during start up -System diagnostics, to detect starter motor faults -Interface with the existing control system via hardwired inputs & outputs -Serial communications interface, via Ethernet The system comes with a choice of either a wall mount or floor mounted panel, both of which have a greatly reduced footprint when compared to typical electrical contactor systems. The panel is designed to minimise Installation and commissioning time which can typically be completed in one day.