Electronic components - Import export

We have over 10 Million Lines of Components in our Supply. Contact me on liamm@merefields.com

BOSCH TERMINALS AVAILABLE ON OUR STOCK LIST Please send me an enquiry via liamm@merefields.com or enquires@merefields.com 

At Merefields Electronics we have built a network of suppliers and manufacturers to provide our customers with total electronics distribution. Our Electro Mechanical product range includes Electronic Components and we support key manufacturers such as Schrack, Apem, Binder, Omron and many more. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

Miniature cylindrical crystal with AT-CUT strip crystal priding low mass with small size. Frequency range 3.579MHz to 70MHz. Frequency range 3.579MHz to 70.0MHz Fundamental mode to 30MHz Low mass, miniature cylindrical package

The ultra-miniature 32.768kHz CXOXULP oscillators use an AT-Cut crystal for tight stability and also have a low current consumption, typically 15µA. A fast start-up time (15ms) and tight frequency stability (±30ppm to ±100ppm) over a wide temperature range. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consumption (typically 15µA) Fast start-up (typically 15ms) Tight Tolerance High Shock Resistance Low Ageing Full military testing available

CXOQ oscillators are ultra-miniature, surface mount units packaged in a 2.50 x 2.00 x 0.89mm package. The oscillators are capable of withstanding high shock environments. The design and build standard including availability of full 'MIL' testing ensures great reliability. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. High shock survivability High frequency stability Low acceleration sensitivity (HG version) CMOS and TTL compatible Low power consumption Full military testing per MIL PRF 55310 available Optional enable/disable Low EMI emission Hermetically sealed ceramic package

CXOMK oscillators are miniature, surface mount units packaged in a 6.5 x 5.0 x 1.5mm package. Ultilizing the latest advancements in production technology, the CXOMK oscillator is capable of achieving close tolerance frequency calibration and high stability over a wide temperature range. High shock resistance. The part is available with full 'MIL' testing if required. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. CMOS/TTL Compatible High shock resistance Optional Enable/Disable with Tri-State Low EMI emission Full military testing available Hermetically sealed package

CXOL oscillators are ultra-miniature (32. x 1.5mm), ultra-low current quartz crystal oscillators with a typical start-up time of 200ms. Hermetically sealed in a highy reliable ceramic housing, these oscdillators are available over a wide range of input voltages (1.2V ~ 5.0V). This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consiumption Typical start-up time of 200ms Typical Rise/Fall times of 25ns Hermetically sealed ceramic package Optional output enable/disable with Tri-state Full military testing per MIL PRF 55310 available Supply 1.2 to 5.0V Enable/Disable included

CX18SM crystals are designed for applications where miniaturization is paramount. The rugged crystal is ideally suited for a wide variety of high frequency applications including medical electronics, cardiac rhythm management, pacemakers for example. Also auitable for cochlear implants, infusion pumps and wildlife tracking. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Ultra-miniature SMD package 1.55 x 0.95 x 0.35mm Frequency Range 30MHz ~ 100MHz High shock and vibration resistance Hermetically sealed Available with glass or ceramic lid Tight calibration tolerance Custom designs available

CX11SM crystals are leadless devices designed for surface mounting on PCBs or hybrid substrates. The crystals have very small outline and low-profile and are suited for all low frequency applications. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details Frequency Range 32.768kHz and 100kHz to 180kHz High shock resistance Ultra-small ceramic package Low ageing Designed for low power applications Full MIL testing available

CX11LHG crystals are high performance devices designed to survive extreme shock and high vibration environments. Low acceleration sensitivity and low ageing performance are coupled with tight calibration and temperature tolerances. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details CH11LHG crystals are designed for extreme environments. This crystal is ideal for use where extreme mechanical shock occurs.

A surface-mount crystal with the same base outline as HC49. A low-cost part ideal for volume applications. Different height parts are available: 49USMXL height = 3.2mm max and 49USMX height = 4.2mm max Frequency Range: 3.2MHz to 70.0MHz Low cost crystal for mass market applications Surface mount version of HC49-4H crystal Comprehensie stockholding of standard frequencies Customized parts readily available Industry-standard package Low-profile versions available

A HC49 crystal with formed leads and clip for SMD application. Available in fundamental and 3rd, 5th 7th and 9th overtones. Close tolerances and specifications available. Low-cost, industry-standard crystal unit formed for SMD Available with close tolerances Frequency range 1.0MHz to 200MHz Specifications fully customisable

CX11SM crystals are designed for applications requiring very small footprint and low profile (<1.0mm). Using micro-machining processes this hermetically-sealed crystal ensures high stability and low ageing. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Designed for infrared, vapour phase or epoxy mounting Low profile, (<1.0mm) hermetically sealed ceramic package Excellent ageing characteristics High shock and vibration resistance Full military testing available Available with glass or ceramic lid Custom designs available

