Cable test - Import export

AudioJoG Rack 19 powerCON True 1 fan out is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON True 1 outlet fan out or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON True 1 outlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results. Preprogrammed cable types. Single user Memory option for special cables. Mains and battery use ( adapter included ).

AudioJoG Rack 19 powerCON fan out is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON outlet (grey) fan out or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON grey outlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results. Preprogrammed cable types.

AudioJoG Rack 19 powerCON fan in is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON inlet (blue) fan in or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON blue inlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results.

Adaptor or Breakout for use with CableJoG 256,512 & 1024 and Limited use with CableJoG 128 & RibbonJoG cabel testers (68way cant be tested).Standard 1.27mm x 1.27mm pitch connectors in sizes 6,8,10,12,14,16,20,24,26,30,36,40,50,60 and 68 ways.Requires standard 64way ribbon cable for connection to CableJoG or RibbonJoG testers and standard 34way ribbon cable for testing the 68way connector.

Adaptor or Breakout for use with CableJoG 256,512 & 1024 and Limited use with CableJoG 128 & RibbonJoG cabel testers (68way cant be tested).Standard 2.00mm x 2.00mm pitch connectors in sizes 6,8,10,12,14,16,20,24,26,30,36,40,44,50 and 68 ways.Requires standard 64way ribbon cable for connection to CableJoG or RibbonJoG testers and standard 34way ribbon cable for testing the 68way connector.

Adaptor or Breakout for use with CableJoG 256,512 & 1024 and Limited use with CableJoG 128 & RibbonJoG cabel testers (68way cant be tested).Standard Female 1.27mm x 1.27mm pitch connectors in sizes 6,8,10,12,14,16,20,24,26,30,36,40,50,60 and 68 ways.Requires standard 64way ribbon cable for connection to CableJoG or RibbonJoG testers and standard 34way ribbon cable for testing the 68way connector.

Adaptor or Breakout for use with CableJoG 256,512 & 1024 and Limited use with CableJoG 128 & RibbonJoG cabel testers (68way cant be tested).Standard 2.00mm x 2.00mm pitch headers in sizes 6,8,10,12,14,16,20,24,26,30,36,40,44,50 and 68 ways.Requires standard 64way ribbon cable for connection to CableJoG or RibbonJoG testers and standard 34way ribbon cable for testing the 68way connector.

AudioJoG Rack 19 powerCON True 1 fan in is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON True 1 inlet fan in or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON True 1 inlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results.

Connectors: Standard 0.1" or 2.54mm x 2.54mm pitch headers 64way 60way 50way 40way 34way 26way 20way 16way 14way 10way Test Modes: MemoryOFF, just plug the cable in and press the test button. If the last connectionfound matches a standard connector pin count then the cable passes, otherwisethe cable has failed with either a short or open circuit. Memory ON, test the cable against aspecial cable held in memory. All 64 pins are checked. Specification: Continuity (endto end) less than 4.7K ohms. Short Circuits (end to end) and betweenconnected pins, less than 4.7K ohms. OpenCircuits (end to end) and between connected pins, greater than 10K ohms. Lessthan 1 second test time. Minimumdistance between connectors of the same size only 130mm. Non-volatilememory feature. L 290mm W143mm D 35mm.

Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: 3, 4, 5, 6 & 7 Pole XLR Male & Female DIN 3, 5 (180o) & 8 Pole MINI DIN 4 Pole BNC 50/75W / HD SDI RJ45, Ethercon USB A & B Memory: There are 6 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then LightingJoG Rack 8automatically scans all the connections and compares against information heldwith just one press of the test button. MEMORY works in singleand double ended test modes.. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.

Features: There are 2 rows of 6 LED's corresponding to each ofthe possible connector pins and one for the screen (or ground) connection. Aseach pin is activated, the LED's indicate all connections associated with thatpin, so that short, open and crossed circuits can be easily found. The LED'salso show the possibility of high resistance or leakage connections. Connectors: 3 Pole XLR Maleand Female 5 Pole XLR Maleand Female 6.35mm Jack,stereo or mono Single or Twin4.4mm Bantam, stereo or mono 3.5mm Jack,stereo or mono 2/4 PoleSpeakon DIN 180o 3 & 5 Pole RCA Phono BNC 50/75W /HD SDI Memory: There are 3 LED's indicating the state of the MEMORYoption. If the MEMORY LED is on, then AudioJoG Pro 5 automaticallyscans all the connections and compares against information held with just onepress of the test button. MEMORY works in singleand double ended test modes. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.

