Applicator - Import export

Knight Optical can offer UV Fused Silica Lenses for Flame Detection Applications. UV Fused Silica can be used in Flame Detection Applications, due to its high transmission into the NIR range (approximately <92% avg 400-2000nm) meaning that a clear distinction can be made between different wavelengths of light. UV FS also has a very low coefficient of thermal expansion 0.55x10-6K-1 at 300K) compared to N-BK7 (7.1x10-6K-1), meaning that it can still provide optical performance under high temperature. UV FS also has a high melting point compared to N-BK7, providing further protection for your application in high temperature environments. UV FS is comparable to N-BK7 or other similar optical glasses in its performance, having a very similar average transmission over the VIS range up to approximately 2000nm and a slightly lower refractive index. The Abbe constants of UV FS are also very similar to that of N-BK7, although slightly higher. Read PDF for more info

Intense Pulsed Light Systems use not only use filters, that are used to filter out the UV wavelength range; and transmit between 400-1200nm for use within cosmetic lasers that are designed to remove unwanted hair, vascular treatment and even acne treatment. But they also use Homogenizing Rods to help evenly distribute light. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. All our Homogenizing Rods are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptic’s PrismMaster, and Starrett AV300 Video Imaging System.. FOR MORE INFORMATION READ PDF..

Knight Optical can offer Littrow Prisms for use within Laser Applications. We supply a range of Littrow Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Laser Applications. Littrow Prisms are used near the end of an optical cavity of a laser system to finely adjust the output frequency by changing the AOI of the prism. For more information read PDF …

Our uncoated Precision Ball Lenses can be achieve a very high level of yield of magnification & are widely used for focusing & coupling light into and out of Microscopes. We can offer these in Sapphire, made from Al2O3, and BK7 or equivalent material. Sapphire allows for superior optical transmission qualities The key feature of ball lenses is their short back focal length allowing for precision coupling where size or space is a limiting factor in the system & therefore ideal in the use of Microscopes or microscopic attachments onto devices such as mobile phones. Ball Lenses are manufactured from a single substrate of glad and therefore, depending on the geometry of the input source, can focus or collimate light. Half Ball Lenses can also be used as an interchange with a full ball lens for more compact designs. Read the PDF for more information....

Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..

Intense Pulsed Light Systems use not only use filters, that are used to filter out the UV wavelength range; and transmit between 400-1200nm for use within cosmetic lasers that are designed to remove unwanted hair, vascular treatment and even acne treatment. But they also use Homogenizing Rods to help evenly distribute light. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. All our Homogenizing Rods are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptic’s PrismMaster, and Starrett AV300 Video Imaging System.. FOR MORE INFORMATION READ PDF..

Are you looking for a popular high refractive index and good IR transmission range material covering from 1.8-16µm? Here we are; Knight Optical’s Germanium glass material is ideal for your IR applications with its broad transmission range and opacity in the visible portion of the spectrum. Our Germanium windows are not only used in IR sensors, medical applications, and pyrometry; but also in IR imaging systems, and thermographic cameras. Typically operating in the 2µm to 14µm spectral range; that covers the LWIR (8-12μm) and MWIR (3-5μm) thermal imaging wavelength range. Our Germanium windows are available from stock, custom size and shape with Anti-Reflection coatings on one or both sides, and/or with Hard Carbon Diamond coatings. Read our PDF for more details...

Knight Optical can offer IR-cut filters for use in Heat Shielding. We supply a range of Custom and Stock IR-cut filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Heat Shielding requirements. Our IR-cut filters allow good transmission levels of visible light but cut off IR and UV radiation. Our precision grade filters have an AR coating to increase their visible transmission. In many systems that require heat shielding while still needing visibility an IR-cut filter can be used. These can attenuate infrared radiation and allow through visible light, allows your temperature sensitive equipment For more information read the PDF……

Knight Optical can offer Lithium Fluoride Windows for use within UV Applications. We supply a range of lithium fluoride windows for a range of applications. All individually QA checked &metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes & shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers using UV optics such as UV lasers. UV lasers are beneficial in some applications as opposed to longer wavelengths such as infrared or visible light as they do not heat the areas around the target. This allows the laser the cut materials by breaking atomic bonds, rather than melting the material. Due to the large band gap for Lithium fluoride, it’s crystals are more transmittive to short wavelength UV radiation than any other material and are ideal for use in X-Ray monochromators, as for use in VUV, UV, Vis and IR spectrums. Read PDF for more info….

