Inductive heating - Import export

The Super Seal™ Auto Junior semi-automatic induction cap sealer offers the benefits of high-quality induction sealing to start-up operations, product validation and short production runs. The Enercon hand-held cap sealers deliver reliable, repeatable induction sealing and feature quality aids such as batch counters and no-foil indicators, which are often only found on inline production machines. The quality, reliability, and safety and support of Super Seal™ Auto Junior is the same as our high-volume inline production machines. Our hand-held machines are virtually maintenance free and seal continuously time after time for many years without fault. • Fully adjustable table-top stand • Diameter 20-63 mm • Digital timer • Missing foil indicator • 500W output • Dimensions 17.8mm W x 30.0mm D x 38.0 cm H

The Super Seal™ Junior manual induction cap sealer offers the benefits of high-quality induction sealing to start-up operations, product validation and short production runs. The Enercon hand-held cap sealers deliver reliable, repeatable induction sealing and feature quality aids such as batch counters and no-foil indicators, which are often only found on inline production machines. Our unique coil design facilitates the sealing of a wide range of caps including flat, sauce dispensing and conical caps, at diameters from 15 – 150mm. Other hand-held devices will only seal flat caps. The quality, reliability, and safety and support of the Super Seal™ Junior is the same as our high-volume inline production machines. Our hand-held machines are virtually maintenance free and seal continuously time after time for many years without fault. • Handheld and portable • Cap size 15-150 mm • Batch and foil counter • Digital timer • Missing foil indicator • 1KW output

The Super Seal™ Max is the fastest inline sealer on the market, with a dual coil it’s designed for high-speed packaging lines running at up to 100 metres per minute. This dual coil air-cooled induction cap sealer offers increased power and a multi-language touch screen for a simpler operation. It delivers reliable sealing with a diverse operating window that compensates for cap, liner and container tolerance variations. • Multiple language selection • Easy to use touch screen • Supervisory password protection with operator lockout • Recipe management • Internal monitoring of all critical operating data • Container, cap and foil counters available • Local and remote start/stop and power control • Stainless steel IP55 enclosure • Remote network control and monitoring via RS485 or Ethernet • Robust stainless steel fully adjustable stand for different container heights • Seals a variety of caps ranging from 20mm – 150mm • Fully compliant with all CE regulations

This single coil induction cap sealer offers users increased productivity, an easier set-up and more control. The easy-to-use touch screen is available in multiple languages. The Super Seal™ Touch is our most powerful compact single-coil machine and is designed for production lines running at up to 40 metres per minute. The air-cooled power pack is separate from the induction sealing coil. • Pre-programmed and fully integrated touch screen control for inspection and rejection • Remote start/stop and remote power control (auto start function available) • Password protection with operator lockout • High and low level set power alarm • Recipe management • Internal monitoring of all critical operating data • Diagnostic system information • Internal USB data port – Network connectivity available • Stainless steel IP55 enclosure • Robust stainless steel fully adjustable stand for different container heights • Seals a variety of caps ranging from 20mm – 150mm

Available in three models Super Seal™ 300 Super Seal™ 400 Super Seal™ 600 We have built on the proven design of the Super Seal™ range of induction cap sealers, to bring new features to give more value to packagers. The new Super Seal™ compact induction cap sealers are available in three power levels. There are a variety of sealing heads available to optimise sealing performance for your specific applications. •New display simplifies setup, operation & troubleshooting •Local/Remote modes for start/stop & power level •Seals a variety of caps ranging from 20 – 150m •System settings in a single level menu •High efficiency plug-in induction sealing coils to maximise performance and minimise energy costs •Compact and air-cooled •Power supply electronics are housed in an IP55 enclosure •Fully compliant with all UK and European regulations •Fully adjustable stainless-steel stand for different container heights

The benefits of induction technology in a capless sealing process. Successful sealing on both capless and non-screw-cap containers such as snap on caps is now possible with a pressure Sealer incorporating an Enercon Super Seal™ unit. Typically, pressure belt sealing is used to replace conduction sealing or to reduce the dwell-time needed in conduction sealing. Seals are either placed onto the capless containers or reside in the cap as inserted by the cap manufacturer. The capped container is then guided through the induction heating tunnel, where downward pressure is applied to the clip-on cap or foil by a non-metallic recirculating belt. This unique design automatically takes account of component variations and tolerances, such as bottle height variation, product overfill, line speed variation and bottle centres. Incorporates an Enercon Super Seal™ unit • Cap sizes up to 110mm diameter • Conveyor Speed up to 40 metres / minute

Base Heaters provide a direct heat to the underside of the vessel, and can help heat drums, cylinders, IBCs and even small pots of paint and mastic. They can be used on their own, or together with a side heater to boost heat-rates and ensure a full melt of solid products. FARATHERM Induction Base Heater - Provides heat to the base of steel or plastic 205L drums and smaller containers. May be used individually, or with other LMK Heating products Uses the same technology as the proven Thermosafe Induction Heater Suitable for use in Zone 1 & 2 rated hazardous areas (ATEX and IECEx Certified) DIGIHEAT Base Heater - Provides heat to the base of 210 litre drums and smaller containers. May be used on its own, or with other LMK Heating products. Digital indicating thermostat standard For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

Petainer PET wide-mouth Jars are ideal for powdered products that require a scoop. Available in different shapes, sizes and colours, they increase your on-shelf presence and brand awareness. PET Jars are lighter than HDPE and glass alternatives, reducing your carbon footprint. They are easy to transport and deliver excellent top-load performance with an in-built stackable base design. Our jars have a smooth neck finish and are perfect for induction heat seal. They have a dedicated label area for branding opportunities and on the round shape it is recessed for added protection. Petainer wide-mouth jars can be supplied with handled or non-handled closures with the possibility of engraving the company logo. Petainer jars are strong and unbreakable. They have excellent impact resistance, which allows the safe transportation of consumables. PET will keep your product in perfect condition with barriers against moisture, UV and Light, maximising shelf life. Our wide-mouth jars are BPA free.

DIFHEMI - EXCLUSIVE AND MULTIFACETED Manufactured by Brascoelma and brought to you by the joint-venture, DIFHEMI heaters are high-technology equipment capable of heating any fluid by electromagnetic induction. The device operates on a different principle because in addition to being versatile, and making it possible to heat any type of fluid, it is non-pollutant, it does not generate useless energy losses, and it reduces operational and implementation costs, the heating process’s performance and efficiency being raised to up to 98%. It is the leader and, worldwide, it is the most-efficient product in existence exploiting the conversion of electrical energy to heat. HOW DO THEY WORK?Employing the principle of electromagnetic induction, DIFHEMI heaters generate heat through the magnetism created in the grain-oriented steel nucleus, the heat being transferred to the stainless-steel tubes through which the fluids circulate.

Q: What are DIFHEMI inductive fluid heaters? A: DIFHEMI inductive fluid heaters (DIFHEMI is an acronym of ‘direct fluid heating by electromagnetic induction’) are of leading-edge innovative technology which is the sole property of Brascoelma; they belong to a new generation of fluid heaters which are unparalleled worldwide. They are currently the most-efficient equipment and heat any type of fluid, directly or indirectly, liquid or gaseous, at the desired temperature, flow rate and pressure. They utilise electromagnetic induction to generate heat and do not require electrical resistances of any kind, nor the use of fossil fuels. DIFHEMI inductive fluid heaters have permitted realising heating projects which would otherwise be non-viable, and since 1983 over 300 companies have used them. They have been found to be more advantageous than systems utilising resistance heating, fuel oil or natural gas, due principally to the inefficiency inherent in these latter systems of heat generation