Features: There are 2 rows of 4 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. Connectors: 3pin XLR 1/4" Stereo Jack RCA Phono sockets Memory: There are 4 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then AudioJoG Pro 3 automatically scans all the connections and compares against information held with just one press of the test button. MEMORY works in single and double ended test modes. INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found. ioJoG tester

AVjog Rack Features: A single box solution for testing AV cables. Easy to use with only one button operation. Detects Open, Short and Crossed circuits. LCD display for test results. All major AV connectors present, no need for extra adaptors. 40+ preprogrammed cable types. Connectors: DVI HDMI SCART RJ45 Ethercon MINIDIN 4 Pole USBA & B 3pole XLR Male & Female RCAPhono RGB & RWY BNC50/75W/ HD SDIRGB Horiz& Vert FTYPE COAX

Features: Atwo box solution to testing AV panel installations. Eachbox only 150mm square Easyto use with only one button operation. LCDdisplay for test results. Allmajor AV connectors present, no need for extra adaptors. 6V battery or Mains use. Connectors: DVI HDMI SCART RJ45 MINI DIN 4 Pole USB A & B 3 pole XLR Male & Female 3.5mm Jack, stereo or mono RCA Phono RGB & RWY BNC 50/75W / HD SDI RGB Horiz& Vert F TYPE COAX Test modes: Panel, connect both units with appropriate patch cables.Press the test button. The Local end will identify the type of connection andif there are any open or short circuits. Cables, plug both ends of the cable under test intothe Local unit. Press the test button. The Local end will identify the type of connection andif there are any open or short circuits.

CableJoG 64 - CableJoG 64 provides a flexible testing system to suit individual customer requirements. The CableJoG 64 can test up to 64 individual connections of all manufacturers of connectors. This simple to use test instrument stores up to 88 separate cable configurations. Each cable that is tested is compared against the stored details to produce a pass, fail, open/short/crossed indication. Each test result can be transferred to a 'PC' or printer via a communication link to store, tabulate and print the information using the windows CableJoG Command Program (C.C.P.)

Features: CableJoG 512 provides a flexible testing system to suit individual customer requirements. The CableJoG 512 can test up to 512 individual connections of all manufacturers of connectors. This simple to use test instrument stores up to 59 separate cable configurations. Each cable that is tested is compared against the stored details to produce a pass, fail, open/short/crossed indication. Each test result can be transferred to a 'PC' or printer via a communication link to store, tabulate and print the information using the windows CableJoG Command Program (C.C.P.). Available only up to Windows XP. Menus: LEARN Plug in your cable and learn the connections. The connections and default test settings are held in compare memory.

Features: CableJoG 256 provides a flexible testing system to suit individual customer requirements. The CableJoG 256 can test up to 256 individual connections of all manufacturers of connectors. This simple to use test instrument stores up to 12 separate cable configurations. Each cable that is tested is compared against the stored details to produce a pass, fail, open/short/crossed indication. Each test result can be transferred to a 'PC' or printer via a communication link to store, tabulate and print the information using the windows CableJoG Command Program (C.C.P.). Available only up to Windows XP. Menus: LEARN Plug in your cable and learn the connections.The connections and default test settings are held in compare memory.

Features: The CableJoG 512 and CabeJoG 512 Plus provide a flexible testing system to suit individual customer requirements. The CableJoG 512 and CableJoG Plus 512 can test up to 1024 individual connections of all manufacturers of connectors. This simple to use test instrument stores up to 59 separate cable configurations. Each cable that is tested is compared against the stored details to produce a pass, fail, open/short/crossed indication.Each test result can be transferred to a 'PC' or printer via a communication link to store, tabulate and print the information using the windows CableJoG Command Program (C.C.P.). Available only up to Windows XP. Menu Options: LEARN Plug in your cable and learn the connections. The connections and default test settings are held in compare memory.

Developing method statements and procedures for below: We offer turn-key EPIC Oil & Gas project execution, including all procedures, HSE, testing, verification and certification services for: Subsea IRM – Inspection, Repair and Maintenance including: • 3D survey • Pipeline repair • Maintenance Construction & Decommissioning works which includes: • Isolation & Barrier testing • Spool Installation • Cable lay • Pipe lay • Shore pulling • Trenching • SCM Changeout • Connection and Pressure testing • Pre-commissioning • J-Tube & Riser Clamp Installation • Flexible Flowline and Jumper Installation • Mattress & Grout Bagging