Knight Optical can offer Rhomboid Prisms for use within Imaging Applications. We supply a range of Rhomboid Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Imaging Applications. Rhomboid Prisms are designed to displace a beam laterally while maintaining its direction. Rhomboid prisms rely on total internal reflection and so do not often need to be coated For more information read the PDF…

Knight Optical can offer you stock and custom lambda/10 mirrors for use in government testing for aerospace, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality images and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: Enhanced aluminium 94%R for visible applications. 99.9% dielectric for laser use in visible applications. UV aluminium for UV applications down to 180nm. 98.5% dielectric for laser use in the NIR applications. Ion plated silver for NIR-2000nm applications. Protected gold for 750nm to far infra-red applications λ/10 mirrors are used in the aerospace environment due to the vibration, temperatures & pressure through which they are exposed. To Find out More read the PDF

Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm. Sapphire is birefringent and if its use is for critical optical application then the crystal might have to be cut along the zero degree plane, or C-Cut. Random cut is usually cut along a plane that is 60° off-axis as the growth in this direction is the easiest to grow. Random cut is anything that is not the C-Cut angle. Sapphire can fluoresce depending upon the concentration of other minerals within the lattice, for example Iron (Fe) or Chromium (Cr). Clear Sapphire might fluoresce orange when illuminated by UV light if impurities are in the crystal. Fluorescent free Sapphire has to be grown from 'pure' feedstock and seed and in an environment that cannot place impurities into the lattice. Click PDF link to read more …...

Knight Optical can offer Gelatine Neutral Density Filters for use in Photographic Applications. We supply a range of Gelatine Neutral Density Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Photographic Applications. Our Neutral Density Filters attenuate light neutrally over a wavelength range (usually visual). They can be used to lower the intensity of light prior to the image plane. These are often used in photography, allowing photographers more flexibility with their setups to achieve the desired effects. Often an ND filter will be used in conjunction with a long exposure to prevent washed out and overexposed images. For more information rread the PDF ….

KO can offer Metallic Neutral Density Filters for use in Photographic Applications. We supply a range of Metallic Neutral Density (ND) Filters for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specifications. What’s more, our Metallic ND Filters are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Our Metallic ND Filters reflect (with a metallic coating) light neutrally over a wavelength range (typically visual). They can be used to lower the intensity of light prior to the image plane. These are often used in photography, allowing photographers more flexibility with their setups to achieve desired effects. Often, an ND filter will be used in conjunction with a long exposure to prevent washed-out and overexposed images. They can also be used to add motion blur, reduce depth of field and to use a wider aperture. For more information read PDF…

Knight Optical can offer UV Fused Silica Lenses for Solid State Laser applications. UV FS is a prime choice for lenses in use with Solid State Lasers due to its consistently high transmission in the UV/VIS/NIR regions. This means that it can be used with a range of different laser types, such as Titanium-doped sapphire (tuneable to 660-1080nm) or Alexandrite (tuneable to 700-820nm) with very little change in performance. UV FS is comparable to N-BK7 or other similar optical glasses in its performance, having a very similar average transmission over the VIS range up to approximately 2000nm and a slightly lower refractive index. The Abbe constants of UV FS are also very similar to that of N-BK7, although slightly higher. Read PDF for full specification

Knight Optical can offer Toroidal Mirrors for use within Optical Systems. We supply a range of Toroidal Mirrors for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical Systems. Our Toroidal Mirrors are designed to minimise astigmatism when used in off-axis geometry. They are easier to manufacture than parabolic or ellipsoidal mirrors and therefore can be made much cheap with the same quality. Toroidal mirrors are used for correction of aberration in a range of scientific instrument applications such as spectroscopes monochromators and imaging devices. For more details read PDF…

