Assembly and disassembly - Import export

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include one horizontal row of louvers for ventilation. • Choice of sloping or vertical sides by reversing case. • Includes an handle (Part number 1427C1) and holes in the top for mounting. Also includes plastic plugs if handle is not desired. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware. • Assembled with 8 machine screws into weld-nuts for repetitive assembly and disassembly.

Product Features: • Ideally suited for vertical mounting of printed circuit boards; internal side walls included moulded in card guides. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP45. • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Smooth black finish with black screws.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Front and rear panels are integral part of bottom unit. • Moulded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M4 x 0.7" (14mm) slotted machine screws (included) threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four M3 x 0.276" (7mm) self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the bottom is a smooth dark grey (RAL 7012)

Product Features: • Uses all machine screw and PEM nut construction, perfect for applications where repetitive assembly and disassembly are required. • Light weight design - all aluminium, type 5052 H32 for easy modification. • Strong design construction using: • 0.125" (3.2mm) thick - side panels and rack mount brackets • 0.064" (1.6mm) thick - front and rear panels • 0.062" (1.6mm) thick - top and bottom panels • Can be used with or without rack mounting "ears" or brackets (included). • Enclosure is finished in rugged, satin texture, black powder paint. • Includes top, bottom, side panels, front and rear panels, rubber self adhesive feet, rack mount brackets are all hardware. • Pull handle accessory kit available. • Easy access to inside, only 4 screws need to be removed from any of the 6 panels for internal access. • Internal aluminium chassis panel is optional. • Knockdown design ships unassembled for easy handling and shipping protection.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Attractively styled and ergonomically designed for use as a "Hand-Held" instrument enclosure. • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Recessed top for membrane display or pad. • Lap joint construction provides protection against dust accumulation and splashing water. • Extra deep top and ultra shallow base are specifically designed to enhanced the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Lid is secured with Philips machine screws, threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.

Product Features: • Low profile - ergonomically designed for a comfortable fit into the user's hands. • Perfect for instrument or mobile data enclosures requiring a touch screen. • Choice of three sizes. All available with or without battery compartment. • Moulded from flame retardant ABS plastic, choice of black or grey - material carries a UL flammability rating of 94V-0. • Enclosure is assembled with six (6) - M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into the top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. • P.C. board standoffs are moulded into case top and bottom halves.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Ergonomically designed for a comfortable fit into the user's hand. • Choice of two sizes, in two versions (with or without battery door) - in two colours (black or grey). • Perfect for instrument or mobile data enclosures requiring a keypad and display. • Both the display and keyboard areas are recessed for membrane devices. • Moulded from flame retardant ABS plastic, choice of black or light grey - material carries a UL flammability rating of 94V-0. • Handheld section of enclosure includes a dark grey overmould, soft plastic grip. • Enclosure is assembled with M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.

Product Features: • Ergonomically designed for hand-held comfort. • Designed to meet Ip65. • Uses a one piece silicone gasket (installed). Enclosure utilized tongue and groove construction - moulded into the top and bottom halves. • Choice of three sizes - in two colours. • Moulded in flame retardant - ABS plastic (FRABS) - UV stabilized. With a grey overmould, soft plastic grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into both the top and bottom of the enclosure. Standoff screws (M2) are not included. • Front panel is an integral part of the top half of the enclosure. • Choice of two enclosure colours, light grey or black - soft side "grip" plastic colour is grey. • Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.

Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.