Electric controls - Import export

WE SUPPLY A WIDE RANGE OF ELECTRIC MOTORS WE HAVE OVER 10MILLION LINES OF COMPONENTS IN OUR SUPPLY. PLEASE SEND liamm@merefields.com FOR QUOTE REQUESTS

Versatile and attractive boxes in ABS with a matt finish. Their rugged yet simple features make them unobtrusive and ideal for domestic, commercial and office applications. The lid is retained by 4 self tapping screws which can be inserted from either side and can be hidden by the matching plastic covers provided. Integral stand offs are provided in both halves of each box and PCB slots in AB77, AB78 and AB88. Standard colours are black and white but other RAL colours are available on request.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Aluminium allow to BS1490, LM2M - supplied in natural finish. • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998. • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance. • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head). • Countersunk lid holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Available in natural vibra finish OR in light textured, black powder paint. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance. • Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed. • M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes. • Designed to meet IP54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available. • All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262.

Product Features: • Very economical - thick wall - diecast aluminium - watertight electronic instrument enclosure. • Rugged, diecast aluminium alloy (tough - yet easy to machine). • Two piece "tongue and groove" construction for protection against access of dust and water. • Ideal for repetitive opening and closing. • Easy to wall mount using "through box - blind hole" construction (on all sizes except: 1550Z102, 1550Z115 and 1550Z120). Access to blind holes is outside of gasket ring for superior protection. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside and out). • Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws - into factory tapped holes.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket. Gasket is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Factory powder coated to save stomp box manufacturers and experimenters time and money. • Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining. • Smooth finish allows for easy adhesion of labels and/or silk screens. • Colours are matched to standard RAL colours. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Designed to meet IP54. IP65 rating available, but this also requires water-tight screws. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • High impact strength, zinc diecast alloy (tough - yet easy to machine), electronic instrument enclosure. • Zinc material also offers easy ability to plate the enclosure. • Zinc material is soft and easy to machine and offers a heavier weight alternative (over double) to the 1590 diecast aluminium enclosures. • Zinc diecast enclosures provide extra coolness to the touch and add perceived premium quality weight to your product. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Enclosure is vibra finished for a smooth surface with no sharp edges. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. • Four (or six in the1590K432) M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid - into factory tapped holes.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Four 6-32 x 1/2" machine screws secure lid - into factory tapped holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Two piece "tongue and groove" construction with a replaceable one-piece silicone rubber gasket provides protection against access of dust and water. Gasket supplied loose inside the enclosure (not pre-installed). • Gasket has a temperature rating of -40C to +150C. • Ideal for repetitive opening and closing. • Four recessed stainless steel machine screws secure lid into tapped holes. • Easy to wall mount using "through box - blind hole" construction, outside of gasket protection. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). Note: Except for 1590Z060, 1590Z061, 1590Z062 and 1590Z063. • Designed to meet IP68. • North American Mark of Safety - cUL and UL listed. Certified to Type 4, 4X, 6, P.

Product Features: • Ideally suited for vertical mounting of printed circuit boards; internal side walls included moulded in card guides. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP45. • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Smooth black finish with black screws.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Attractively styled and ergonomically designed for use as a "Hand-Held" instrument enclosure. • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Recessed top for membrane display or pad. • Lap joint construction provides protection against dust accumulation and splashing water. • Extra deep top and ultra shallow base are specifically designed to enhanced the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Lid is secured with Philips machine screws, threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models are adaptable to a wide selection of Arduino's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Arduino boards are not included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Boards are not included.

Product Features: • Moulded in a choice of general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models feature either dual camera mounts (inside or outside) OR a touch screen mount. • Enclosure top and bottom halves snap together. • Includes four (4) self adhesive rubber feet and instruction sheet. • Development boards, cameras, and touch screens are NOT included.

Product Features: • Low profile - ergonomically designed for a comfortable fit into the user's hands. • Perfect for instrument or mobile data enclosures requiring a touch screen. • Choice of three sizes. All available with or without battery compartment. • Moulded from flame retardant ABS plastic, choice of black or grey - material carries a UL flammability rating of 94V-0. • Enclosure is assembled with six (6) - M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into the top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. • P.C. board standoffs are moulded into case top and bottom halves.

Product Features: • The Clipper Series is a British-designed hand held enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards for use in hand held applications. • Ergonomically styled for a secure and comfortable grip. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with top and bottom, removable front panel, battery door (except on the smallest size) and three self tapping screws. • The top panel has a flat display area, perfect for labels, silk screening, membrane keypads or easily machined. • The base is moulded with bosses for easy P.C. board mounting. • The removable end panel is securely clamped by the two box halves and easily customised or replaced by an infrared panel. • Battery compartment (except on the smallest size) suitable for a 9V (PP3) battery. Battery clip not included.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Front and rear panels are integral part of bottom unit. • Moulded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M4 x 0.7" (14mm) slotted machine screws (included) threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four M3 x 0.276" (7mm) self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the bottom is a smooth dark grey (RAL 7012)

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Two piece construction. Integral card guides accept 1.5mm (0.062") P.C. cards. 0.20" diameter stand off bosses in the base for supporting various subassemblies. • Integral brass bushings with four M3 x 0.5" x 8mm (0.31") Philips pan head screws hold recessed panel into sloping front of case. • 1.01mm (0.04") aluminium panel with paper on one side. • Four self-adhesive feet included. • Stocked in black and grey.

Product Features: • One piece moulded construction - no lid. Designed for potting box applications. • Moulded from black general purpose ABS plastic with a flame rating of UL94-HB. • Temperature rated -20°C to +94°C. • 1.0mm (0.04") wall thickness except for 1596B103 (0.8mm).

Product Features: • Moulded in ABS plastic. • Unique rounded sided - two piece moulded construction. • Top and bottom "snap" together. • Includes moulded in keyhole knockout areas (2) for mounting either vertically or horizontally. • Bottom half includes 6 moulded in, P.C. board standoffs.

Product Features: • Desktop electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Integral horizontal P.C. card mounts on Eurocard centers. • P.C. card standoffs moulded into top and bottom half of enclosure - require #6 x 1/4" (6.4mm) screws - part number 1598ATS100.

Product Features: • Attractively styled and ergonomically designed for use as a "hand-held" instrument enclosure. • Standard version is moulded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings. • Economy version is moulded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts. • Recessed top for membrane display or pad. • Lap joint construction provides protection against access of dust and splashing water. • Extra deep and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting installation.

Product Features: • Rear of unit contain one or two (depending on console size), flat removable panels for easy modifications. • Standard versions are moulded from flame retardant ABS plastic. Material carries a UL flammability rating of 94V-0. • Economy version is moulded from general purpose (not flame retardant) ABS plastic. • Includes 4x black rubber feet per enclosure. For replacement packs of 24 feet, see part number 1421T2.