Isolating transformer - Import export

Product Features: • Intended for non-patient connected indoor applications where protection of sensitive electronics is required: • High end audio / studio use • Medical electronics • High end test equipment / laboratory • cULus Listed to UL 60601-1 (1st Edition) and CAN/CSA-C22.2 No. 601.1-M90 (R2005). • Each unit provides complete line isolation and noise filtering plus utilizes a Faraday shield to reduce leakage currents below UL60601-1 requirements (under 100 microamps). • Reduced noise coupling due to floating AC output. • Not included to be used to supply power to life support appliances. • 3 Different VA Capacities available - 500VA, 1000VA and 1800VA. All rated 50/60 Hz. • 4 Different electrical configurations: • 120V-120V Straight isolation ("178" Series) • 240V-240V Straight isolation ("240" Series) • 240-120V Step down isolation ("289" Series) • 120-240V Set up isolation ("298" Series)

Product Features: • Dual primary 115/230 VAC. • 50/60 Hz. operation. • Dual secondaries for series or parallel connections. • 4,000 V RMS Hipot test. • Class F insulation (155°C). • Chassis mount (either two or four hole depending on size). • Five VA sizes to choose from. • Dual bobbin construction. • Dual use terminals (solder lug or quick connect). • C UL US recognized (E207860). • TUV Type approved. • CE certified to IEC 950 (Approved to EN 60-742 Safety Isolating Transformers).

Product Features: Primary 120VCA, 50/60 Hz., Secondary 240VAC. Provided circuit isolation. • Torodial transformer for high isolation, low noise, light weight cool operation and low profile. • 50 or 60 Hz. operation, step up (120VAC to 240VAC). • Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding). • Input (primary) connected to a 5 foot cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to a standard North American duplex - 3 wire grounded receptacle (NEMA 6-15R). • Transformer Hi-Pot test of 4,000V RMS between primary and secondary. • Features include ventilated black steel case with rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Primary 240VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operating and low profile. • World wide applications, 50 or 60 Hz. operation, step down (240VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard 250V 2 pole, 3 wire - North American plug (NEMA 6-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Primary 240VAC, 50/60 Hz., Secondary 240VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operation and low profile. • World wide applications, 50 or 60 Hz. operation (240VAC to 240VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard North American Plug (NEMA 6-15P). • Output (Secondary) connected to a standard - 3 wire grounded duplex receptacle (NEMA 6-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Large core area for excellent low frequency response. • Manufactured with high quality 29M6 laminations (for low distortion). • Concentric wound for excellent coupling. • Isolation type transformer (i.e. separate primary and secondary). • Primary: 600 Ohms (using 6" wire leads). • Secondary: 8 Ohms with a 4 Ohm center tap (using solder logs). • Power: Rated at 12 watts. • Frequency response: 30 Hz. - 20 Khz. (+/- 1 db @ Full Power - 1 Khz. Reference). • Weight: 1 Pound, 4 Oz. • Mounting: 2 Hole bracket mount - on 2 and 13/16" mounting hole centers.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 150 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), Pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies (except 107X). • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 500 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 2 Watt (+/- 1.5 db, 300Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency rating. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Inverter Drives, PLCs, HMIs, MCG, Relays, Timers, Switches & Isolators, Transformers, Power Supplies, DIN Terminals and Terminals

Panel & Stud termination Manufactured to BS EN61558 DESCRIPTION This range fulfills the requirements of control, safety and isolating transformers. Inrush currents and short circuit characteristics of ATL's transformers conform to up to date legislations and are compatible with all reputable manufacturers' switches breakers and magnetic release devices. All of our products are bespoke therefore voltages must be specified at enquiry stage. The transformers have protection against humidity and vibration. Our finger proof block terminals are shock proof and conform to BS EN & UL standards, other termination available please specify at enquiry stage. All of our transformers come complete with multiple footprints fixing centre's to enable a varied range of mounting configurations ref data sheet table. ** Click for more **

Panel & Stud termination Double Wound Isolation transformer - Manufactured to BS EN61558 DESCRIPTION This range fulfills the requirements of control, safety and isolating transformers. Inrush currents and short circuit characteristics of ATL's transformers conform to up to date legislations and are compatible with all reputable manufacturers' switches breakers and magnetic release devices. All of our products are bespoke therefore voltages must be specified at enquiry stage. The transformers have protection against humidity and vibration. Our finger proof block terminals are shock proof and conform to BS EN & UL standards, other termination available please specify at enquiry stage. All of our transformers come complete with multiple footprints fixing centre's to enable a varied range of mounting configurations ref data sheet table. ** Click for more **

Shock Proof Screw terminals to UL and CSA standards Manufactured to BSEN61558 DESCRIPTION This range fulfills the requirements of control, safety and isolating transformers. Inrush currents and short circuit characteristics of ATL's transformers conform to up to date legislations and are compatible with all reputable manufacturers' switches breakers and magnetic release devices. All of our products are bespoke therefore voltages must be specified at enquiry stage. The transformers have protection against humidity and vibration. Our finger proof block terminals are shock proof and conform to BS EN & UL standards, other termination available please specify at enquiry stage. All of our transformers come complete with multiple footprints fixing centre's to enable a varied range of mounting configurations ref data sheet table. ** Click for more **

Enclosed Transformer to IP21 powder coated mild steel Any configuration of switches, sockets and protection devices can be fitted on request. DESCRIPTION Our standard range of robust enclosed transformers are available to any given IP rating, material and finish. Our standard enclosures are Mild steel and finished to either Hammer grey or RAL 7032, IP21 as standard. Please note that for transformers enclosed above IP44 this data sheet is not applicable, please contact our engineers for physical dimensions. This range fulfills the requirements of control, safety and isolating transformers. Inrush currents and short circuit characteristics of ATL's transformers conform to up to date legislation and are compatible with all reputable manufacturers' switches breakers and magnetic release devices. All of our products are bespoke therefore voltages must be specified at enquiry stage. The transformers have protection against humidity and vibration. ** Click for more **

Solder tag terminated ATL range of small Solder tag transformers DESCRIPTION Small separating transformers with solder pin connections This range fulfils the requirements of control, safety and isolating transformers. Inrush currents and short circuit characteristics of ATL's transformers conform to up to date legislations and are compatible with all reputable manufacturers' switches breakers and magnetic release devices. All of our products are bespoke therefore voltages must be specified at enquiry stage. The transformers have protection against humidity and vibration. Our finger proof block terminals are shock proof and conform to BS EN & UL standards, other termination available please specify at enquiry stage. All of our transformers come complete with multiple footprints fixing centre's to enable a varied range of mounting configurations ref data sheet table. ** Click for more **