CX9HT crystals are designed for applications requiring very small footprint and low profile (<1.0mm). Using micro-machining processes this hermetcally-sealed crystal ensures high stability and low ageing. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Designed for infrared, vapour phase or epoxy mounting Low profile, (<1.0mm) hermetically sealed ceramic package Excellent ageing characteristics High shock and vibration resistance Full military testing available Available with glass or ceramic lid Custom designs available

CX9VSM crystals are leadless devices designed for surface mounting on PCBs or hybrid substrates. The crystals have a very low-profile (<0.94mm) and are suited for all low frequency applications. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Frequency Range 32kHz to 160kHz High shock resistance Ultra-small ceramic package Low ageing Designed for low power applications Full MIL testing available

Produced in our UK factory this qualified oscillator offers a 500G shock rating and good phase noise

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Designed for general purpose or replacement use in push-pull or phase inverter tube driver circuits. • Should not be used for single ended applications. They have no gap for DC bias current present in SE mode. • Open style with minimum 5" long primary leads. • Minimum frequency response 150 Hz. - 15 kHz. (+1 /- 3db) @ 1 kHz. • Part number 124B is the same as 124A except for 49% Nickel laminations for greater fidelity. • Part number 124C is the COIL ONLY.

Product Features: • Designed for push-pull tube output circuits. • Units are designed to provide ample "headroom" at bass frequencies (note the weight of each transformer). • All models have a secondary tapped fro 4, 8 or 16 ohm outputs. • Enclosed (Shielded), 4 slot, above chassis Type "X" mounting. • Manufactured with plastic coil forms for coil support and insulation. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. The 1650G does NOT have primary screen taps and will not support "Ultra Linear" applications.

Product Features: • "Over designed" for high fidelity, single ended, Class-A, tube output circuits (triode, tetrode or pentode tubes). • Enclosed (shielded), four slot, chassis Type "X" mounting. • Frequency response at least 20 Hz. to 20 Khz. at full rated power (+/- 1 db max., ref. 1 Khz). • Insulated flexible leads 8" min. • For maximum versatility, all units (except the 1642SE and 1638SEA do NOT include this screen tap as they were designed principally for high impedance triode tubes. • High quality laminations, (M6) grain oriented silicon steel. • Core is gapped to reduce core saturation in Class-A tube amplifier circuits.

Product Features: • Enclosed, 4-hole mount chokes (some models also available epoxy potted in a black powder paint - drawn steel housing. Potted models mount with 1/4" - 20 hardware (included). • Tolerance of 15% on both inductance and resistance. • Inductances measured at rated D.C. current. • Minimum 8" long leads. • Units will exhibit less inductance at slightly higher currents or more at lower currents. • Perfect for high voltage power supply filtering, case matches power transformers and tube audio output transformers. • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation. • Operating temperature range is -40C to 85C. • Proper Henry testing requires an LCR meter in junction with a 25A power supply that does allow for DC bias as well a higher applied AC drive voltage to meet the test specifications.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Moulded powdered iron core. • All chokes include vinyl insulation cover. • 1.25" long leads (+/- 0.1"). • High inductance and high current. • L measured at 7.9 Mhz. on 1536D, E and F all others at 1 Khz.

Product Features: • Large ferrite core for extended saturation point, optimum frequency range .01-2 Mhz. • 1.5" long leads (+/- 0.1"). • Test frequency 1 Mhz. • Core length 1.25". • Coil is covered with vinyl insulation shrink sleeve. • Operating temperature -55°C to +135°C.

Product Features: • High saturation flux density ferrite rods. • 1" long leads, tinned to within 1/8" of body. • Ideal for filtering or energy storage inductors. • Inductance measured at @ 1 Khz. with 0 amps. D.C. current, typical inductance change is less than 5% @ twice rated current. • Ambient temperature range -60C to +85C.

Product Features: • Perfect for high frequency filtering applications. • High permeability core ideal for applications under 50 kHz. • High self-resonant frequency values. • Operating Frequency: 60Hz. - 10kHz. • Some models feature universal channel mount packaging with flexible insulated leads (6" min.). • Some models feature rugged construction with aluminium base and stainless steel band along with open-style terminals for maximum versatility.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required. • World wide applications, 50 or 60Hz. operation, step up (115VAC to 230VAC). • Input is circuit breaker protected. • Hi-pot tested to 2 KV RMS. • Input is a standard 3-wire, grounded plug (can also be used with adaptors for proper grounding). • Input is connected to a 5 foot cord and standard grounded North American plug (NEMA 5-15P). • Output - Due to U.L. changes in 2007 - New production with the European (Shuko) parts would no longer by U.L. listed. Therefore, Hammond replaced this output receptacle with a one foot long "pig tail" cord with a standard North • American 3-wire, 250V receptacle (NEMA 6-15R) for any production after the first part of 2008. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.