Knight Optical can offer Light Guides for use within the Cosmetics Industry. We supply a range of Light Guides for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within the Cosmetics Industry. Our Light Guides are the key element in cosmetic laser, or intense pulsed light (IPL) applications. IPL is a cosmetic application commonly used for hair removal. IPL application have requirements of different wavebands and so our custom light guides are available in a choice of materials and coatings to suit your waveband requirements. For more information read PDF…

Due to high intensity light from the laser, mirrors used with a laser application require a high damage threshold, and high reflectivity. Knight Optical can help! Laser mirrors are used to reflect or redirect the laser. This manipulation of the beam means it is great for laser applications where there is limited space, as the beam can be steered multiple times. We manufacture mirrors used in the UV/VIS/NIR and infrared. We provide a number of mirrors from stock with coatings at infrared wavelengths such as: Dielectric (98% NIR) Protected Silver (96% VIS/NIR) Protected Gold (97%@750-FAR IR) These are available to purchase from stock in a wide ranges of sizes from 6.3 mm in diameter to a 300mm x 300mm square and various different thicknesses. They are also available with varying flatness specifications with λ/10 also available for immediate shipment and for you to achieve the highest performance. Read PDF for full specification..

Knight Optical can offer Circular Sheet Polariser for use within Photographic Applications. We supply a range of Circular Sheet Polariser for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Photographic Applications. Our Circular Polarisers consist of a quarter wave plate cemented to a linear polariser. While a linear polariser may be used to reduce glare during photography (such as reflection from the surface of a body of water), autofocus systems struggle to correctly focus on linearly polarised light. With the addition of the quarter wave plate, this has little impact on the intensity of incident light to the sensor, but it makes autofocussing much easier. For more information read PDF…

Knight Optical can offer Lithium Fluoride Lenses for use within UV Applications. We supply a range of lithium fluoride lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers using UV optics such as UV lasers. UV lasers are beneficial in some applications as opposed to longer wavelengths such as infrared or visible light as they do not heat the areas around the target. This allows the laser the cut materials by breaking atomic bonds, rather than melting the material. Due to the large band gap for Lithium fluoride, it’s crystals are more transmittive to short wavelength UV radiation than any other material and are ideal for use in X-Ray monochromators, as for use in VUV, UV, Vis and IR spectrums. For more info read PDF…

Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within Fibre Optic Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Our plane mirrors are used within fibre optic applications such as testing the fibre optic signal to help understand the strength of the signal. Plane mirrors also known as front surface mirrors or first surface mirrors are used widely within Fibre Optic applications. As stock we hold many general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. READ PDF FOR MORE INFORMATION

Knight Optical offer a range of Stock Ball Lenses and Half Ball Lenses, for use within Fibre Lasers. As the name suggests ball lenses are completely spherical lenses mostly made out of High Refractive Index Glass such as Sapphire, and LASFN-9 Glass. The reason ball lenses are most commonly used is for their ability to focus light when leaving a fibre optic, so that it can therefore be used for a laser application. The key feature of ball lenses is their short back focal length allowing for precision coupling where size or space is a limiting factor in the system. Ball lenses are typically used in pairs with one lens acting as a collimator for the second to focus the light back into the coupled fibre. Where a more compact solution is required a half-ball lens is typically more suitable. We hold a large inventory of Ball Lenses. •Stock sizes from 0.5 5mm to 10mm diameter. •Custom sizes available to quotation. •Half Ball lenses also available.

