Coupling - Import export

Bushes are used as an additional component part of either Shear Banded Couplings or Lateral Connection Saddles. The purpose of a bush is to increase the outside diameter of a pipe to be connected if the pipe is too small for the coupling being used or the saddle being used.

Wraparound Couplings are designed to seal cracks in drainage pipes by simply wrapping around the the cracked area and connecting. This eliminates the need to cut out and section of pipeline and replace with new.

Adaptor Couplings, sometimes referred to as reducer couplings, are designed to connect unadopted drainage pipes with different outside diameters – connecting larger drainage pipes to smaller drainage pipes and vice versa.

Drain Couplings, sometimes referred to as couplers, are simple, easy to use drainage pipe connectors. Drain Couplings are designed to connect two pipes with the same or similar (within 10mm) outside diameter.

Shear banded couplings are specifically designed to connect and repair pipes on adopted sewer and drainage applications, as required by the UK water companies. The stainless steel central band protects the joint under shear loads and helps to keep the joining pipes aligned, helping to prevent pipe displacement.

Davall DSG supply a range on couplings

Fully compatible with existing ShrinKit gun and hose, this coupling is a push fit device that instantly attaches the gun to the hose, so no more need to keep screwing the hose on and off, so reduces user error when connecting, saving time and improved portability.

Knight Optical offer a range of Stock Ball Lenses and Half Ball Lenses, for use within Fibre Optics, Signal Coupling and Barcode Scanners. As the name suggests ball lenses are spherical lenses mostly made out of High Refractive Index Glass such as Sapphire, and LASFN-9 Glass. The reason ball lenses are most commonly used is for their ability to couple light in and out of fibres. The key feature of ball lenses is their short back focal length allowing for precision coupling where size or space is a limiting factor in the system. Ball lenses are typically used in pairs with one lens acting as a collimator for the second to focus the light back into the coupled fibre. Where a more compact solution is required a half-ball lens is typically more suitable. We hold a large inventory of Ball Lenses. •Stock sizes from 0.5 5mm to 10mm diameter. •Custom sizes available to quotation. •Half Ball lenses also available. For more information read PDF….

Ball Lenses are widely used for focusing & coupling light into & out of fibres. With the high refractive index of Sapphire (Al2O3) material, it yields a low spherical aberration that can be used in the range of UV from 200nm up to 5µm, and with it being one of the hardest materials they are resistant to damage. The key feature of ball lenses is their short back focal length allowing for precision coupling where size or space is a limiting factor in the system. Typically used in pairs, where one lens acts as collimator for the second to focus the light back into the coupled fibre. Ball Lenses are manufactured from a single substrate of glad and therefore, depending on the geometry of the input source, can focus or collimate light. Half Ball Lenses can also be used as an interchange with a full ball lens for more compact designs. Read the PDF for more information...

Interchange Data: • Interchangeable to MIL-C-51234 • Snap-Tite H/IH and Faster TNV/TNL Materials: • Machined components are manufactured using solid Steel, Brass, or 316 Stainless Steel bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life • Steel componentry is plated using ROHS Compliant Trivalent Chrome • Steel coupler sleeves are hardened to resist deformation and maximise service life • Steel nipples are machined from high-strength Steel and induction hardened • Tubular ‘TV’ valves are constructed from Steel bar stock and are designed for optimum performance in pneumatic applications Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F) • All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage • ¼” to 1” valve seals are crimped in place to maintain integrity during excessive flow conditions and

When your product is: • Expensive • Expensive to clean up • Expensive to reprocess or dispose • Hazardous to workers or the environment • Prone to accidental spillage and product loss Dry Disconnect Couplings are designed for quick and spill free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids. How it works • Easy to handle - Push and turn - free flow, turn and pull - closed • Time saving- No need to drain hoses or pipe systems • Economical-

Interchange Data: • Interchangeable with Snap-Tite 71-Series Materials: • Machined components are manufactured using solid Steel or 316 stainless bar stock. • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life. • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • Steel coupler sleeves are hardened to resist deformation and maximise service life. • Steel nipples are hardened to provide heavy duty performance. Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F). • All couplers and nipples incorporate PTFE or TPC-ET anti-extrusion rings to protect the seal components from dynamic impulse damage.

Find out about Dixon's new king crimp range of fittings which offer extra security to your fluid handling

Application: • designed specifi cally for blow-out prevention systems on drilling rigs Product Offering: • VEP-BOP Series: - thread to connect fl ush face interchange - 3/8” to 11/2” in Steel • H-BOP Series: - ISO-B interchange - 1/2” to 1” in Steel and 316 stainless • WS-BOP Series: - same reliable Wing coupling you know, new red components - 3/4” to 2” in Steel and 316 stainless Features: • fi re tested and Lloyd’s certifi ed to 700°C (1300°F) in accordance with API 16D, certifi cate available upon request • certifi ed at a test pressure of 5,000 PSI • red powder coated components and external seals provide easy BOP approved identifi cation • critical seals are FKM

All Dixon's, Andrew's, Boss-Lock and EZ Boss-Lock Cam & Groove couplers and adapters are produced to interchange with all product produced to MIL-C-27487, A-A-59326B Specification

A range of zero spill dry break couplings for a range of applications dispersal provided it is securely connected to an earth path. Food approved according to EEC 97/48 Classes A, B & C.

Dixon Group Europe offers a comprehensive range of hydraulic & pneumatic quick connect/disconnect fittings for your plant maintenance and fluid handling requirements. A wide selection of materials & sizes available

Precision Hydraulic Coupler, 10” Steel Tube and Snap-On Adaptor (Handy to put an instant extra length to the grease line).

For injection of Oil or Grease. E.g Into Bearings or Seals. For connecting into a 4 Jaw Hydraulic Coupler Lube Injector-D with Snap-on Coupling Part No. 32 408 44

Fernco manufactures a wide range of couplings that connect rainwater and wastewater pipelines using the internal surface, we call these ‘Icon’ (internal connection) couplings.

Davall DSG supply torque limiters

Part of our core business at Firow Propshafts is the manufacture, repair and distribution of truck, HGV and Bus Propshafts. Since 1981, we have delivered a range of truck, HGV and bus propshafts for all makes and applications. Our service is built on the understanding that a truck not operating is a truck not earning money. That’s why we offer a 24-hour turnaround on new propshafts with shorter lead times available within our local area for repairs. Next time a broken truck, HGV or bus propshafts gives you a VOR headache, give us a call. As well as our rapid turnaround VOR service, we can also provide small-medium batch work. So, whether you’re a stockist, fleet operator or repair facility, we can offer a saving based on batch quantity purchases. All of our new truck, HGV and bus propshafts are built by our in-house experts using high quality components. All we need is your registration, VIN, OEM part number or a pattern unit.

Cross+Morse offer low cost protection devices that prevent machine and drive damage: the original Torque limiters for an economical and durable solution and the Sheargard range for more accurate torque control and shaft synchronisation.