Lubricants for the automobile industry - Import export

Lubcon manufactures more than 1000 different products and offers perfectly suited lubricants for every application in nearly all industries. Along with a wide lubricant portfolio, we provide innovative lubrication system solutions for optimum performance and efficiency.

Temperature resistant, high-performance lubricating and release agent with NSF H1 registration. It has a low coefficient of friction and shows good viscosity/temperature behaviour even under high chemical influences. It has good separating and sliding properties; is neutral towards metals, plastic and rubber and is thus particularly suitable in the tyre and rubber industry.

Fully synthetic special oil for cutting, milling and drilling of all metals. It does not drip, due to its excellent adhesion and can be applied even in vertical drilling positions and at high cutting speeds.

Premium high-temperature oils. Fully synthetic lubricants formulated with PAO/ester oils and special additives for extreme operating conditions in temperatures up to approx. 250 °C, non-toxic and miscible with mineral oils. Recommended for the lubrication of double belt presses, film stretching machines, timing and conveyor chains, slide rails in lacquer drying furnaces in the automotive sector or the mechanical engineering sector as well as bearings and gears at medium loads and extremely high temperatures.

Antioxidant & speciality lubricant additive packages for industrial speciality applications such as H1 incidental food contact approved lubricants, 8000 hour synthetic compressor oils, ashless hydraulic oils, gear oils, automatic transmission fluids, engine oils, high temperature chain oils, vegetable oil based lubricants, EU Ecolabel compliant lubricants, Marine Environmentally Acceptable Lubricants (EAL)

Multi-purpose H1 approved greases based on food grade oils and aluminium special soap, suitable for guideways, sliding components as well as bearings. These very adherent greases have a wide temperature range and are thus suitable and approved for many applications in the food-, beverage- or pharmaceutical industry

Sliding agents for valves and fittings in the oxygen-fuel technology sector, oxygen lances in steel manufacturing, oxygen apparatuses in the medical sector, diving centres as well as for roller and journal bearings in oxygen applications.

Pastes are essentially lubricants (oils, thickeners and additives) with a higher content of thickeners and solid lubricants. Depending on the selection of the additives, they can be used in multiple applications. Lubricating and assembly pastes with a high content of solid lubricants provide excellent lubrication and separating effect, even under extreme temperatures and loads. Due to the excellent media resistance, they establish a water and steam-resistant lubricant film and protect reliably against tribo-corrosion. Pastes are often used for the start-up and running-in lubrication of chucks, joints, journal bearings, pins, bolts and bushings. Furthermore they are used for the assembly and disassembly of bolted connections which are for example difficult to disassemble after high-temperature applications.

Lubcon lubricants with antimicrobial additives are H1 approved and offer additional safety by suppressing the growth of germs.

Complex, industrial applications require unique solutions. LUBCON offers sophisticated products for all industrial applications. In close collaboration with reputable machine equipment manufacturers the products are continually subject to development. This assures that our lubricants are perfectly tailored, at any time, to the constantly changing application requirements. Quality and innovation are thereby our top priorities. Regardless of whether extreme low or high temperatures, humidity, high loads, aggressive environments, life-time lubrication or extreme speeds, we offer our customers the appropriate tribological solution.

Lubcon offers an assortment of customised solutions, specially designed for the lubrication of high speed spindle bearings. Our high performance greases feature an optimum base oil viscosity and mechanical thickener stability. These products meet the demanding requirements in modern high-precision machine tools with speed factors of up to 3 Mio. n x dm.

Fully biodegradable, solid-free, long-term lubricating greases for the lubrication of track side face/wheel flange. The biodegradable ester oil based lubricants reduce significantly noise, minimise wear at wheel and rail contact surfaces and show good temperature behaviour during all seasons. They are particularly resistant to water/salt water, offer high adhesive strength, outstanding high load carrying capacity as well as excellent oxidation stability.

Safety, performance and minimum maintenance costs are our focus. Years of close collaboration with machine manufacturers in food processing and packaging have allowed us to develop a full product line of premium, physically non-hazardous lubricants, that are neutral in odour and taste. Our synthetic greases and oils have been formulated to meet the performance requirements of your machines, even in the harshest environments.

Next to the comprehensive range of H1 food grade lubricants, Lubcon offers 3H approved release agents, used on hard surfaces in contact with food products to prevent these from adhering during processing.

Chemically and thermally stable polymers with a low evaporation rate, high pressure and oxidation stability as well as good material compatibility towards elastomers and metals for the use in oxygen and vacuum applications.