Knight Optical can offer you stock and custom lambda/10 mirrors for use in Spectromters, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality signals and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: •Enhanced aluminium 94%R for visible applications. •99.9% dielectric for laser use in visible applications. •UV aluminium for UV applications down to 180nm. •98.5% dielectric for laser use in the NIR applications. •Ion plated silver for NIR-2000nm applications. •Protected gold for 750nm to far infra-red applications Lambda/10 mirrors are used to produce a better quality signal from the mirror, resulting in a higher quality result for transmission. Read PDF for full spec

The new Sirius 100 range of labelling systems are specifically designed to meet the modern demands of today’s fast-moving, highly flexible production lines. Accraply has transformed the technology-driven linear labelling of its high-speed systems into an extremely cost effective single and twin head labelling solution. This user-friendly, rapid changeover labelling system can serve the contract packaging, food, and automotive industries and can transform your production line with its highly flexible product handling options and controls. This Sirius pressure sensitive labelling machine has superior product handling options and controls that allow for a wide range of applications due to its Servo Axes. Synchronized for perfect speed matching on label applications, it is a highly flexible, streamlined machine to add to your production line. Learn more about the benefits of the Sirius 100 Pressure Sensitive Labelling System below.

The Sirius MK6 Labeller is an accurate and reliable system manufactured for high-speed label applications. With a maximum production speed of 300 products per minute, the Sirius MK6 increases your production line’s speed and efficiency. Built with a heavy-duty conveyor and stainless-steel base frame, this label application machine is made to last. It’s innovative “no tool” adjustment process allows the user to effortlessly perform product changeovers. The operating system is cost effective, allowing for easy use, setup, and maintenance. It also includes video tutorials on maintenance, changeovers, and system alarms. This system is not only easy to use, but also can keep up with the industry’s advanced machine capability requirements. The Sirius MK6 is a Pharmaceutical Grade Labeller.

The Graham & Sleevit DF Series is a line of durable tamper evident label applicators suitable for a wide range of applications. For over half a century, Accraply has been the UK’s leading provider of labelling equipment. These labelling machines are customisable to fit your exact specifications. They engineered for easy installation and maintenance, allowing you to easily reach your production goals. Accraply’s line of Graham & Sleevit tamper proof labelling machines can reach production speeds up to 300 products per minute. They can manage many materials, proving to be most suitable for PVC, rPET/PETG, OPS, and PLA. These machines are suitable of sleeving products from 20mm up to 195mm in dimeter at sleeve lengths from 20mm up to 50mm. The State-of-the-art servo film feed facilitates easy setup providing accurate sleeve placement. The design philosophies utilised on our range of Tamper Evident Applicators are adapted to our Full / Part Body Sleeve Applicators.

The Accraply Shrink Sleeve Models RF150 & RF250 are compact, operator friendly and easy to maintain shrink sleeve applicators that can be used to apply full body or tamper-evident bands to a variety of container shapes and sizes. Shrinkable material is cut to length and synchronously applied at conveyor speeds for the best possible material-to-container placement accuracy. Oval, round and square containers made of plastic, glass, or metal can be handled at speeds up to 150 (RF150) or 250 (RF250) per minute at a 30mm cut-length. Sleeve materials made from PVC, PET/PETG, OPS, or PLA can be run at thicknesses between 40 to 70 microns. The RF Series applicators may be easily customised to suit the exact requirements of a project using standard, compatible modules. Change parts for the RF Series applicators are low cost items that can be fitted in minutes without the need for tools, keeping downtime to a minimum.

FUGA & FINISH Light is a lightweight, ready-to-use all-purpose joint compound for filling plasterboard joints and complete skim coating of different types of substrates. Application: • For filling and finishing joints between gypsum boards - Levels Q1-Q2 • Surface finishing of gypsum boards and common surfaces – Levels Q3-Q4 • Application in premises with normal humidity Advantages: • Premixed and ready to use right out of the container • Lightweight formula for easy application and great coverage • Can be diluted with water • Suitable for manual or machine application TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Plastic pail: 20 kg • Consumption for joint filling: ~ 0.35 kg/m² • Coverage for joint filling: ~ 66 m²/ 20 kg • Consumption for skim coating: ~ 0.50 kg/m² • Coverage for skim coating: ~ 40 m²/ 20 kg • Pails per pallet: 33 pcs • Pallet weight: 660 kg