Results for
STALEVAR COMPANY LLC
United Kingdom
STEEL ROD Our Steel Round Bar range can be cut size to suit your requirements. They are available in non standard sizes in both Metric and Imperial and in a wide variety of grades, including: 303, 304, 316, 321, 410, 420 and 431. We provide a quick turnaround on all our orders, immediate dispatch and offer a 1st class polishing service. Our clients range from large corporate organisations to domestic homes, so whether you require a large order or a single product we would be happy to help. Our friendly and experienced team can help you to decide which size, grade and finish will work best for you. For more information about our stainless steel rod products please contact us on +380675624220 or email: marketing@stalevar.company.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Basement inputs and transitions are permanent joints of polyethylene and steel pipes "polyethylene steel", intended for installation in the places where the underground pipeline exits from the ground. The permanent connection is made in a steel case to protect the basement entry from mechanical damage and prevent pipe cooling. Basement inputs are subdivided into L shaped bushings made of insulated steel pipe; bushings made by free bending of a polyethylene pipe with a polyethylene steel transition device; bushings with straight sections of insulated steel and polyethylene pipes; L shaped bushings, combined with the transition "polyethylene steel", insulated with fiberglass. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
A armature is a product or a blank (an intermediate link in the production of any part, equipment) made of strong steel grades, the use of which is widespread in many industries, the automotive industry, and agriculture. A feature of such a blank is its similarity in shape and size with the future product. Strength, flexibility, wear resistance made them indispensable components in the production of various parts. Raw materials for the production of such products are carefully selected taking into account their future field of operation. They reveal what loads the part will be subjected to in the future, in what environment it will be used. After processing the information received, the most suitable steel grades for specific operating conditions are selected. Common steel grades for the manufacture of forgings are 20, 20X, 35, 35 40, 45, 40X, 08X18H10T, 09G2S, 12X13, 12XN3A. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Pig iron is one of the most liquid alloys due to its technical qualities and optimal price. Improvement of production and technological processes, updating of equipment and the qualifications of our specialists allow us to offer our customers high quality casting and service. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 460 mm x 360 mm; Casting height up to 400 mm; Casting weight from 0.2 kg to 20 kg; The productivity of each line is 120 molds per hour. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 1550 mm x 1200 mm; Casting height up to 600 mm; Casting weight from 50 kg to 2500 kg; Productivity 6 10 molds per hour. cast iron of the following grades gray cast irons SCh 15, SCh 20, etc.; high strength cast irons VCh 450 10, VCh 400 15, VCh 420 12, VCh 507, VCh 603, etc.; low alloyed silicon heat resistant and wear resistant cast irons ChKh, IChKh, ChS, ZhChS
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Products from a bent profile are made from hot rolled (hc) and cold rolled (hc) sheets (rolls) with a thickness of 1.5 to 5 mm on special industrial bending machines and guillotines with consistent dimensional data, in accordance with GOST (TU). The range of metal products obtained from a flat billet bent channel GOST 8278; bent corner GOST 19771. The bent channel is designed to significantly lighten and reduce the cost of the final cost of metal structures and other demanded products. Despite the fact that it is less durable in comparison with the hot rolled analogue , its use is in demand in mechanical engineering, furniture factories and manufacturing companies. The length of the billet of the channel is 6 meters, the width of the flange is from 30 to 200 mm, it is possible to manufacture a bent channel by special order . You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Brass of two or more elements of the periodic table. Often it is copper, zinc and alloying link that impart positive attributes. Nowadays, many brass products are easily replaced by copper ones. In Ukraine, there are often two types of brass rolled metal products. Simple alloys of brass contain two components (copper and zinc) in the name there is a single letter and a two digit number of copper. A bright representative of this range is L63. Brass which contains 63% copper and 37% zinc. Special brass contains more than two elements. The name contains more designating signs due to additional alloying components of the periodic table. A bright representative on the market of brass ЛС59 1, one more percent of lead is concentrated there. From the above, the brightest representatives of brass on the Ukrainian market are L63 and LS59 You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Steel square GOST 2591 88 is produced hot rolled and cold rolled high (B) and normal (C) strength. The products are in demand in the engineering and manufacturing industries, and are also widely used in construction and in everyday life. The following types of metal products are made from it tools, fences, gratings and mechanical engineering parts. Dimensional grid of steel square billets 10 200 mm, steel grades St.3 St.45, St.40X, etc. It is used in the manufacture of products obtained mechanically on milling and turning machines. The calibrated steel square is produced by the cold rolled method with increased strength and accuracy of edges and sides, which means that it does not require additional machining of the sides, which subsequently reduces the time and resources for the production of the final product. The length of the workpiece to be produced is usually from 2 to 6.3 m. The maximum deviation of the flatness of a metal product along its long part is no more than 1%.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
