Results for
United Kingdom
Heavy duty 10mm backing strip filled with 3mm & 4mm filaments. Perforated & Multi-Tooth backing strip available for extra security. Filaments can be a mixture of different diameters to offer a dual action for particular cleaning and sealing purposes, or a mixture of wire and polymer to create a scraping and cleaning action..
Request for a quoteUnited Kingdom
Inpregnated filaments have a wide variety of usage and are readily available to suit many applications. Enquire for assistance & recommendations.
Request for a quoteUnited Kingdom
Product Features: • Universal primary with taps for 100, 120, 220 or 240 VAC, 50/60 Hz. (Except the 260A6 which is 117V, 50/60 Hz. only). • Designed for preamps, low power amps, general replacement, test equipment, etc. • Economical, open frame, chassis mount - two hole (.187 dia. = G) channel bracket (figure #1) or four hole mounting (figure #2). • Units include a Faraday shield between the primary and secondary windings. • The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries. • Minimum 5" long leads.
Request for a quoteUnited Kingdom
Product Features: • Primary 115 VAC, 60 Hz. • All secondaries center tapped, VAC (RMS). • Enclosed, 4 hole chassis mount. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot of 2,000V RMS. • UL listed (#E50394) and CSA certified (209651).
Request for a quoteUnited Kingdom
Product Features: • Primary 115 VAC, 60 Hz. (Except 261D6 and 261GE6 which are 115/230 50/60 Hz.) and (265EES which is 120/240, 50/60 Hz). • Designed for small power or bias supplies, test equipment, preamps etc. • Models 261C6, 261D6, 261E6 and 261G6 can also be used with full wave C.T. rectifiers. • Economical, two hole, channel bracket, chassis mount. • Minimum 5" long leads. • Convenient 6.3 or 12.6 volt filament/auxiliary winding.
Request for a quoteUnited Kingdom
Product Features: • A perfect match to the 1650P Series Potted Output transformers. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Mounting hardware included. • Primary: Universal - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Finish: Black powder paint to match the 1650P Series of potted output transformers. • Units can be run full wave bridge or full wave C.T. • c UL us recognized (E207860).
Request for a quoteUnited Kingdom
Product Features: • Primary: Universal - 100, 110, 120, 200, 220, 230, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number 379WX - uses a separate 60VAC 0.2 Amp winding). • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Models: This series is an upgrade from the entire 200 Series range of units PLUS 2 models designed specifically for 300B tubes (Part number 300BX) and 2A3 tubes (Part Number 302AX). • Finish: Black powder paint to match the 1650 Series of output transformers • Units can be run full wave bridge or full wave C.T. • Conservative designs - CSA certified (209651).
Request for a quoteUnited Kingdom
Product Features: • Primary 115 VAC 60 Hz. - except as noted. • Enclosed, 4 hole, chassis mount. • Minimum 6" long leads. • Units can be run full wave bridge or full wave C.T. • Class A insulation (105°C). • Hi-Pot test of 2,000V RMS. • Conservative designs - CSA certified (209651). • Note: A production "running change" has been made to the primary winding - effective with August 2009 production.
Request for a quoteUnited Kingdom
Product Features: • Primary 117/234 VAC, 50/60 Hz. • All units have dual secondaries except 266LA25 (C.T. secondary only). • Secondaries can be used as; a center tapped secondary, parallel connectors or used individually (except 266LA25). • Units are designed for use with all windings engaged. • Open style. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • We use Class B insulation (130°C) for extra protection - UL listed as a Class A (105°C) design. • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (209651).
Request for a quoteUnited Kingdom
Product Features: • 117/234 VAC - 50/60 Hz. dual primary. • Secondaries are either center tapped (C.T.) or dual secondaries for added versatility. • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).
Request for a quoteUnited Kingdom
Product Features: • 115 VAC - 60 Hz. single primary. • All secondaries are center tapped (C.T.). • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).
Request for a quoteUnited Kingdom
Product Features: • Economical single primary 115 VAC, 60 Hz. (or 117 50/60 Hz.). • Most secondaries are center tapped (C.T.) VAC (RMS). • Open style, channel bracket, two hole chassis mount. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • We use Class B insulation (130°C) for extra protection - UL listed as a Class A (105°C) design. • Hi-Pot test of 2,000V RMS. • UL listed. • CSA certified.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
United Kingdom
Dual-purpose non slip floor tiles with two strips suitable for low light conditions. In low light conditions where things are still visible, the reflective strip will reflect light and help attract the eye of any people close by, warning of potential hazards such as ledges or steps. In low light conditions where visibility isn’t very good at all, or even in power outs, the glow in the dark strip will help guide people, whether down walkways or warning or ledges and steps, helping to maintain efficient safety levels at all times. If you would like to enquire or order, please contact the sales team by phone, Live Chat or the contact us form on the website.