Safety, performance and minimum maintenance costs are our focus. Years of close collaboration with machine manufacturers in food processing and packaging have allowed us to develop a full product line of premium, physically non-hazardous lubricants, that are neutral in odour and taste. Our synthetic greases and oils have been formulated to meet the performance requirements of your machines, even in the harshest environments.

Lubcon manufactures more than 1000 different products and offers perfectly suited lubricants for every application in nearly all industries. Along with a wide lubricant portfolio, we provide innovative lubrication system solutions for optimum performance and efficiency.

Fully synthetic compressor oils (PAO/ester and additives) for the long-term application at medium/high temperatures. The oils are neutral towards elastomers, have a low evaporation rate and protect reliably against wear and corrosion.

Thermally stable, adherent, synthetic oils for the preservation and lubrication of steel belts and carpet chains as well as bending and chain rods in double belt presses. They feature low evaporation loss and form a corrosion and wear protecting lubricating film.

Highly effective, silicone-free ceramic sliding lacquer with extreme adhesive strength, good load carrying capacity and a very good separating effect. It forms a water and oxidation stable protective film which offers good lubricating properties.

Black/grey paste spray based on synthetic hydrocarbons, suitable as a lubricating and anti-seize paste preventing the seizing of bolts, hinges and bolted joints. It is particularly suitable for low-speed bearings, eccentrics, cam discs, spindles and chains.

Lubricating and assembly paste, free of heavy metals with white solids protecting against tribo-corrosion. Due to the latest additive technologies it protects very well against wear and corrosion in guides, joints, bolts, bushings, cams and hinges, that are subject to high loads.

Highly concentrated MoS2 -paste characterised by a low coefficient of friction and therefore special suitability for the treatment of metal parts with low tolerances and surface roughness. It can also be used as a release paste and reliably prevents metal to metal contact.

Lubricating and sliding agent for the lubrication of inaccessible bearing points or internal sliding points of roller, bush or pin chains. It protects reliably against wear, reduces friction and allows extended lubrication intervals due to its superior performance.

We offer a wealth of knowledge in automatic lubrication solutions, with many years’ experience in designing, upgrading, installing, and maintaining auto lubrication systems across the UK. Once we have determined your needs on your needs, we can work with you to find the correct and most cost-effective system, to put in place. We can offer: Supply of automated Lubrication systems – Either in standard kit form, or via chain/oil brush application. In-house filling of grease or oil lubricants into single or multi point lubricators. Supply of disposable, refillable, and removable automatic lubricators. Already have an automatic lubrication system in place? We have a vast inventory of lubricants and greases that can be used within automatic systems.

Make Lubricants SW your first choice for a wide range of food lubricants at highly competitive prices. We service companies throughout the UK & Ireland. We are experts in supplying food grade lubricants to businesses across the UK and Ireland from our brand new premises in Devon, which houses a large, fully-stocked warehouse. Our knowledgeable team of lubricant specialists will be able to recommend the best food grade grease or oil based upon your requirements. Our national delivery options for our lubricant solutions make us a one-stop shop for many large companies, many of which request us to source new products. This, coupled with our buying power and the enthusiasm of our staff, means we rarely say no when asked to source or supply new lubrication lines.

Maintenance-Free Roller Bearings with Extended Service Life. Turmocomp HD 150 is a lubrication concept enabling effective lubrication of roller bearings even in complex operating conditions. The lubricating compound is a composition of molecular polymers and synthetic base oils. For applications in the food industry, H1-approved oils are being used. A subsequent heat treatment hardens the compound to a firm, open-porous matrix structure. It completely fills the bearing cavities and cannot be displaced easily. Due to its structure, a significantly greater amount of lubricant can be stored in comparison to conventional grease. This compound is suitable for almost any geometry of roller bearings. Turmocomp HD 150 is the perfect solution in applications where re-lubrication with conventional grease or oil is not possible or where bearing failures occur regularly after a very short time due to harsh operating conditions.

Lubcon Smart Task Control (STC) A unique tool to support accurate and correct execution of lubrication and maintenance tasks. The cloud based app with user management ensures real time digital recording of all executed tasks. The advantage of such a system is the documentation and availability of data which can be used for status reports, KPI tracking, budgeting and time management in real time. Using Lubcon Smart Task Control as a strategic maintenance tool will increase efficiency and productivity within production. Additionally it will help to reduce the consumption of energy, labour cost, spare parts and even lubricants.

InS/H1 approved cleaning and preservation oils with very good lubrication characteristics and surface wetting properties for the lubrication of disc-cutting systems in the paper and corrugating industry. The oils dissolve glue and paper fibre deposits.