The hot rolled steel circle is produced at Ukrainian factories, it is an excellent material for the manufacture of a wide range of products produced by the mechanical method on lathes and cutting machines, metal structures , supports, and other products. The steel circle is in demand in mechanical engineering, manufacturing, construction. It is used for making bushings, cylinders, locks, guides, rods, grids, dumbbells, swings, horizontal bars, lattices, washers, linings, pins and other cylindrical products, seamless pipe . Hot rolled steel circle GOST 2590 88, its standard dimensions length from 4 to 6.3 m, thickness from 10 mm to 330 mm. One of the varieties of round products is a calibrated circle produced by the method of cold drawing, grinding, polishing the surface of the product, and the compliance of surface dimensions to microns, which does not require further mechanical processing. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Galvanized sheet is made from flat rolled sections by the method of uniform zinc spraying to ensure its durability. According to the design, the product is made smooth of small thicknesses; it is further modified into a perforated and corrugated sheet on special machines, which is later used for the construction of barriers, roofs, gazebos, etc. Smooth galvanized sheet is widely used in mechanical engineering and in everyday life. It is used to make water tanks, cisterns, barrels, trailers, fences, cars, wagons, water transport, carts, shovels, road signs, playgrounds, etc. Galvanized corrugated sheet is intended for the manufacture of pedestrian areas, crossings, ladders, footrests, steps. The galvanized product is produced in rolls and in sheets with a width of 1000 to 1500 mm, a length of up to 2500 mm with a wall thickness of 0.3 2 mm You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Rail transport is one of the few opportunities for moving large volumes of cargo by land. Thanks to these exceptional capabilities, his services are in maximum demand in all industries, both now and in the future. A rail is an element of a railway track, which directly takes the entire load of the rolling stock. Constructed from carbon steel and fixed to timber or concrete sleepers We offer domestic made railway rails and other rail products widely used in Ukraine of various types and modifications for wholesale and retail purchases, as well as components for them. The range of rails we offer makes it possible to repair a wide range of types of rail fasteners, from access roads of industrial enterprises leading to main roads, to industrial rail sections located inside buildings, turnouts, underground mine tracks, as well as their construction. The length of a railroad train is from 12.5 to 100 meters. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Hot rolled steel strip is produced from a part of a metal sheet (coil) on a guillotine installation by shearing or hot rolling necessary for the manufacture and production of various flat fastening structures, tools, components and assemblies, while substantially alleviating our labor costs, energy costs and time for the preparatory process, and cutting the sheet. Overall dimensions of a flat workpiece length up to 6 meters, thickness 3 20 mm LLC "Company STALEVAR" can produce hot rolled strip , according to the specified conditions and overall dimensions of the buyer. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
I beam (I beam) is a type of metal product used for supporting structures and floors of automobile and railway bridges, tower, bridge and gantry cranes, crane girders, supports and other supporting structures. The main task of the beam is to carry the strength force to all types of permissible loads. Of all the presented type of metal products, it is the most durable. Depending on the bearing load, the selection of the beam is made. Do not overload the metal structure with the permissible size of the beam, as it may become unjustifiably expensive and difficult to transport. There are certain formulas and criteria for the selection of the required brand and size of the beam. If necessary, our qualified specialists will help you as much as possible to select the required sizes of metal products. The length of the I beam, as a rule, is 12 meters or more, and the width of the flange is from 10 to 50 cm. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Steel reinforcement is used and necessary for the construction of buildings, concrete structures, formwork, structures, which makes it possible to manufacture a reinforced concrete structure that is stronger and more durable, it is produced at factories in Ukraine with a set length of 12 meters. Depending on the strength requirements for the future building structure, its diameter is selected. For example, for the foundation of a fence, the diameter of the reinforcement can be 8 mm, but for building a house, a thickness of 10 12 mm is required, for bridge cranes 36 40 mm. The surface of the construction reinforcement is made in the form of notches specially for better fixation in concrete. The growth rates of construction in our country and in the world as a whole are constantly increasing. Every day, new materials and advanced technologies appear that significantly improve this process. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSLADE OAK LTD
United Kingdom
A unique alternative to traditional cocktail glasses, this Straight Copper Mug is perfect for presenting on-trend cocktails and beverages. With a vintage copper PVD coating and stainless steel construction, this copper cup is ideal for commercial or domestic use and is highly resistant to staining.
NEW LONDON METAL WORKS
United Kingdom
We take our measurements on site and draw 3D pictures and produce canopy products.
Request for a quoteCTT TECHNOLOGY (UK) LIMITED
United Kingdom
Material selection: The selection of high-quality AL6061-T651 aluminum alloy as raw materials, which has good processing properties and mechanical properties. Round rod processing: The aluminum alloy round rod material is placed on the lathe for processing, and through the lathe processing, it forms the desired shape and size. CNC four-axis machining: After the round rod machining, the aluminum alloy round rod is further machined using the CNC four-axis machining center to precisely control the size and shape. Smooth surface: The surface of the processed aluminum alloy round rod is smoothed to obtain a smooth and flat surface and improve the appearance quality. Anodizing: the natural anodizing treatment increases the corrosion resistance and surface hardness of the product, while maintaining the natural color of the aluminum alloy. Accuracy requirements: Ensure that the flatness of the product is within 0.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Metals - Import exportNumber of results
18 ProductsCountries