Brass bushings - Import export

(A) Counter Balanced - spring loaded lift mechanisms. (B) Complete leg assembly – Trip-Free© legs with new, segmented leg connector bar (patent pending). Complete with all hardware and fittings to completely assemble the cabinet, install the mechanisms, and install leg assembly. Complete, easy to follow, step-by-step instructions. 18-page manual includes cut lists and assembly instructions for single/twin, double/full and queen beds. Our mechanisms are some of the most heavy-duty in the wallbed Industry. The larger rivet mounted in lubricated brass bushings make this mechanism the strongest and most reliable it could be. Steel protective covers (not plastic) ensure years of safe operation.

Product Features: • Ergonomically designed for a comfortable fit into the user's hand. • Choice of two sizes, in two versions (with or without battery door) - in two colours (black or grey). • Perfect for instrument or mobile data enclosures requiring a keypad and display. • Both the display and keyboard areas are recessed for membrane devices. • Moulded from flame retardant ABS plastic, choice of black or light grey - material carries a UL flammability rating of 94V-0. • Handheld section of enclosure includes a dark grey overmould, soft plastic grip. • Enclosure is assembled with M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.

Product Features: • Low profile - ergonomically designed for a comfortable fit into the user's hands. • Perfect for instrument or mobile data enclosures requiring a touch screen. • Choice of three sizes. All available with or without battery compartment. • Moulded from flame retardant ABS plastic, choice of black or grey - material carries a UL flammability rating of 94V-0. • Enclosure is assembled with six (6) - M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into the top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. • P.C. board standoffs are moulded into case top and bottom halves.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Front and rear panels are integral part of bottom unit. • Moulded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M4 x 0.7" (14mm) slotted machine screws (included) threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four M3 x 0.276" (7mm) self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the bottom is a smooth dark grey (RAL 7012)

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Two piece construction. Integral card guides accept 1.5mm (0.062") P.C. cards. 0.20" diameter stand off bosses in the base for supporting various subassemblies. • Integral brass bushings with four M3 x 0.5" x 8mm (0.31") Philips pan head screws hold recessed panel into sloping front of case. • 1.01mm (0.04") aluminium panel with paper on one side. • Four self-adhesive feet included. • Stocked in black and grey.

Product Features: • Ideally suited for mounting printed circuit boards. • Perfect for applications where parts, sensors or indicators need to be visible. • Ice Blue version is almost totally transparent to blue, white and near white Led's, readouts and displays. • Crystal Clear version is almost totally transparent. • IR Red version is almost totally transparent to infrared devices. • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Moulded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2). • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings.

Product Features: • Ideally suited for vertical mounting of printed circuit boards; internal side walls included moulded in card guides. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP45. • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Smooth black finish with black screws.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Ergonomically designed for hand-held comfort. • Designed to meet Ip65. • Uses a one piece silicone gasket (installed). Enclosure utilized tongue and groove construction - moulded into the top and bottom halves. • Choice of three sizes - in two colours. • Moulded in flame retardant - ABS plastic (FRABS) - UV stabilized. With a grey overmould, soft plastic grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into both the top and bottom of the enclosure. Standoff screws (M2) are not included. • Front panel is an integral part of the top half of the enclosure. • Choice of two enclosure colours, light grey or black - soft side "grip" plastic colour is grey. • Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.

Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Attractively styled and ergonomically designed for use as a "Hand-Held" instrument enclosure. • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Recessed top for membrane display or pad. • Lap joint construction provides protection against dust accumulation and splashing water. • Extra deep top and ultra shallow base are specifically designed to enhanced the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Lid is secured with Philips machine screws, threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.