Greases - Import export

Whether mineral or synthetic-based, conventional or special greases Lubcon offers the right high-performance grease for your application.

Accu-Greaser 18 V Standard-S-LS Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridge, according to DIN 1284, item features: - LCD battery level display and LED overload indicator - Li-Ion battery 18V - 1500mAh - standard wide range input charger (100 -240 V/ 50-60 Hz), - overload protected (charging time approx. 60 min.) - max. delivery 115 ccm per min. - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high-pressure safety rubber-hose (1.650 bar b.p.), length 750 mm, - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied Version comes with grease barrel for 400 g pull-off cartridge AND cartridge protection tube for 400 g cartridge The filling and venting nipple must be replaced by the plug when using screw-top cartridges to make the vacuum principle work ! Part No. 34 279 00

Low temperature grease with very good wear protection, high carrying capacity, high metal affinity and long service life at negative temperatures to -54 °C.

Hydraulic Grease Nipples. Case hardened, zinc plated and passivated for resistance to corrosion.

Snaps on to standard hydraulic couplers. Slide down sleeve to keep attached. Slide up sleeve to release. Threaded 1/8” BSPF to fit a range of tubes and hoses Part No. 54-2089

Due to the superior structure of the calcium sulphonate complex thickener, these H1-certfied greases provide excellent mechanical stability. Thus, the grease is able to provide high performance under extreme operating conditions, even when being constantly exposed to water or humidity.

For use with ‘tat-head’ and industrial ‘round-head’ hook-on grease nipples. Fits nipples with a 15-16mm head. Thread 1/8” BSP Part No. HOC1

Hydraulic Grease Nipples. Case hardened, zinc plated and passivated for resistance to corrosion. Hydraulic - 90° Angle Type

Case hardened, zinc plated and passivated for resistance to corrosion

Hydraulic Grease Nipples. Case hardened, zinc plated and passivated for resistance to corrosion.

Thread 1/8” BSP Male/Male Tapered Fitting Part No. MN22

Enables standard delivery tubes to be used with old style Tecalemit Hand Compressors. Thread 1/4” BSP / 1/8” BSP Female Part No. AN42

Enables standard delivery tubes to be used with old style Tecalemit Hand Compressors. Thread 1/4” BSP / 1/8” BSP Female Part No. AN42

Used to join delivery tubes together. Thread 1/8” BSP Female/Female Part No. S22

Recommended for use when using flexible delivery tubes. Fitted between the grease gun and the hose, its swivel action prevents kinking. Particularly useful for positioning on to hook-on nipples. Thread 1/8” BSP Part No. RC1

For Old Style Bayonet Grease Nipples. Thread 1/8” BSP Part No. BC1

For Damaged Grease Nipples of all types. The pointed end of the connector is used to deflect the ball in the grease nipple thereby permitting the injection of grease. Thread 1/8” BSP Part No. CC1

Side Lever Grease Gun with Pressure Gauge For 400 gr. Cartridges or 500 gr. Bulk Fill, Metered Output, Permanent Spring Load Design, Filler Nipple/Air Release Valve, Ergonomic Hand Grip. fitted with Pressure Gauge (0 - 400 bars)

High-performance greases based on synthetic hydrocarbons and ester oils with aluminium complex soap. They show a high load carrying capacity, good wear protection and are especially suitable in high-temperature applications.

Hydraulic safety-coupler safeLOCK Precision made - with hardened 4-jaws made of tool steel - with high-performance hydraulic-gasket - with integrated linear-swivel - uncoupling at more than 600 bar is possible - no spurt / mess when uncoupling - outer diameter according to DIN Part No. 32 455 04

Mato Lubrication Kit E480 contains: - Grease Gun E500, - Universal adaptor, - Steel Tube E4024, - extra safe rubber hose, - supplied with 4 jaw hydraulic coupler, - Rigid tube for driveshaft F4020, each with a snap-on coupling. Rigid tube with slide-on connector, Conical and Universal connector. Supplied in carry case.

Hydraulic safety-coupler safeLOCK 1/8" BSP (32mm Standard) Precision made: - with hardened 4-jaws made of tool steel - with high-performance hydraulic-gasket - with integrated linear-swivel - uncoupling at more than 600 bar is possible - no spurt / mess when uncoupling - outer diameter according to DIN Part No. 32 456 03

High-load, high-speed and high-temperature greases based on perfluorinated polyether and ester oils with lithium special soap thickener for low speeds in conjunction with high mechanical and thermal loads.

Simple, fast and secure shoulder strap ensuring easy and comfortable operation of the battery driven grease gun

High pressure safety hose ø 13mm, burst pressure 1,650 bar (double steel wire braided

Accu-Greaser 18 V Professional-S-LSP Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridges, according to DIN 1284, item features: - LCD battery level and LED overload indicator - Li-Ion battery 18V - 4000 mAh - multi purpose wide range input charger (12 -240 V/ 50-60 Hz), - overload protected - charging time approx. 100% in 100 min. / 80% in 50 min.) - max. delivery 115 ccm per min. - 12-24 V cord for vehicle power supply, - shoulder strap - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high pressure safety rubber-hose (1.650 bar b.p.), length 750 mm - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied - adaptor for LS 500 style cartridge Part No. 34 280 75

Accu-Greaser 18 V Professional-S-LS Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridges, according to DIN 1284, item features: - LCD battery level and LED overload indicator - Li-Ion battery 18V - 4000 mAh - multi purpose wide range input charger (12 -240 V/ 50-60 Hz), - overload protected - charging time approx. 100% in 100 min. / 80% in 50 min.) - max. delivery 115 ccm per min. - 12-24 V cord for vehicle power supply, - shoulder strap - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high pressure safety rubber-hose (1.650 bar b.p.), length 750 mm - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied Part No. 34 279 62

Accu-Greaser 18 V Professional-S Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridges, according to DIN 1284, item features: - LCD battery level and LED overload indicator - Li-Ion battery 18V - 4000 mAh - multi purpose wide range input charger (12 -240 V/ 50-60 Hz), - overload protected - charging time approx. 100% in 100 min. / 80% in 50 min.) - max. delivery 115 ccm per min. - 12-24 V cord for vehicle power supply, shoulder strap - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high pressure safety rubber-hose (1.650 bar b.p.), length 750 mm - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied Part No. 34 276 65

Accu-Greaser 18 V Premium-S-LSP Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridges, according to DIN 1284, item features: - LCD battery level and LED overload indicator - Li-Ion battery 18V - 1500mAh - multi purpose wide range input charger (12 -240 V/ 50-60 Hz), - overload protected (charging time approx. 100% in 40 min. / - 80% in 20 min.) - max. delivery 115 ccm per min. - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high pressure safety rubber-hose (1.650 bar b.p.), length 750 mm - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied - adaptor for LS 500 style cartridge Part No. 34 280 44