Request for a quoteUnited Kingdom
Glow Line is an ingenious product, we use our photoluminescent Egress tape as the centre line then surround that by our black standard safety-grip coating, as we use a thinner line of Egress tape this lowers our production costs as we use less of the precious photoluminescent product. The centre glow in the dark stripe is 10mm wide, with the black either side being 20mm each making the entire width a very popular 50mm. The use of two contrasting colours creates a highly visible effect, perfect for highlighting. Other widths and stripe formats can be offered but we would need to discuss MOQs ( Minimum Order Quantities ) to realise this.
Request for a quoteUnited Kingdom
Anti-slip that can be applied in awkward shaped rooms, or even on ledges or steps that are prone to low light conditions, helping to guide people safely, preventing mis-steps, falls and injuries. By piecing dual-purpose anti-slip tiles together, you can achieve efficient slip prevention, without having to cover the entire surface. If you would like to enquire or order, please contact the sales team by phone, Live Chat or the contact us form on the website.
Request for a quoteUnited Kingdom
The hazard stripe warns of potential dangers, while the glow in the dark strip helps during low light conditions. By orientating the dual purpose anti-slip tile, you can achieve maximum efficiency and safety. Applying these non-slip floor tiles on ledges or steps helps to pronounce the existence of the ledge or step, helping people stay safe, even in low light conditions. If you would like to enquire or order, please contact the sales team by phone, Live Chat or the contact us form on the website.
Request for a quoteUnited Kingdom
Our H8101C glow in the dark directional tape is a chevron patterned photoluminescent egress tape with excellent glow in the dark properties. The product has endless applications but the directional arrow markings combined with the glow in the dark properties can highlight exits, egress points, access routes and provide guidance down walkways and towards the aforementioned areas. The directional egress tape produced is a midway point between our standard egress and high-quality egress marking tape in terms of glow performance. The photoluminescent standards are excellent providing approximately 4~6 hours of glow based on a standard charge. This allows us to provide another level of glow in the dark tape, in terms of performance and price.
Request for a quoteUnited Kingdom
Egress tape is the term used to describe a smooth photoluminescent (glow in the dark) marking tape. Photoluminescent tape is constructed from a conventional self-adhesive plastic base film impregnated with photoluminescent powder. The material is charged by natural or artificial lights when the lights dim the product instantly displays a bright light.
Request for a quoteUnited Kingdom
Egress glow in the dark hazard marking tape is a further development of our plain colour Egress tape. One slight disadvantage of a conventional photoluminescent egress tape is that the plain colour is not the most vivid, during daylight it is a conventional mild green colour. With the modification of creating black chevrons running at 45° angles throughout the length of the material it then effectively creates a much more visible product that is far more noticeable. During either natural or artificial lighting, photoluminescent hazard tape has a mild green shade yet when the lights go out it glows bright green. The black chevrons do not glow and remain the same colour in any lighting situation. Egress hazard tape is perfect for applying on stairs, walkways, access areas, exits etc.
Request for a quoteUnited Kingdom
Our first non-abrasive glow in the dark antislip tape has benefitted from new technology that allows us to prolong the luminance of our material, meaning it will stay brighter in a lights out situation, for longer. High-quality glow in the dark antislip tape is the first in new, unique innovations in our photoluminescent products. High-quality glow in the dark antislip tape is suitable for many applications, particularly for internal areas such as stairways and walkways which are used as specific exit routes, wherein a lights out situation, the exit is clearly indicated, even from rooms higher up in a building.
Request for a quoteUnited Kingdom
Glow in the dark hazard anti slip tape is a simple variation of our glow in the dark antislip tape. Printed chevrons on top give an extended purpose in allowing it to serve as a warning tape in any lighting condition also. Afterglow performance is highly visible due to two levels of photoluminescent coating: • The plastic liner is photoluminescent. • The flexible resin that allows the grit to hold
Request for a quoteUnited Kingdom
Heskins first produced (photoluminescent) glow in the dark antislip tape in 1998. Back then we thought it was novel and would be of limited interest, there was nothing else similar. How wrong we were, it is now a very popular material. To ensure that our glow in the dark grip tape is highly visible and effective it possesses two separate levels of photoluminescent coatings.
Request for a quoteUnited Kingdom
Heskins welcome heavy-duty bonding tape to its already vast range. This wonderful creation is a double tape used to bond or mount materials together. This is fashioned from a durable acrylic foam, with a pressure-sensitive adhesive, both of which are solvent-free, which is applied to both sides. This generates a solid bond before reaching full adhesion in roughly three days.
Request for a quoteUnited Kingdom
Heskins anti corrosion tape is available to be applied between two metals to prevent galvanic corrosion.
Request for a quoteResults for
Filament - Import exportNumber of results
54 ProductsCountries